Research Article
BibTex RIS Cite

Farklı Kalınlıklara Sahip Kivi Dilimlerinin Dondurulması ve Kurutma İşlemi Özelliklerinin İncelenmesi

Year 2023, Volume: 26 Issue: 1, 415 - 423, 27.03.2023

Bahadir Acar Abdullah Dağdeviren Prof. Dr. Mehmet Özkaymak Abdillahi Robleh Guinaleh

https://doi.org/10.2339/politeknik.796237
Cited By: 1

Abstract

Bu çalışmada kivi meyvesi 5 mm ve 7 mm kalınlıklarında dilimlenmiş ve dilimlenen numuneler dondurularak kurutma cihazına konulmuştur. Kurutma işlemi sırasında numunelerin ağırlık kayıpları ölçülerek kaydedildi ve bu ölçümler kullanılarak kinetik kurutma modelleri gerçekleştirildi. Toplam 14 saat süren deneyde 100 gr ağırlıktaki her bir kivi diliminin ağırlık kayıpları iki saatte bir ölçülerek nem oranları (MR) da hesaplanmıştır. Deneysel sonuçlar ışığında MATLAB yazılımı kullanılarak 8 farklı kinetik kurutma modeli gerçekleştirilmiştir. Sonuç olarak, 5 mm ve 7 mm kalınlıklar için en düşük indirgenmiş ki-kare (X2) değerleri sırasıyla yaklaşık 8.261x10-6 ve 1.705x10-5 olarak hesaplandı, kök ortalama kare hata değerleri (RMSE) ise 0.002865 ve 0.004146 hesaplanmıştır. Ayrıca, her iki kalınlık için belirleme katsayısı (R2) 1'e en yakın en yüksek sonuç olan 0.9999 olarak hesaplanmıştır. 8 farklı kinetik kurutma modeli arasından kivi ürünlerinin her iki kalınlıkları içinde uygun olan kinetik kurutma modelinin Logaritmik kurutma modeli olduğu gözlemlenmiştir. Nem içerikleri ve kuruma oranları göz önüne alındığında 7 mm kalınlığındaki kivi dilimlerinin kuruma hızının, daha yüksek nem içeriği nedeniyle yavaş davranış sergilediği görülmüştür. Ayrıca 5 mm ve 7 mm kalınlığındaki numuneler için efektif difüzivite katsayılarının sırasıyla 2,25 × 10-10 m2/s ve 3,28 × 10-10 m2/s olarak hesaplanmıştır.

