BibTex RIS Cite
Year 2018, Volume: 7 Issue: 1, 48 - 57, 03.04.2018
https://doi.org/10.18245/ijaet.438047

Abstract

References

  • Alaneme, K. (2012). Influence of thermo-mechanical treatment on the tensile behaviour and CNT evaluated fracture toughness of borax premixed SiCp reinforced AA 6063 composites. International Journal of Mechanical and Materials Engineering, 7(1), 96-100.
  • Anonymous. What is a signal factor. Design of Experiment. Retrieved from http://support.minitab.com/en-us/minitab/17/topic-library/modeling-statistics/doe/taguchi-designs/what-is-a-signal-factor
  • Benson, J. (2011). Antimicrobial Copper Kills 97 Percent of Deadly Bacteria, Reduces Infection Rate by 40 Percent. 1st International Conference on Prevention and Infection Control (ICPIC). Retrieved from http://www.naturalnews.com/033008_copper_antimicrobial.html
  • Cho, M. H., Kim, S. J., Kim, D., & Jang, H. (2005). Effects of ingredients on tribological characteristics of a brake lining: an experimental case study. Wear, 258(11–12), 1682-1687. doi:http://dx.doi.org/10.1016/j.wear.2004.11.021
  • Eriksson, M., Bergman, F., & Jacobson, S. (2002). On the nature of tribological contact in automotive brakes. Wear, 252(1–2), 26-36. doi:http://dx.doi.org/10.1016/S0043-1648(01)00849-3
  • Eriksson, M., & Jacobson, S. (2000). Tribological surfaces of organic brake pads. Tribology International, 33(12), 817-827. doi:http://dx.doi.org/10.1016/S0301-679X(00)00127-4
  • Ficici, F., Durat, M., & Kapsiz, M. (2014). Optimization of tribological parameters for a brake pad using Taguchi design method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36(3), 653-659.
  • German, R. M. (2005). Powder Metallurgy and Particulate Materals Processing: The Processes, Materials, Products, Properties and Applications: Metal Powder Industries Federation.
  • Girija, E. K., Kumar, G. S., Thamizhavel, A., Yokogawa, Y., & Kalkura, S. N. (2011). Fabrication of Hydroxyapatite-Calcite Nanocomposite. In R. Narayan, P. Colombo, S. Widjaja, & D. Singh (Series Eds.), Advances in Bioceramics and Porous Ceramics VIII : Ceramic Engineering and Science Proceedings, Vol. 32. (pp. 11). doi:10.1002/9781118095263.ch1
  • Ibhadode, A., & Dagwa, I. (2008). Development of Asbestos-free Friction Lining Material From Palm Kernel Shell. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30(2), 166-173. doi:10.1590/S1678-58782008000200010
  • Jaafar, T. R., Selamat, M. S., & Kasiran, R. (2012). Selection of Best Formulation for Semi-Metallic Brake Friction Materials Development. In K. Kondoh (Ed.), Powder Metallurgy (pp. 30).
  • Jang, H., Ko, K., Kim, S. J., Basch, R. H., & Fash, J. W. (2004). The Effect of Metal Fibers on The Friction Performance of Automotive Brake Friction Materials. Wear, 256(3-4), 406-414. doi:10.1016/s0043-1648(03)00445-9
  • Kim, S. J., Kim, K. S., & Jang, H. (2003). Optimization of manufacturing parameters for a brake lining using Taguchi method. Journal of Materials Processing Technology, 136(1–3), 202-208. doi:http://dx.doi.org/10.1016/S0924-0136(03)00159-6
  • Lu, Y. (2006). A Combinatorial Approach for Automotive Friction Materials: Effects of Ingredients on Friction Performance. Composites Science and Technology, 66(3), 591-598.
  • Maleque, M., & Atiqah, A. (2013). Development and Characterization of Coir Fibre Reinforced Composite Brake Friction Materials. Arabian Journal for Science and Engineering, 38(11), 3191-3199.
  • Maleque, M., Atiqah, A., Talib, R., & Zahurin, H. (2012). New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering, 7(2).
  • Mutlu, Sugözü, I., & Keskin, A. (2015). The effects of porosity in friction performance of brake pad using waste tire dust. Polímeros, 25(5), 440-446.
  • Mutlu, I., Eldogan, O., & Findik, F. (2006). Tribological Properties of Some Phenolic Composites Suggested for Automotive Brakes. Tribology International, 39(4), 317-325. doi:10.1016/j.triboint.2005.02.002
  • Ntziachristos, L., & Boulter, P. (2009). Road vehicle tyre and brake wear (9/2009). Retrieved from
  • Sellami, A., Kchaou, M., Elleuch, R., Cristol, A.-L., & Desplanques, Y. (2014). Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material. Materials & Design, 59, 84-93.
  • Singh, K. H., Kumar, A., & Kumar, R. (2014). Optimization of Quality and Performance of Brake Pads Using Taguchi’s Approach. International Journal of Scientific & Engineering Research, 5(7), 632-639.
  • Talib, R. J., Muchtar, A., & Azhari, C. H. (2007). The Performance of Semi–Metallic Friction Materials For Passenger Cars. Jurnal Teknologi, 46(1), 53–72.
  • Zaharudin, A., Talib, R., Berhan, M., Budin, S., & Aziurah, M. (2012). Taguchi Method for Optimizing The Manufacturing Parameters of Friction Materials. International Journal of Mechanical and Materials Engineering, 8(2), 83-88.

