Araştırma Makalesi
BibTex RIS Kaynak Göster

Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites

Yıl 2023, Cilt: 23 Sayı: 1, 260 - 269, 01.03.2023

Çağrı Uzay

https://doi.org/10.35414/akufemubid.1106626

Öz

Wear behaviors of silane coated silica (SiO2) nanoparticle-filled glass fiber reinforced polymer composites were investigated depending on the type of silane coating (KH550: -Aminopropyl-triethoxy-silane and KH570: -Methacryloxypropyl-trimethoxy-silane) and nanoparticle percentages within the polymer matrix. Unlike the cases given in most research studies, the silanized silica nanoparticles were used as received. Therefore, the synergistic effects of silanization and nanoparticle reinforcement were successfully applied since the silanization process was eliminated. The matrix modification with the nanoparticles was carried out using an ultrasound homogenizer, and then the modified matrix was reinforced with glass fibers. Scanned electron microscopy revealed the disperse ability of silanized silica nanoparticles within the glass/epoxy composites. The wear behaviors of the developed composites were investigated via a ball-on-disc tribology device. Wear track profiles were obtained depending on the width and depth of the wear. The length of wear track and wear mechanisms were determined by a stereomicroscope. The findings have shown that both types of silane coating and silica nanofiller percentages significantly affected the wear rate of the composite structures.

Anahtar Kelimeler

Glass fiber Nano silica Silane coating agents Wear test Wear mechanisms

Destekleyen Kurum

Kahramanmaraş Sütçü İmam Üniversitesi

Proje Numarası

2020/9-32 M

Teşekkür

This study has been supported by Kahramanmaraş Sütçü İmam University, Scientific Research Projects Coordination Unit, under a grant number of 2020/9-32 M.

