Research Article
Year 2017,
Volume: 1 Issue: 4, 133 - 140, 13.12.2017
Abstract
This study aims to select optimum
materials for particular spur gear designs. An advanced material selection technique
called Ashby’s method was used to determine suitable materials according to
their material index. The method requires objective function, constraint and
free variables. Objective function was set to minimizing mass based on the
bending strength whereas the bending fatigue failure criteria is the
constraint. All the input parameters and modification factors during the design
process were taken as free variables. The suitable materials were ranked
according to their index value then subjected to gear designs. A number of gear
designs were performed with different types of materials to show the
differences between weights of the parts. Module and face width results were
also compared between each other. Lightweight and high strength materials
suitable for spur gear designs were found out. And up to 63% weight reduction
was achieved compared to conventional gear materials.
References
- Juvinall R.C., Marshek K.M., 2011. Fundamentals of Machine Component Design. Wiley 5th Edition, 928 pages.
- Budynas R.G. and Nisbett J.K., 2011. Shigley's Mechanical Engineering Design. Ninth Edition, McGraw-Hill, 1120 pages.
- Li S., 2007. Finite Element Analyses For Contact Strength and Bending Strength of A Pair of Spur Gears With Machining Errors, Assembly Errors and Tooth Modifications. Mechanism and Machine Theory 42, 88–114.
- Pedersen N.L., Raju P.R., Sreenivasulu V., Rao P.D. and Kiran C.U., 2010. Improving Bending Stress in Spur Gears Using Asymmetric Gears and Shape Optimization. Mechanism and Machine Theory 45, pp.1707–1720.
- Sankar S. and Nataraj M., 2011. Profile Modification - A Design Approach for Increasing the Tooth Strength in Spur Gear. The International Journal of Advanced Manufacturing Technology, 55:1-10.
- Geren N. and Baysal M.M., 2000. Expert System Development for Spur Gear Design. 9. International Conference on Machine Design and Production.
- Mendi F., Başkal T., Boran K. and Boran F.E., 2010. Optimization of Module, Shaft Diameter and Rolling Bearing for Spur Gear through Genetic Algorithm. Expert Systems with Applications, 37, 8058–8064.
- Parthiban A., Raju P.R., Sreenivasulu V., Rao P.D. and Kiran C.U., 2013. Profile Modification for Increasing the Tooth Strength in Spur Gear using CAD & CAE. International Journal of Innovations in Engineering and Technology, Vol.2, Issue 1, pp. 231-241.
- Gupta B., Choubey A. and Varde G.V., 2012. Contact Stress Analysis of Spur Gear. International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 4, 7 pages.
- Jebur A.K., Khan I.A. and Nath Y., 2011. Numerical and Experimental Dynamic Contact of Rotating Spur Gear. Modern Applied Science, Vol. 5, No. 2, pp. 254-263.
- Tiwari S.K. and Joshi U.K., 2012, Stress Analysis of Mating Involute Spur Gear teeth. International Journal of Engineering Research and Technology, Volume 1, Issue 9.
- Marjanovic N., Isailovic B., Marjanovic V., Milojevic Z., Blagojevic M. and Bojic M., 2012. A Practical Approach to the Optimization of Gear Trains with Spur Gears, Mechanism and Machine Theory, 53, pp. 1–16.
- Golabi S., Fesharaki J.J. and Yazdipoor M., 2014. Gear Train Optimization Based on Minimum Volume/Weight Design, Mechanism and Machine Theory, 73, pp. 197–217.
- Stephen P. Radzevich. 2012. Dudley’s Handbook of Practical Gear Design and Manufacture, CRC Press.
- Michael F. Ashby, 2011. Materials Selection in Mechanical Design, 4th edition, Elsevier Ltd.
- CES Selector 2016, www.grantadesign.com
- Dieter and Schmidt, 2009. Engineering Design, 4th edition. McGraw Hill Company.
- Roos F. 2004. Relations between Size and Gear Ratio in Spur and Planetary Gear Trains, Technical Report, Royal Institute of Technology, Stockholm.