The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method

Year 2018, Volume: 7 Issue: 1, 48 - 57, 03.04.2018
https://doi.org/10.18245/ijaet.438047

Abstract

Brake pads are generally consisted of five different component groups. These groups are named as reinforcements, binders, abrasives, lubricants and fillers. Each of these groups has its own function such as to improve friction property, wear resistance, to increase strength, and to reduce porosity and noise. In this study, Miscanthus as reinforcement, cashew as lubricant, alumina as abrasive, calcite as filler, and phenolic resin as binder were used to produce composite ecological brake pad samples. Brake pads are usually developed through trial and error method and therefore, the evaluation process became complicated and time consuming due to the multiplicity of components, randomly selected mixing ratios, results obtained from the experiments, etc. and so Taguchi method is utilized to get rid of these difficulties of trial and error method. This study was made in order to determine the influence level of the brake pad ingredients and some production parameters to the density and porosity features of the brake pad samples. The ecological brake pad samples were manufactured and experiments were conducted to Taguchi Method L32 orthogonal array. According to the ANOVA (Analysis of Variance) tables and other graphical results obtained from Taguchi method, the density feature of brake pad samples are more influenced by the mixture proportion factors and moulding temperature, curing time and curing temperature factors have a minor effect on porosity feature of brake pad samples.

References

  • Alaneme, K. (2012). Influence of thermo-mechanical treatment on the tensile behaviour and CNT evaluated fracture toughness of borax premixed SiCp reinforced AA 6063 composites. International Journal of Mechanical and Materials Engineering, 7(1), 96-100.
  • Anonymous. What is a signal factor. Design of Experiment. Retrieved from http://support.minitab.com/en-us/minitab/17/topic-library/modeling-statistics/doe/taguchi-designs/what-is-a-signal-factor
  • Benson, J. (2011). Antimicrobial Copper Kills 97 Percent of Deadly Bacteria, Reduces Infection Rate by 40 Percent. 1st International Conference on Prevention and Infection Control (ICPIC). Retrieved from http://www.naturalnews.com/033008_copper_antimicrobial.html
  • Cho, M. H., Kim, S. J., Kim, D., & Jang, H. (2005). Effects of ingredients on tribological characteristics of a brake lining: an experimental case study. Wear, 258(11–12), 1682-1687. doi:http://dx.doi.org/10.1016/j.wear.2004.11.021
  • Eriksson, M., Bergman, F., & Jacobson, S. (2002). On the nature of tribological contact in automotive brakes. Wear, 252(1–2), 26-36. doi:http://dx.doi.org/10.1016/S0043-1648(01)00849-3
  • Eriksson, M., & Jacobson, S. (2000). Tribological surfaces of organic brake pads. Tribology International, 33(12), 817-827. doi:http://dx.doi.org/10.1016/S0301-679X(00)00127-4
  • Ficici, F., Durat, M., & Kapsiz, M. (2014). Optimization of tribological parameters for a brake pad using Taguchi design method. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36(3), 653-659.
  • German, R. M. (2005). Powder Metallurgy and Particulate Materals Processing: The Processes, Materials, Products, Properties and Applications: Metal Powder Industries Federation.
  • Girija, E. K., Kumar, G. S., Thamizhavel, A., Yokogawa, Y., & Kalkura, S. N. (2011). Fabrication of Hydroxyapatite-Calcite Nanocomposite. In R. Narayan, P. Colombo, S. Widjaja, & D. Singh (Series Eds.), Advances in Bioceramics and Porous Ceramics VIII : Ceramic Engineering and Science Proceedings, Vol. 32. (pp. 11). doi:10.1002/9781118095263.ch1
  • Ibhadode, A., & Dagwa, I. (2008). Development of Asbestos-free Friction Lining Material From Palm Kernel Shell. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 30(2), 166-173. doi:10.1590/S1678-58782008000200010
  • Jaafar, T. R., Selamat, M. S., & Kasiran, R. (2012). Selection of Best Formulation for Semi-Metallic Brake Friction Materials Development. In K. Kondoh (Ed.), Powder Metallurgy (pp. 30).
  • Jang, H., Ko, K., Kim, S. J., Basch, R. H., & Fash, J. W. (2004). The Effect of Metal Fibers on The Friction Performance of Automotive Brake Friction Materials. Wear, 256(3-4), 406-414. doi:10.1016/s0043-1648(03)00445-9
  • Kim, S. J., Kim, K. S., & Jang, H. (2003). Optimization of manufacturing parameters for a brake lining using Taguchi method. Journal of Materials Processing Technology, 136(1–3), 202-208. doi:http://dx.doi.org/10.1016/S0924-0136(03)00159-6
  • Lu, Y. (2006). A Combinatorial Approach for Automotive Friction Materials: Effects of Ingredients on Friction Performance. Composites Science and Technology, 66(3), 591-598.
  • Maleque, M., & Atiqah, A. (2013). Development and Characterization of Coir Fibre Reinforced Composite Brake Friction Materials. Arabian Journal for Science and Engineering, 38(11), 3191-3199.
  • Maleque, M., Atiqah, A., Talib, R., & Zahurin, H. (2012). New natural fibre reinforced aluminium composite for automotive brake pad. International Journal of Mechanical and Materials Engineering, 7(2).
  • Mutlu, Sugözü, I., & Keskin, A. (2015). The effects of porosity in friction performance of brake pad using waste tire dust. Polímeros, 25(5), 440-446.
  • Mutlu, I., Eldogan, O., & Findik, F. (2006). Tribological Properties of Some Phenolic Composites Suggested for Automotive Brakes. Tribology International, 39(4), 317-325. doi:10.1016/j.triboint.2005.02.002
  • Ntziachristos, L., & Boulter, P. (2009). Road vehicle tyre and brake wear (9/2009). Retrieved from
  • Sellami, A., Kchaou, M., Elleuch, R., Cristol, A.-L., & Desplanques, Y. (2014). Study of the interaction between microstructure, mechanical and tribo-performance of a commercial brake lining material. Materials & Design, 59, 84-93.
  • Singh, K. H., Kumar, A., & Kumar, R. (2014). Optimization of Quality and Performance of Brake Pads Using Taguchi’s Approach. International Journal of Scientific & Engineering Research, 5(7), 632-639.
  • Talib, R. J., Muchtar, A., & Azhari, C. H. (2007). The Performance of Semi–Metallic Friction Materials For Passenger Cars. Jurnal Teknologi, 46(1), 53–72.
  • Zaharudin, A., Talib, R., Berhan, M., Budin, S., & Aziurah, M. (2012). Taguchi Method for Optimizing The Manufacturing Parameters of Friction Materials. International Journal of Mechanical and Materials Engineering, 8(2), 83-88.
There are 23 citations in total.