Kaynakça

  • Aguilera-Camacho, L. D., Hernández-Sierra, M. T., García-Miranda, J. S., and Moreno, K. J., 2021. On the Influence of Tribological Properties of AISI 4140 Annealed Steel against Ceramic Counterparts under Dry and Lubricated Conditions and Their Effect on Steel Microstructure. Metals, 11(8), 1275.
  • Allahverdi, A., Ehsani, M., Janpour, H., and Ahmadi, S., 2012. The effect of nanosilica on mechanical, thermal and morphological properties of epoxy coating. Progress in Organic Coatings, 75(4), 543-548.
  • Bertasius, P., Meisak, D., Macutkevic, J., Kuzhir, P., Selskis, A., Volnyanko, E., and Banys, J., 2019. Fine Tuning of Electrical Transport and Dielectric Properties of Epoxy/Carbon Nanotubes Composites via Magnesium Oxide Additives. Polymers, 11(12).
  • Deng, S., Zhang, J., Ye, L., and Wu, J., 2008. Toughening epoxies with halloysite nanotubes. Polymer, 49(23), 5119-5127.
  • Elango, N., and Faudzi, A. A. M., 2015. A review article: investigations on soft materials for soft robot manipulations. International Journal of Advanced Manufacturing Technology, 80(5-8), 1027-1037.
  • Geren, N., Acer, D. C., Uzay, C., and Bayramoglu, M., 2021. The effect of boron carbide additive on the low-velocity impact properties of low-density foam core composite sandwich structures. Polymer Composites, 42(4), 2037-2049.
  • Guo, Y., Zhang, Z., Cao, Z., and Wang, D., 2019. Wear behavior of hollow glass beads (HGB) reinforced nitrile butadiene rubber: Effects of silane coupling agent and filler content. Materials Today Communications, 19, 366-373.
  • Jia, Z., Feng, X., and Zou, Y., 2018. An investigation on mode II fracture toughness enhancement of epoxy adhesive using graphene nanoplatelets. Composites Part B: Engineering, 155, 452-456.
  • Kausar, A., 2020. Thermally conducting polymer/nanocarbon and polymer/inorganic nanoparticle nanocomposite: a review. Polymer-Plastics Technology and Materials, 59(8), 895-909.
  • Kuzmin, K. L., Timoshkin, I. A., Gutnikov, S. I., Zhukovskaya, E. S., Lipatov, Y. V., and Lazoryak, B. I., 2016. Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites. Composite Interfaces, 24(1), 13-34.
  • Kwon, D. J., Shin, P. S., Kim, J. H., Baek, Y. M., Park, H. S., DeVries, K. L., & Park, J. M., 2017. Interfacial properties and thermal aging of glass fiber/epoxy composites reinforced with SiC and SiO2 nanoparticles. Composites Part B-Engineering, 130, 46-53.
  • Lazar, P. J. L., Sengottuvelu, R., and Natarajan, E., 2018. Assessments of Secondary Reinforcement of Epoxy Matrix-Glass Fibre Composite Laminates through Nanosilica (SiO2). Materials, 11(11).
  • Liang, M., and Wong, K. L., 2017. Study of Mechanical and Thermal Performances of Epoxy Resin Filled with Micro Particles and Nanoparticles. Energy Procedia, 110, 156-161.
  • Megahed, M., Megahed, A. A., and Agwa, M. A., 2019. The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy. Journal of Industrial Textiles, 49(2), 181-199.
  • Mohanty, A., and Srivastava, V. K., 2015. Effect of alumina nanoparticles on the enhancement of impact and flexural properties of the short glass/carbon fiber reinforced epoxy based composites. Fibers and Polymers, 16(1), 188-195.
  • Muralidhara, B., Babu, S. P. K., and Suresha, B., 2020. Studies on mechanical, thermal and tribological properties of carbon fibre-reinforced boron nitride-filled epoxy composites. High Performance Polymers, 32(9), 1061-1081.
  • Ozsoy, I., Mimaroglu, A., and Unal, H., 2017. Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites. Science and Engineering of Composite Materials, 24(4), 485-494.
  • Panin, S., Qitao, H., Kornienko, L., Alexenko, V., and Buslovich, D., 2019. Efficiency of glass fibers functionalization with different silane-containing modifiers for improving mechanical and tribotechnical properties of ultra-high-molecular weight polyethylene composites. AIP Conference Proceedings, 2141, 040006.
