Research Article
Year 2017,
Volume: 1 Issue: 1, 9 - 14, 20.03.2017
Abstract
References
- Daou, K., Wang, R., and Xia, Z. (2006). Desiccant cooling air conditioning: a review. Renewable and Sustainable Energy Reviews, vol. 10, no. 2, pp. 55-77.
- Al-Alili, A., Hwang, Y., and Radermacher, R. (2015). Performance of a desiccant wheel cycle utilizing new zeolite material: Experimental investigation. Energy, vol. 81, pp. 137-145. http://dx.doi.org/10.1016/j.energy.2014.11.084
- Ali Mandegari, M. and Pahlavanzadeh, H. (2009). Introduction of a new definition for effectiveness of desiccant wheels. Energy, vol. 34, no. 6, pp. 797-803. http://dx.doi.org/10.1016/j.energy.2009.03.001
- Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2006). Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material. Energy Conversion and Management, vol. 47, no. 15, pp. 2523-2534. http://dx.doi.org/10.1016/j.enconman.2005.10.034
- Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2007). Use of compound desiccant to develop high performance desiccant cooling system. International Journal of Refrigeration, vol. 30, no. 2, pp. 345-353. http://dx.doi.org/10.1016/j.ijrefrig.2006.04.001
- De Antonellis, S., Intini, M., Joppolo, C.M., Molinaroli, L., and Romano, F. (2015). Desiccant wheels for air humidification: An experimental and numerical analysis. Energy Conversion and Management, vol. 106, pp. 355-364. http://dx.doi.org/10.1016/j.enconman.2015.09.034
- Liu, X.-H., Zhang, T., Zheng, Y.-W., and Tu, R. (2016). Performance investigation and exergy analysis of two-stage desiccant wheel systems. Renewable Energy, vol. 86, pp. 877-888. https://doi.org/10.1016/j.renene.2015.09.025
- ASHRAE (2004). Desiccant Dehumidification and Pressure Drying Equipment, American Society of Heating, Refrigeration and Air Conditioning Engineers, Vol.22, Atlanta.
- Kara O. (2009). Design of Air-Conditioning System with Dehumidification. Çukurova University Institute of Natural and Applied Sciences, Department of Mechanical Engineering.
Year 2017,
Volume: 1 Issue: 1, 9 - 14, 20.03.2017
Abstract
Desiccant cooling
technology is an environmentally attractive alternative to conventional
mechanical air conditioning. A desiccant cooling system is a suitable way to
improve indoor air quality due to its superior humidity control and it also
provide as economical and cleaner for hot and humid regions. The most important
component of the technology is the desiccant wheel which is used to remove the
humidity of air. In this study, the analysis of dehumidification and humidity
removal process of desiccant wheel were carried out using the performance data
given by manufactures of the desiccant rotary wheel. Two parameters (Fd,
Fr) were defined for the analysis of the process. It was found that
dehumidification and regeneration processes do not occur at constant wet bulb
temperature. An equation for Fd and Fr which depends on
the humidity ratio of outdoor air and regeneration temperature was composed.
References
- Daou, K., Wang, R., and Xia, Z. (2006). Desiccant cooling air conditioning: a review. Renewable and Sustainable Energy Reviews, vol. 10, no. 2, pp. 55-77.
- Al-Alili, A., Hwang, Y., and Radermacher, R. (2015). Performance of a desiccant wheel cycle utilizing new zeolite material: Experimental investigation. Energy, vol. 81, pp. 137-145. http://dx.doi.org/10.1016/j.energy.2014.11.084
- Ali Mandegari, M. and Pahlavanzadeh, H. (2009). Introduction of a new definition for effectiveness of desiccant wheels. Energy, vol. 34, no. 6, pp. 797-803. http://dx.doi.org/10.1016/j.energy.2009.03.001
- Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2006). Experimental comparison of two honeycombed desiccant wheels fabricated with silica gel and composite desiccant material. Energy Conversion and Management, vol. 47, no. 15, pp. 2523-2534. http://dx.doi.org/10.1016/j.enconman.2005.10.034
- Jia, C.X., Dai, Y.J., Wu, J.Y., and Wang, R.Z. (2007). Use of compound desiccant to develop high performance desiccant cooling system. International Journal of Refrigeration, vol. 30, no. 2, pp. 345-353. http://dx.doi.org/10.1016/j.ijrefrig.2006.04.001
- De Antonellis, S., Intini, M., Joppolo, C.M., Molinaroli, L., and Romano, F. (2015). Desiccant wheels for air humidification: An experimental and numerical analysis. Energy Conversion and Management, vol. 106, pp. 355-364. http://dx.doi.org/10.1016/j.enconman.2015.09.034
- Liu, X.-H., Zhang, T., Zheng, Y.-W., and Tu, R. (2016). Performance investigation and exergy analysis of two-stage desiccant wheel systems. Renewable Energy, vol. 86, pp. 877-888. https://doi.org/10.1016/j.renene.2015.09.025
- ASHRAE (2004). Desiccant Dehumidification and Pressure Drying Equipment, American Society of Heating, Refrigeration and Air Conditioning Engineers, Vol.22, Atlanta.
- Kara O. (2009). Design of Air-Conditioning System with Dehumidification. Çukurova University Institute of Natural and Applied Sciences, Department of Mechanical Engineering.
There are 9 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Mechanical Engineering |
| Journal Section | Research Article |
| Authors | |
| Publication Date | March 20, 2017 |
| Published in Issue | Year 2017 Volume: 1 Issue: 1 |