Al-13.6Cu-6Si (%ağ.) üçlü alaşımı sabit bir katılaştırma hızında (V=17.4 μm/s), farklı sıcaklık gradyentlerinde (1.6-6.12 K/mm) ve sabit bir sıcaklık gradyentinde (G=4.64 K/mm) farklı katılaştırma hızlarında (8.3-166.0 μm/s) Bridgman tipi doğrusal katılaştırma fırını içerisinde tek yönlü olarak doğrusal bir şekilde katılaştırılmıştır. Katılaştırma işlemi tamamlanan alaşım numuneleri metalografik işlemlere tabi tutularak mikroyapıları açığa çıkartılmıştır. Mikroyapı parametreleri (λ1 ve λ2) üzerine katılaştırma parametrelerinin (V ve G) etkisi incelenmiştir. Ayrıca mikrosertliğin katılaşma hızına, sıcaklık gradyentine ve mikroyapı parametrelerine bağımlılığı araştırılmıştır. Bunun yanı sıra elde edilen sonuçlar literatürde yer alan benzer deneysel sonuçlarla kıyaslanmıştır.
Bu proje Niğde Üniversitesi Bilimsel Araştırma Projeleri Birimi tarafından FEB 2011/08 kod numarası ile desteklenmiştir.
FEB 2011/08
Yazarlar bu mali destek için Niğde Üniversitesi Bilimsel Araştırma Projesi'ne teşekkür eder.
The Al-13.6Cu-6Si (wt.%) ternary alloy was solidified upward unidirectional directionally in a Bridgman-type directional solidification furnace at a constant solidification rate (V=17.4 μm/s), different temperature gradients (1.6-6.12 K/mm), and different solidification rates (8.3-166.0 μm/s) at a constant temperature gradient (G=4.64 K/mm). After completion of the solidification process, the alloy samples were subjected to metallographic treatments to reveal their microstructures. The effect of solidification parameters (V and G) on microstructure parameters (λ1 and λ2) was examined. In addition, the dependence of microhardness on solidification rate, temperature gradient, and microstructure parameters was investigated. The results were also compared with similar experimental results reported in the literature.
FEB 2011/08
Primary Language | Turkish |
---|---|
Subjects | Engineering, Material Design and Behaviors |
Journal Section | Materials and Metallurgical Engineering |
Authors | |
Project Number | FEB 2011/08 |
Early Pub Date | June 8, 2023 |
Publication Date | July 15, 2023 |
Submission Date | April 11, 2023 |
Acceptance Date | May 24, 2023 |
Published in Issue | Year 2023 Volume: 12 Issue: 3 |