  • Panin, S. V., Qitao, H., Kornienko, L. A., Buslovich, D. G., and Alexenko, V. O., 2019. Effect of type and size of KH550 modified filler on mechanical and tribotechnical properties of UHMWPE composites. AIP Conference Proceedings, 2167(1), 020268.
  • Panse, P., Anand, A., Murkute, V., Ecka, A., Harshe, R., and Joshi, M., 2016. Mechanical properties of hybrid structural composites reinforced with nanosilica. Polymer Composites, 37(4), 1216-1222.
  • Pun, A. K., Siddhartha, and Singh, A. K., 2019. Thermo-mechanical and Erosion Wear Peculiarity of Hybrid Composites Filled with Micro and Nano Silicon Dioxide Fillers - A Comparative Study. Silicon, 11(4), 1885-1901.
  • Rubab, Z., Afzal, A., Siddiqi, H. M., and Saeed, S., 2014. Preparation, Characterization, and Enhanced Thermal and Mechanical Properties of Epoxy-Titania Composites. The Scientific World Journal, 515739.
  • Saberian, M. H., Ghasemi, F. A., Ghasemi, I., and Bagheri, M. S., 2019. Morphology, mechanical behavior, and prediction of A-glass/SiO2/epoxy nanocomposite using response surface methodology. Journal of Elastomers and Plastics, 51(7-8), 669-683.
  • Sharma, H., Misra, J. P., and Singh, I., 2020. Friction and wear behaviour of epoxy composites reinforced with food waste fillers. Composites Communications, 22, 100436.
  • Shokrieh, M. M., Ghoreishi, S. M., and Esmkhani, M., 2015. 11 - Toughening mechanisms of nanoparticle-reinforced polymers. In Q. Qin and J. Ye (Eds.), Toughening Mechanisms in Composite Materials (pp. 295-320): Woodhead Publishing.
  • Tang, L.-C., Wan, Y.-J., Peng, K., Pei, Y.-B., Wu, L.-B., Chen, L.-M., Su, L.-J., Jiang, J.-X., Lai, G.-Q., 2013. Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles. Composites Part A: Applied Science and Manufacturing, 45, 95-101.
  • Ulus, H., Ustun, T., Şahin, O., Karabulut, S., Eskizeybek, V., and Avcı, A., 2016. Low-velocity impact behavior of carbon fiber/epoxy multiscale hybrid nanocomposites reinforced with multiwalled carbon nanotubes and boron nitride nanoplates. Journal of Composite Materials, 50.
  • Wang, L. H., Tang, C., Wang, X. B., and Zheng, W., 2019. Molecular dynamics simulation on the thermodynamic properties of insulating paper cellulose modified by silane coupling agent grafted nano-SiO2. AIP Advances, 9(12).
  • Wang, S., Liu, Y., Chen, K., Xue, P., Lin, X., and Jia, M., 2020. Thermal and mechanical properties of the continuous glass fibers reinforced PVC composites prepared by the wet powder impregnation technology. Journal of Polymer Research, 27(4), 82.
  • Wu, Z. J., Wang, M., and Wang, Z., 2015. The gas phase SiO2/epoxy nanocomposites with enhanced mechanical and thermal properties. High Performance Polymers, 27(4), 469-475.
  • Yildirim, F., Aydin, M., and Avci, A., 2017. Mechanical properties of nano-SiO2 reinforced 3D glass fiber/epoxy composites. International Journal of Materials Research, 108(4), 308-321.
  • Zhang, Z. X., Zhou, H. B., Li, W. T., and Tang, C., 2021. Molecular Simulation of Improved Mechanical Properties and Thermal Stability of Insulation Paper Cellulose by Modification with Silane-Coupling-Agent-Grafted Nano-SiO2. Processes, 9(5).
  • Zhao, W. C., Zhao, W. J., Huang, Z. P., Liu, G., and Wu, B., 2019. Tribological performances of epoxy resin composite coatings using hexagonal boron nitride and cubic boron nitride nanoparticles as additives. Chemical Physics Letters, 732.
  • Zheng, X. R., and Park, C. W., 2019. Thermal and mechanical properties of carbon fiber-reinforced resin composites with copper/boron nitride coating. Composite Structures, 220, 494-501.

