Yıl 2017, Cilt 20, Sayı 2, Sayfalar 81 - 88 2017-08-25

Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites

İlkay ATAR [1] , Kadir KARAKUŞ [2] , İbrahim Halil BAŞBOĞA [3] , Fatma BOZKURT [4] , Fatih MENGELOĞLU [5]

99 300

Recycling is vital subject for sustainable future and environment. Plastic waste can be post-consumer and pre-consumer and need urgent recycling. Both PVC and Polyethylene terephthalate (PET) were used commonly and has important place in solid waste stream. These polymers should be reused or recycled instead of landfilling due to their valuable properties. In this study, potential utilization of PET flour in recycled PVC composites was investigated using 2-level factorial design.  Processing type (injection molding vs compression molding) and PET filling concentration (0% and 10%) during recycled PVC composite materials manufacturing were studied. During manufacturing process, 20 phr (per-hundred-resin) DOP was utilized. Density, tensile, flexural, impact and hardness (shore D) properties of composites were determined. Results showed that samples produced with injection molding process provided superior tensile properties compared to compression molding process ones. Addition of PET flour into recycled PVC matrix both reduced the tensile strength and elongation at break values while improving tensile modulus. In the case of flexural properties, compression molding and injection molding provided higher flexural strength and flexural modulus, respectively. Impact strength was reduced with injection molding and PET presence in the matrix. Processing type did not affect the hardness of the materials. However, addition of PET in the PVC matrix increased the hardness of the samples. Future studies will be conducted to investigate the effect of using different size and shape PET fibers in recycled PVC.

Recycled PVC, Polyethylene terephthalate (PET), injection molding, compression molding
  • Anonim (2007), Standard Test Method for Density and Specific Gravity (Relative Density) of Plastics by Displacement, ASTM D 792, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia.
  • Anonim (2003), Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM D 790, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia.
  • Anonim (2001), Standard Test Method for Tensile Properties of Plastics, ASTM D 638, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia.
  • Anonim (2000). Standard Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials, ASTM D 256, Annual Book of American Society for Testing and Materials (ASTM) Standards, Philadelphia.
  • Fukushima, M., Wu, B., Ibe, H., Wakai,K., Sugiyama, E., Abe, H., Kitagawa, K., Tsuruga, S., Shimura, K., Ono, E., (2010). Study on dechlorination technology for municipal waste plastics containing polyvinyl chloride and polyethylene terephthalate, J Mater Cycles Waste Manag, 12:108–122.
  • Jong-Pil Won, J-P., Jang, C., Lee, S-W., Lee, S-J., Kim, H-Y.,(2010). Construction and Building Materials, Construction and Building Materials 24 660–665
  • Kıralp, S., Özkoç G., Erdoğan, S., Çamurlu, P., Doğan, M., Baydemir, T., (2007). Modern Çağın Malzemesi Plastikler, ODTÜ Bilim ve Toplum Kitapları Dizisi ODTÜ Yayıncılık.
  • Makkam, S.AND Harnnarongchai, W., (2014).Rheological and Mechanical Properties of Recycled PET Modified by Reactive Extrusion, ENERGY PROCEDIA 56 547 – 553.
  • Mengeloglu, F., Karakus, K., (2008) ʺ Polymer-Composites from Recycled High Density Polyethylene and Waste Lignocellulosic Materialsʺ, Fresenius Environmental Bulletin, Vol.17-No 2.
  • Santos, R. P. O., Rodrigues, B. V. M., Ramires, E. C., Ruvolo-Filho, A. C.,Frollini, E., (2015).  Bio-based materials from the electrospinning of lignocellulosic sisal fibers and recycled PET, Industrial Crops and Products 72 69–76.
  • X Colom, J Can˜avate, F Carrillo and MJ Lis., (2014) ʺ Acoustic and mechanical properties of recycled polyvinyl chloride/ground tyre rubber compositesʺ, Journal of Composite Materials, Vol. 48(9) 1061–1069.
Konular Çevre Mühendisliği
Dergi Bölümü Araştırma Makalesi
Yazarlar

Yazar: İlkay ATAR
Kurum: KAHRAMANMARAŞ SÜTÇÜ İMAM ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Kadir KARAKUŞ

Yazar: İbrahim Halil BAŞBOĞA

Yazar: Fatma BOZKURT

Yazar: Fatih MENGELOĞLU

Bibtex @araştırma makalesi { ksujes302246, journal = {Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi}, issn = {}, eissn = {1309-1751}, address = {Kahramanmaraş Sütçü İmam Üniversitesi}, year = {2017}, volume = {20}, pages = {81 - 88}, doi = {10.17780/ksujes.302246}, title = {Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites}, key = {cite}, author = {ATAR, İlkay and BAŞBOĞA, İbrahim Halil and KARAKUŞ, Kadir and BOZKURT, Fatma and MENGELOĞLU, Fatih} }
APA ATAR, İ , KARAKUŞ, K , BAŞBOĞA, İ , BOZKURT, F , MENGELOĞLU, F . (2017). Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 20 (2), 81-88. DOI: 10.17780/ksujes.302246
MLA ATAR, İ , KARAKUŞ, K , BAŞBOĞA, İ , BOZKURT, F , MENGELOĞLU, F . "Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites". Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 20 (2017): 81-88 <http://jes.ksu.edu.tr/issue/30940/302246>
Chicago ATAR, İ , KARAKUŞ, K , BAŞBOĞA, İ , BOZKURT, F , MENGELOĞLU, F . "Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites". Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 20 (2017): 81-88
RIS TY - JOUR T1 - Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites AU - İlkay ATAR , Kadir KARAKUŞ , İbrahim Halil BAŞBOĞA , Fatma BOZKURT , Fatih MENGELOĞLU Y1 - 2017 PY - 2017 N1 - doi: 10.17780/ksujes.302246 DO - 10.17780/ksujes.302246 T2 - Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi JF - Journal JO - JOR SP - 81 EP - 88 VL - 20 IS - 2 SN - -1309-1751 M3 - doi: 10.17780/ksujes.302246 UR - http://dx.doi.org/10.17780/ksujes.302246 Y2 - 2017 ER -
EndNote %0 Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites %A İlkay ATAR , Kadir KARAKUŞ , İbrahim Halil BAŞBOĞA , Fatma BOZKURT , Fatih MENGELOĞLU %T Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites %D 2017 %J Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi %P -1309-1751 %V 20 %N 2 %R doi: 10.17780/ksujes.302246 %U 10.17780/ksujes.302246
ISNAD ATAR, İlkay , KARAKUŞ, Kadir , BAŞBOĞA, İbrahim Halil , BOZKURT, Fatma , MENGELOĞLU, Fatih . "Utilization of Recycled PET Flours in Recycled Polyvinyl Chloride (PVC) Composites". Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 20 / 2 (Ağustos 2017): 81-88. http://dx.doi.org/10.17780/ksujes.302246