Keywords

Kurutma kinetiği kivinin kurutulması kinetik kurutma modeli logaritmik model

Supporting Institution

Karabük Üniversitesi

Thanks

Karabük Ümiversitesi Teknoloji Fakültesi Laboratuvar

References

  • [1] Folletta P. A., Jamieson L., Hamilton L., Wall M., “New associations and host status: Infestability of kiwifruit by the fruit fly species Bactrocera dorsalis, Zeugodacus cucurbitae, and Ceratitis capitata (Diptera: Tephritidae)”, Crop Protection, 115: 113–121, (2019).
  • [2] Cassano A., Figoli A., Tagarelli A., Sindona G., Drioli E. “Integrated membrane process for the production of highly nutritional kiwifruit juice”, Desalination, 189: 21–30, (2006).
  • [3] Latocha P., Krupa T., Wolosiak R., Worobiej E., “Antioxidant activity and chemical difference in fruit of different Actinidia sp”, International Journal of Food Science and Nutrition, 61(4): 381–394, (2010).
  • [4] Dias M., Caleja C., Pereira C., Calhelda R.C., Kostic M., Sokovic M., Tavares D., Baraldi I. J., Barros L., Ferreira I. C. F. R., “Chemical composition and bioactive properties of byproducts from two different kiwi varieties”, Food Research International, 127: 108753, (2020).
  • [5] Özdemir M.B., Aktaş M., Şevik S., Khanlari A., “Modeling of a convective-infrared kiwifruit drying process”, International journal of Hydrogen Energy, 42: 18005–18013, (2017).
  • [6] Ercisli S., Esitken A., Cangi R., Sahin F., Adventitious root formation of kiwifruit in relation to sampling date, IBA and Agrobacterium rubi inoculation, Plant Growth Regulation, 41: 133–137, (2003).
  • [7] Tavarini S., Degl’lnnocenti E., Remorini D., Massai R., Guidi L., Antioxidant capacity, ascorbic acid, total phenols and carotenoids during harvest and after storage of Hayward kiwifruit, Food Chemistry, 107: 282–288, (2008).
  • [8] Simal S., Femenia A., Carcel J. A., Rosello C., Mathematical modelling of the drying curves of kiwi fruits: influence of the ripening stage, Journal of the Science of Food and Agriculture, 85: 425–432, (2005).
  • [9] Beirao-da C.S., Steiner A., Correia L., Leitao E., Empis J., Moldao M. M., Influence of moderate heat treatments on physical and chemical characteristics of kiwifruits slices, European Food Research and Technology, 226: 641–651, (2008).
  • [10] Kunzek H., Müller S., Vetter S., Godeck R., The significance of physicochemical properties of plant cell wall materials for the development of innovative food products, European Food Research and Technology, 214: 361–376, (2002).
  • [11] Goula A.M. and Adamopoulos K.G., Retention of ascorbic acid during drying of tomato halves and tomato pulp, Drying Technology, 24: 57–64, (2006).
  • [12] Uddin M.S., Hawlader M., Zhou L., Kinetics of ascorbic acid degradation in dried kiwifruits during storage, Drying Technology, 19(2): 437–446, (2001).
  • [13] Orikasa T., Wu L., Shiina T., Tagawa A., Drying characteristics of kiwifruit during hot air drying, Journal of Food Engineering, 85: 303–308, (2008).
  • [14] Femenia A., Sastre-Serrano G., Simal S., Garau M.C., Eim V.S., Rosello C., Effects of air-drying temperature on the cell walls of kiwifruit processed at different stages of ripening, LWT, Food Science and Technology, 42: 106–112, (2009).
  • [15] Zhou X., Ramaswamy H., Qu Y., Xu R., Wang S., Combined radio frequency-vacuum and hot air drying of kiwifruits: Effect on drying uniformity, energy efficiency and product quality, Innovative Food Science and Emerging Technologies, 56: 102182, (2019).
  • [16] Simal S., Femenia A., Garau M.C., Rossello C., Use of exponential, Page’s and diffusional models to simulate the drying kinetics of kiwi fruit, Journal of Food Engineering, 66: 323–328, (2005).
  • [18] Maskan M., Drying, shrinkage and rehydration characteristics of kiwifruits during hot air and microwave drying, Journal of Food Engineering, 48: 177–182, (2001).
  • [19] Variyenli H.I., Güneş enerjisi destekli düz ve hapsedici yüzeyli kurutma fırınlarının performanslarının kivi kurutarak karşılaştırılması, Politeknik Dergisi, 21: 3, 723-729, (2018).
  • [20] Kaya A., Aydın O., Dincer I., Experimental and numerical investigation of heat and mass transfer during drying of Hayward kiwi fruits (Actinidia Deliciosa Planch), Journal of Food Engineering, 88: 323–330, (2008).
  • [21] Sadıkoglu H., Liapis A., Crosser O., Optimal control of the primary and secondary drying stages of bulk solution freeze drying in trays, Drying Technology, 16: 399-431, (2007).
  • [22] Acar B., Sadikoglu H., Doymaz I., Freeze-Drying Kinetics And Diffusion Modeling Of Saffron (Crocus Satıvus L.), Journal of Food Processing and Preservation, 39: 142–149, (2015).
  • [23] Menges H.O. and Ertekin C., Mathematical modeling of thin layer drying of Golden apples, Journal of Food Engineering, 77: 119-125, (2006).
  • [24] Gálvez A.V., Aranda M., Sainz C.B., Uribe E., Empirical modeling of drying process for apple (Cv. Granny Smith) slices at different air temperatures, Journal of Food Processing Preservation, 32: 972–986, (2008).
  • [25] Rayaguru K., Routray W., Mathematical modelling and quality parameters of air-dried betel leaf (Piper betle L.), Journal of Food Processing Preservation, 35: 394–401, (2011).
  • [26] Zogzas N.P., Maraulis Z.B., Marinos-Kouirs D., Moisture diffusivity data compilation in foodstuffs, Drying Technology, 14, 2225–2253, (1996).

Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process

Year 2023, Volume: 26 Issue: 1, 415 - 423, 27.03.2023

Bahadir Acar Abdullah Dağdeviren Prof. Dr. Mehmet Özkaymak Abdillahi Robleh Guinaleh