Silan Kaplı Silika Dolgulu Cam/Epoksi Nanokompozitlerin Aşınma Davranışlarının Araştırılması

Yıl 2023, Cilt: 23 Sayı: 1, 260 - 269, 01.03.2023

Çağrı Uzay

https://doi.org/10.35414/akufemubid.1106626

Öz

Silan kaplı silika (SiO2) nanoparçacık dolgulu cam elyaf takviyeli polimer kompozitlerin aşınma davranışları, silan kaplama tipine (KH550: -Aminopropyl-triethoxy-silan, KH570: -Methacryloxypropyl-trimethoxy-silan) ve polimer matrisi içindeki nanoparçacık yüzdelerine bağlı olarak incelenmiştir. Birçok araştırma çalışmasından farklı olarak, silanize silika nanoparçacıklar hazır bir şekilde kullanıldı. Bu nedenle silanizasyon işlemi ortadan kaldırıldığı için silanizasyon ve nanoparçacık takviyesinin sinerjistik etkileri başarıyla uygulandı. Nanopartiküller ile matris modifikasyonu, ultrasonik homojenleştirici kullanılarak gerçekleştirildi ve ardından modifiye edilmiş matris, cam elyaflarla güçlendirildi. Taramalı elektron mikroskobu, cam/epoksi kompozitler içinde silanize silika nanoparçacıkların dağılabilirliğini göstermiştir. Geliştirilen kompozitlerin aşınma davranışları bir triboloji cihazı ile incelenmiştir. Aşınmanın genişliğine ve derinliğine bağlı olarak aşınma izi profilleri elde edilmiştir. Aşınma izinin uzunluğu ve aşınma mekanizmaları bir stereomikroskop ile belirlendi. Bulgular, her iki silan kaplama tipinin ve silika nanodolgu yüzdelerinin kompozit yapıların aşınma durumunu önemli ölçüde etkilediğini göstermiştir.