Details

Journal Section Article
Authors

Mahmut Ünaldı

Recai Kuş

Publication Date April 3, 2018
Submission Date November 5, 2017
Published in Issue Year 2018 Volume: 7 Issue: 1

Cite

APA Ünaldı, M., & Kuş, R. (2018). The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method. International Journal of Automotive Engineering and Technologies, 7(1), 48-57. https://doi.org/10.18245/ijaet.438047
AMA Ünaldı M, Kuş R. The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method. International Journal of Automotive Engineering and Technologies. April 2018;7(1):48-57. doi:10.18245/ijaet.438047
Chicago Ünaldı, Mahmut, and Recai Kuş. “The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method”. International Journal of Automotive Engineering and Technologies 7, no. 1 (April 2018): 48-57. https://doi.org/10.18245/ijaet.438047.
EndNote Ünaldı M, Kuş R (April 1, 2018) The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method. International Journal of Automotive Engineering and Technologies 7 1 48–57.
IEEE M. Ünaldı and R. Kuş, “The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method”, International Journal of Automotive Engineering and Technologies, vol. 7, no. 1, pp. 48–57, 2018, doi: 10.18245/ijaet.438047.
ISNAD Ünaldı, Mahmut - Kuş, Recai. “The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method”. International Journal of Automotive Engineering and Technologies 7/1 (April 2018), 48-57. https://doi.org/10.18245/ijaet.438047.
JAMA Ünaldı M, Kuş R. The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method. International Journal of Automotive Engineering and Technologies. 2018;7:48–57.
MLA Ünaldı, Mahmut and Recai Kuş. “The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method”. International Journal of Automotive Engineering and Technologies, vol. 7, no. 1, 2018, pp. 48-57, doi:10.18245/ijaet.438047.
Vancouver Ünaldı M, Kuş R. The Determination of the Effect of Mixture Proportions and Production Parameters on Density and Porosity Features of Miscanthus Reinforced Brake Pads by Taguchi Method. International Journal of Automotive Engineering and Technologies. 2018;7(1):48-57.