https://doi.org/10.2339/politeknik.796237
Cited By: 1

Abstract

In the study, the kiwi fruit was sliced into various thicknesses as 5 mm and 7 mm, and those sliced specimens were put in the freeze-drying device. the mass losses of the specimens were measured and saved during the drying process and kinetic drying models were performed using those measurements. The mass losses of each kiwi slices in 100 g mass were measured every two hours in the experiment lasting 14 hours in total and moisture ratios (MR) were calculated as well. Considering the experimental results, 8 different kinetics drying models were performed using MATLAB software. As a result, the lowest reduced chi-square (X2) values for 5 mm and 7 mm thicknesses were calculated about 8.261x10-6 and 1.705x10-5 respectively, the root means square error values (RMSE) were about 0.002865 and 0.004146, respectively. Also, the coefficient of determination (R2) for both thicknesses was calculated as 0.9999 which was the highest result closest to 1. Among the 8 different kinetic drying models, the Logarithmic model was chosen as a proper kinetic drying model for kiwi products. When the moisture contents and drying rates were considered it was seen that the drying rate of kiwi slices with 7 mm thickness exhibited slow behavior because of the higher moisture content. Besides, it was determined that the effective diffusivity coefficients for specimens with 5 mm and 7 mm thickness were calculated as 2.25 × 10-10 m2/s and 3.28 × 10-10 m2/s respectively.

Keywords

Drying kinetics drying of kiwi kinetic drying model logarithmic model

References

  • [1] Folletta P. A., Jamieson L., Hamilton L., Wall M., “New associations and host status: Infestability of kiwifruit by the fruit fly species Bactrocera dorsalis, Zeugodacus cucurbitae, and Ceratitis capitata (Diptera: Tephritidae)”, Crop Protection, 115: 113–121, (2019).
  • [2] Cassano A., Figoli A., Tagarelli A., Sindona G., Drioli E. “Integrated membrane process for the production of highly nutritional kiwifruit juice”, Desalination, 189: 21–30, (2006).
  • [3] Latocha P., Krupa T., Wolosiak R., Worobiej E., “Antioxidant activity and chemical difference in fruit of different Actinidia sp”, International Journal of Food Science and Nutrition, 61(4): 381–394, (2010).
  • [4] Dias M., Caleja C., Pereira C., Calhelda R.C., Kostic M., Sokovic M., Tavares D., Baraldi I. J., Barros L., Ferreira I. C. F. R., “Chemical composition and bioactive properties of byproducts from two different kiwi varieties”, Food Research International, 127: 108753, (2020).
  • [5] Özdemir M.B., Aktaş M., Şevik S., Khanlari A., “Modeling of a convective-infrared kiwifruit drying process”, International journal of Hydrogen Energy, 42: 18005–18013, (2017).
  • [6] Ercisli S., Esitken A., Cangi R., Sahin F., Adventitious root formation of kiwifruit in relation to sampling date, IBA and Agrobacterium rubi inoculation, Plant Growth Regulation, 41: 133–137, (2003).
  • [7] Tavarini S., Degl’lnnocenti E., Remorini D., Massai R., Guidi L., Antioxidant capacity, ascorbic acid, total phenols and carotenoids during harvest and after storage of Hayward kiwifruit, Food Chemistry, 107: 282–288, (2008).
  • [8] Simal S., Femenia A., Carcel J. A., Rosello C., Mathematical modelling of the drying curves of kiwi fruits: influence of the ripening stage, Journal of the Science of Food and Agriculture, 85: 425–432, (2005).
  • [9] Beirao-da C.S., Steiner A., Correia L., Leitao E., Empis J., Moldao M. M., Influence of moderate heat treatments on physical and chemical characteristics of kiwifruits slices, European Food Research and Technology, 226: 641–651, (2008).
  • [10] Kunzek H., Müller S., Vetter S., Godeck R., The significance of physicochemical properties of plant cell wall materials for the development of innovative food products, European Food Research and Technology, 214: 361–376, (2002).
  • [11] Goula A.M. and Adamopoulos K.G., Retention of ascorbic acid during drying of tomato halves and tomato pulp, Drying Technology, 24: 57–64, (2006).
  • [12] Uddin M.S., Hawlader M., Zhou L., Kinetics of ascorbic acid degradation in dried kiwifruits during storage, Drying Technology, 19(2): 437–446, (2001).
  • [13] Orikasa T., Wu L., Shiina T., Tagawa A., Drying characteristics of kiwifruit during hot air drying, Journal of Food Engineering, 85: 303–308, (2008).
  • [14] Femenia A., Sastre-Serrano G., Simal S., Garau M.C., Eim V.S., Rosello C., Effects of air-drying temperature on the cell walls of kiwifruit processed at different stages of ripening, LWT, Food Science and Technology, 42: 106–112, (2009).
  • [15] Zhou X., Ramaswamy H., Qu Y., Xu R., Wang S., Combined radio frequency-vacuum and hot air drying of kiwifruits: Effect on drying uniformity, energy efficiency and product quality, Innovative Food Science and Emerging Technologies, 56: 102182, (2019).
  • [16] Simal S., Femenia A., Garau M.C., Rossello C., Use of exponential, Page’s and diffusional models to simulate the drying kinetics of kiwi fruit, Journal of Food Engineering, 66: 323–328, (2005).
  • [18] Maskan M., Drying, shrinkage and rehydration characteristics of kiwifruits during hot air and microwave drying, Journal of Food Engineering, 48: 177–182, (2001).
  • [19] Variyenli H.I., Güneş enerjisi destekli düz ve hapsedici yüzeyli kurutma fırınlarının performanslarının kivi kurutarak karşılaştırılması, Politeknik Dergisi, 21: 3, 723-729, (2018).
  • [20] Kaya A., Aydın O., Dincer I., Experimental and numerical investigation of heat and mass transfer during drying of Hayward kiwi fruits (Actinidia Deliciosa Planch), Journal of Food Engineering, 88: 323–330, (2008).
  • [21] Sadıkoglu H., Liapis A., Crosser O., Optimal control of the primary and secondary drying stages of bulk solution freeze drying in trays, Drying Technology, 16: 399-431, (2007).
  • [22] Acar B., Sadikoglu H., Doymaz I., Freeze-Drying Kinetics And Diffusion Modeling Of Saffron (Crocus Satıvus L.), Journal of Food Processing and Preservation, 39: 142–149, (2015).
  • [23] Menges H.O. and Ertekin C., Mathematical modeling of thin layer drying of Golden apples, Journal of Food Engineering, 77: 119-125, (2006).
  • [24] Gálvez A.V., Aranda M., Sainz C.B., Uribe E., Empirical modeling of drying process for apple (Cv. Granny Smith) slices at different air temperatures, Journal of Food Processing Preservation, 32: 972–986, (2008).
  • [25] Rayaguru K., Routray W., Mathematical modelling and quality parameters of air-dried betel leaf (Piper betle L.), Journal of Food Processing Preservation, 35: 394–401, (2011).
  • [26] Zogzas N.P., Maraulis Z.B., Marinos-Kouirs D., Moisture diffusivity data compilation in foodstuffs, Drying Technology, 14, 2225–2253, (1996).
There are 25 citations in total.

