Bu çalışmada, beyaz eşya sanayide yatay eksendeki kapakların açılıp kapanmasını ve istenen seviyelerde dengede durmalarını sağlayan yaylı bir menteşe mekanizması ele alınmıştır. Menteşenin montajlanacak olduğu ürünün geometrik sınırları, çalışma şartları ve çalışma aralıkları tanımlıdır. Menteşeyi oluşturan her bir parça için detaylı çizimler “SolidWorks” yazılımı yardımı ile yapılmış, 3d model oluşturulmuştur. Çalışma esnasında menteşe mekanizması açma kapama ömür test cihazı ile test edilmiş ve deformasyona uğrayan parçalar belirlenmiştir. Deformasyona uğrayan parçaların sonlu elemanlar analizleri “SolidWorks Simulation” ile yapılmış, test sonuçlarının analiz verileri örtüştüğü gözlenmiştir. Deformasyona uğrayan parça üzerinde geometrik iyileştirme yapılarak sonlu elemanlar analizleri ile yapılan iyileştirmenin sayısal karşılığı değerlendirilmiş, alınan sonuçlar laboratuvar testleri ile karşılaştırmalı olarak incelenmiştir.
Ürün Geliştirme Sac Metal Şekillendirme Sonlu Elemanlar Analizi Menteşe Mekanizması Ömür Çevrim Testi
In this study, a hinge mechanism was devised to allow the horizontal axis of the white goods industry to open and close the covers and to keep the desired levels in balance. The geometric limits, operating conditions and operating ranges of the product to which the hinge will be mounted are defined. Detailed drawings for each part making up the hinge were made with the help of "SolidWorks" software, 3d model was created. During the operation, the hinge mechanism was tested with the opening and closing life tester and the parts subjected to deformation were identified. The parts that underwent the deformation were analyzed with "SolidWorks Simulation" and the test results were compared with the analysis data. The geometric improvement on the part subjected to the deformation was evaluated and the numerical equivalence of the improvement with the finite element analysis was evaluated and the results were compared with the laboratory tests.
Product Development Sheet Metal Forming Finite Element Analysis Hinge Mechanism Life Cycle Test
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Articles |
Authors | |
Publication Date | September 30, 2018 |
Submission Date | April 17, 2018 |
Published in Issue | Year 2018 Volume: 6 Issue: 3 |