- Geren N., 2017. Makina Mühendisliğine Giriş. Birinci Baskı, published in Turkish, İstanbul papatya bilim 667 pages.
- https://www.wolfram.com/mathematica/
Year 2017,
Volume: 1 Issue: 4, 133 - 140, 13.12.2017
Abstract
References
- Juvinall R.C., Marshek K.M., 2011. Fundamentals of Machine Component Design. Wiley 5th Edition, 928 pages.
- Budynas R.G. and Nisbett J.K., 2011. Shigley's Mechanical Engineering Design. Ninth Edition, McGraw-Hill, 1120 pages.
- Li S., 2007. Finite Element Analyses For Contact Strength and Bending Strength of A Pair of Spur Gears With Machining Errors, Assembly Errors and Tooth Modifications. Mechanism and Machine Theory 42, 88–114.
- Pedersen N.L., Raju P.R., Sreenivasulu V., Rao P.D. and Kiran C.U., 2010. Improving Bending Stress in Spur Gears Using Asymmetric Gears and Shape Optimization. Mechanism and Machine Theory 45, pp.1707–1720.
- Sankar S. and Nataraj M., 2011. Profile Modification - A Design Approach for Increasing the Tooth Strength in Spur Gear. The International Journal of Advanced Manufacturing Technology, 55:1-10.
- Geren N. and Baysal M.M., 2000. Expert System Development for Spur Gear Design. 9. International Conference on Machine Design and Production.
- Mendi F., Başkal T., Boran K. and Boran F.E., 2010. Optimization of Module, Shaft Diameter and Rolling Bearing for Spur Gear through Genetic Algorithm. Expert Systems with Applications, 37, 8058–8064.
- Parthiban A., Raju P.R., Sreenivasulu V., Rao P.D. and Kiran C.U., 2013. Profile Modification for Increasing the Tooth Strength in Spur Gear using CAD & CAE. International Journal of Innovations in Engineering and Technology, Vol.2, Issue 1, pp. 231-241.
- Gupta B., Choubey A. and Varde G.V., 2012. Contact Stress Analysis of Spur Gear. International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 4, 7 pages.
- Jebur A.K., Khan I.A. and Nath Y., 2011. Numerical and Experimental Dynamic Contact of Rotating Spur Gear. Modern Applied Science, Vol. 5, No. 2, pp. 254-263.
- Tiwari S.K. and Joshi U.K., 2012, Stress Analysis of Mating Involute Spur Gear teeth. International Journal of Engineering Research and Technology, Volume 1, Issue 9.
- Marjanovic N., Isailovic B., Marjanovic V., Milojevic Z., Blagojevic M. and Bojic M., 2012. A Practical Approach to the Optimization of Gear Trains with Spur Gears, Mechanism and Machine Theory, 53, pp. 1–16.
- Golabi S., Fesharaki J.J. and Yazdipoor M., 2014. Gear Train Optimization Based on Minimum Volume/Weight Design, Mechanism and Machine Theory, 73, pp. 197–217.
- Stephen P. Radzevich. 2012. Dudley’s Handbook of Practical Gear Design and Manufacture, CRC Press.
- Michael F. Ashby, 2011. Materials Selection in Mechanical Design, 4th edition, Elsevier Ltd.
- CES Selector 2016, www.grantadesign.com
- Dieter and Schmidt, 2009. Engineering Design, 4th edition. McGraw Hill Company.
- Roos F. 2004. Relations between Size and Gear Ratio in Spur and Planetary Gear Trains, Technical Report, Royal Institute of Technology, Stockholm.
- Geren N., 2017. Makina Mühendisliğine Giriş. Birinci Baskı, published in Turkish, İstanbul papatya bilim 667 pages.
- https://www.wolfram.com/mathematica/
There are 20 citations in total.
Details
| Subjects | Mechanical Engineering |
|---|---|
| Journal Section | Research Article |
| Authors | |
| Publication Date | December 13, 2017 |
| Acceptance Date | November 23, 2017 |
| Published in Issue | Year 2017 Volume: 1 Issue: 4 |