Details

Primary Language English
Subjects Engineering
Journal Section Research Article
Authors

Bahadir Acar 0000-0002-9494-6301

Abdullah Dağdeviren 0000-0002-5418-4445

Prof. Dr. Mehmet Özkaymak 0000-0002-4575-8988

Abdillahi Robleh Guinaleh This is me 0000-0001-6770-9565

Publication Date March 27, 2023
Submission Date September 17, 2020
Published in Issue Year 2023 Volume: 26 Issue: 1

Cite

APA Acar, B., Dağdeviren, A., Özkaymak, P. D. M., Guinaleh, A. R. (2023). Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process. Politeknik Dergisi, 26(1), 415-423. https://doi.org/10.2339/politeknik.796237
AMA Acar B, Dağdeviren A, Özkaymak PDM, Guinaleh AR. Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process. Politeknik Dergisi. March 2023;26(1):415-423. doi:10.2339/politeknik.796237
Chicago Acar, Bahadir, Abdullah Dağdeviren, Prof. Dr. Mehmet Özkaymak, and Abdillahi Robleh Guinaleh. “Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process”. Politeknik Dergisi 26, no. 1 (March 2023): 415-23. https://doi.org/10.2339/politeknik.796237.
EndNote Acar B, Dağdeviren A, Özkaymak PDM, Guinaleh AR (March 1, 2023) Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process. Politeknik Dergisi 26 1 415–423.
IEEE B. Acar, A. Dağdeviren, P. D. M. Özkaymak, and A. R. Guinaleh, “Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process”, Politeknik Dergisi, vol. 26, no. 1, pp. 415–423, 2023, doi: 10.2339/politeknik.796237.
ISNAD Acar, Bahadir et al. “Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process”. Politeknik Dergisi 26/1 (March 2023), 415-423. https://doi.org/10.2339/politeknik.796237.
JAMA Acar B, Dağdeviren A, Özkaymak PDM, Guinaleh AR. Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process. Politeknik Dergisi. 2023;26:415–423.
MLA Acar, Bahadir et al. “Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process”. Politeknik Dergisi, vol. 26, no. 1, 2023, pp. 415-23, doi:10.2339/politeknik.796237.
Vancouver Acar B, Dağdeviren A, Özkaymak PDM, Guinaleh AR. Freeze Drying Process of Kiwi Slices With Various Thicknesses And Investigation Drying Characteristic of Process. Politeknik Dergisi. 2023;26(1):415-23.

Cited By

Study on fresh processing key technology and quality influence of Cut Ophiopogonis Radix based on multi-index evaluation
Open Life Sciences
https://doi.org/10.1515/biol-2022-0638

 download This work is licensed under Creative Commons Attribution-ShareAlike 4.0 International.