Abstract
References
- 1 Abdullah, O.I., Schlattmann, J., Al-shabibi. ''A.M. Stresses and deformations analysis of a dry friction clutch system'', Tribology in Industry, 35,(2), 155-162, 2013.
- 2 Karpat, F., Dogan, O., Yuce, C., Kaya, N., Cengiz, G. ''The investigation of stress distribution on the tractor clutch finger mechanism by using finite element method'', Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, November 14-20, Montreal, Canada. doi:10.1115/IMECE2014-3923,2014.
- 3 Dogan, O., Karpat, F., Kaya, N., Yuce, C., Genc, M.O., Yavuz, N. ''Optimum design of tractor clutch PTO finger by using topology and shape optimization'', Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition IMECE2015 November 13-19, 2015, Houston, Texas, USA doi:10.1115/IMECE2015-52008,2015.
- 4 Dogan, O., Karpat, F., Yuce, C., Kaya, N., Yavuz, N., Sen, H. ''A novel design procedure for tractor clutch fingers by using optimization and response surface methods'', Journal of Mechanical Science and Technology, 30, (6), 2615-2625, 2016.
- 5 Özbakış M. ''Debriyaj sistemlerinde kullanılan diyafram yayların karakteristiğinin incelenmesi ve optimizasyonu'', M.Sc Thesis, Mechanical Engineering, Dokuz Eylül University, Turkey, 2008.
- 6 Li-jun, Z., Tao, L., Bao-Yu, S. ''Optimum design of automobile diaphragm spring clutch'', IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008, Harbin, China, 2008.
- 7 Purohit, R., Khitoliya, P., Koli, D.K. ''Design and finite element analysis of an automotive clutch assembly'', Procedia Materials Science, 6, 490 – 502, 2014.
Abstract
Clutch
components rotating at high speed remains under the influence of high
centrifugal forces. Therefore; it should be known that the speed at which
damage will begin. For this purpose, the burst test is performed. Besides this
test by using finite element method, this test could be done in virtual
environments. Thus, it is saving time and money. This paper presents an
approach for validation process of tractor clutch cover. Firstly the real burst
test setup is defined and the test conditions are
described. Secondly developed finite element model which simulate the real test
conditions is defined. As a result of the study, the tractor clutch cover stays
durable at 6560 rpm. When it is compared real working conditions the safety
factor of 3.5 is calculated for the clutch cover.
References
- 1 Abdullah, O.I., Schlattmann, J., Al-shabibi. ''A.M. Stresses and deformations analysis of a dry friction clutch system'', Tribology in Industry, 35,(2), 155-162, 2013.
- 2 Karpat, F., Dogan, O., Yuce, C., Kaya, N., Cengiz, G. ''The investigation of stress distribution on the tractor clutch finger mechanism by using finite element method'', Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, November 14-20, Montreal, Canada. doi:10.1115/IMECE2014-3923,2014.
- 3 Dogan, O., Karpat, F., Kaya, N., Yuce, C., Genc, M.O., Yavuz, N. ''Optimum design of tractor clutch PTO finger by using topology and shape optimization'', Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition IMECE2015 November 13-19, 2015, Houston, Texas, USA doi:10.1115/IMECE2015-52008,2015.
- 4 Dogan, O., Karpat, F., Yuce, C., Kaya, N., Yavuz, N., Sen, H. ''A novel design procedure for tractor clutch fingers by using optimization and response surface methods'', Journal of Mechanical Science and Technology, 30, (6), 2615-2625, 2016.
- 5 Özbakış M. ''Debriyaj sistemlerinde kullanılan diyafram yayların karakteristiğinin incelenmesi ve optimizasyonu'', M.Sc Thesis, Mechanical Engineering, Dokuz Eylül University, Turkey, 2008.
- 6 Li-jun, Z., Tao, L., Bao-Yu, S. ''Optimum design of automobile diaphragm spring clutch'', IEEE Vehicle Power and Propulsion Conference (VPPC), September 3-5, 2008, Harbin, China, 2008.
- 7 Purohit, R., Khitoliya, P., Koli, D.K. ''Design and finite element analysis of an automotive clutch assembly'', Procedia Materials Science, 6, 490 – 502, 2014.
Details
| Subjects | Mechanical Engineering |
|---|---|
| Journal Section | Research Articles |
| Authors | |
| Publication Date | April 30, 2017 |
| Submission Date | March 27, 2017 |
| Published in Issue | Year 2017 Volume: 1 Issue: 1 |
Cite
International Journal of Automotive Science and Technology (IJASTECH) is published by Society of Automotive Engineers Turkey