Anahtar Kelimeler

cam elyaf nano silika Silan kaplama ajanı aşınma testi Aşınma mekanizmaları

Proje Numarası

2020/9-32 M

Kaynakça

  • Aguilera-Camacho, L. D., Hernández-Sierra, M. T., García-Miranda, J. S., and Moreno, K. J., 2021. On the Influence of Tribological Properties of AISI 4140 Annealed Steel against Ceramic Counterparts under Dry and Lubricated Conditions and Their Effect on Steel Microstructure. Metals, 11(8), 1275.
  • Allahverdi, A., Ehsani, M., Janpour, H., and Ahmadi, S., 2012. The effect of nanosilica on mechanical, thermal and morphological properties of epoxy coating. Progress in Organic Coatings, 75(4), 543-548.
  • Bertasius, P., Meisak, D., Macutkevic, J., Kuzhir, P., Selskis, A., Volnyanko, E., and Banys, J., 2019. Fine Tuning of Electrical Transport and Dielectric Properties of Epoxy/Carbon Nanotubes Composites via Magnesium Oxide Additives. Polymers, 11(12).
  • Deng, S., Zhang, J., Ye, L., and Wu, J., 2008. Toughening epoxies with halloysite nanotubes. Polymer, 49(23), 5119-5127.
  • Elango, N., and Faudzi, A. A. M., 2015. A review article: investigations on soft materials for soft robot manipulations. International Journal of Advanced Manufacturing Technology, 80(5-8), 1027-1037.
  • Geren, N., Acer, D. C., Uzay, C., and Bayramoglu, M., 2021. The effect of boron carbide additive on the low-velocity impact properties of low-density foam core composite sandwich structures. Polymer Composites, 42(4), 2037-2049.
  • Guo, Y., Zhang, Z., Cao, Z., and Wang, D., 2019. Wear behavior of hollow glass beads (HGB) reinforced nitrile butadiene rubber: Effects of silane coupling agent and filler content. Materials Today Communications, 19, 366-373.
  • Jia, Z., Feng, X., and Zou, Y., 2018. An investigation on mode II fracture toughness enhancement of epoxy adhesive using graphene nanoplatelets. Composites Part B: Engineering, 155, 452-456.
  • Kausar, A., 2020. Thermally conducting polymer/nanocarbon and polymer/inorganic nanoparticle nanocomposite: a review. Polymer-Plastics Technology and Materials, 59(8), 895-909.
  • Kuzmin, K. L., Timoshkin, I. A., Gutnikov, S. I., Zhukovskaya, E. S., Lipatov, Y. V., and Lazoryak, B. I., 2016. Effect of silane/nano-silica on the mechanical properties of basalt fiber reinforced epoxy composites. Composite Interfaces, 24(1), 13-34.
  • Kwon, D. J., Shin, P. S., Kim, J. H., Baek, Y. M., Park, H. S., DeVries, K. L., & Park, J. M., 2017. Interfacial properties and thermal aging of glass fiber/epoxy composites reinforced with SiC and SiO2 nanoparticles. Composites Part B-Engineering, 130, 46-53.
  • Lazar, P. J. L., Sengottuvelu, R., and Natarajan, E., 2018. Assessments of Secondary Reinforcement of Epoxy Matrix-Glass Fibre Composite Laminates through Nanosilica (SiO2). Materials, 11(11).
  • Liang, M., and Wong, K. L., 2017. Study of Mechanical and Thermal Performances of Epoxy Resin Filled with Micro Particles and Nanoparticles. Energy Procedia, 110, 156-161.
  • Megahed, M., Megahed, A. A., and Agwa, M. A., 2019. The influence of incorporation of silica and carbon nanoparticles on the mechanical properties of hybrid glass fiber reinforced epoxy. Journal of Industrial Textiles, 49(2), 181-199.
  • Mohanty, A., and Srivastava, V. K., 2015. Effect of alumina nanoparticles on the enhancement of impact and flexural properties of the short glass/carbon fiber reinforced epoxy based composites. Fibers and Polymers, 16(1), 188-195.
  • Muralidhara, B., Babu, S. P. K., and Suresha, B., 2020. Studies on mechanical, thermal and tribological properties of carbon fibre-reinforced boron nitride-filled epoxy composites. High Performance Polymers, 32(9), 1061-1081.
  • Ozsoy, I., Mimaroglu, A., and Unal, H., 2017. Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites. Science and Engineering of Composite Materials, 24(4), 485-494.
  • Panin, S., Qitao, H., Kornienko, L., Alexenko, V., and Buslovich, D., 2019. Efficiency of glass fibers functionalization with different silane-containing modifiers for improving mechanical and tribotechnical properties of ultra-high-molecular weight polyethylene composites. AIP Conference Proceedings, 2141, 040006.
  • Panin, S. V., Qitao, H., Kornienko, L. A., Buslovich, D. G., and Alexenko, V. O., 2019. Effect of type and size of KH550 modified filler on mechanical and tribotechnical properties of UHMWPE composites. AIP Conference Proceedings, 2167(1), 020268.
  • Panse, P., Anand, A., Murkute, V., Ecka, A., Harshe, R., and Joshi, M., 2016. Mechanical properties of hybrid structural composites reinforced with nanosilica. Polymer Composites, 37(4), 1216-1222.
  • Pun, A. K., Siddhartha, and Singh, A. K., 2019. Thermo-mechanical and Erosion Wear Peculiarity of Hybrid Composites Filled with Micro and Nano Silicon Dioxide Fillers - A Comparative Study. Silicon, 11(4), 1885-1901.
  • Rubab, Z., Afzal, A., Siddiqi, H. M., and Saeed, S., 2014. Preparation, Characterization, and Enhanced Thermal and Mechanical Properties of Epoxy-Titania Composites. The Scientific World Journal, 515739.
  • Saberian, M. H., Ghasemi, F. A., Ghasemi, I., and Bagheri, M. S., 2019. Morphology, mechanical behavior, and prediction of A-glass/SiO2/epoxy nanocomposite using response surface methodology. Journal of Elastomers and Plastics, 51(7-8), 669-683.
  • Sharma, H., Misra, J. P., and Singh, I., 2020. Friction and wear behaviour of epoxy composites reinforced with food waste fillers. Composites Communications, 22, 100436.
  • Shokrieh, M. M., Ghoreishi, S. M., and Esmkhani, M., 2015. 11 - Toughening mechanisms of nanoparticle-reinforced polymers. In Q. Qin and J. Ye (Eds.), Toughening Mechanisms in Composite Materials (pp. 295-320): Woodhead Publishing.
  • Tang, L.-C., Wan, Y.-J., Peng, K., Pei, Y.-B., Wu, L.-B., Chen, L.-M., Su, L.-J., Jiang, J.-X., Lai, G.-Q., 2013. Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles. Composites Part A: Applied Science and Manufacturing, 45, 95-101.
  • Ulus, H., Ustun, T., Şahin, O., Karabulut, S., Eskizeybek, V., and Avcı, A., 2016. Low-velocity impact behavior of carbon fiber/epoxy multiscale hybrid nanocomposites reinforced with multiwalled carbon nanotubes and boron nitride nanoplates. Journal of Composite Materials, 50.
  • Wang, L. H., Tang, C., Wang, X. B., and Zheng, W., 2019. Molecular dynamics simulation on the thermodynamic properties of insulating paper cellulose modified by silane coupling agent grafted nano-SiO2. AIP Advances, 9(12).
  • Wang, S., Liu, Y., Chen, K., Xue, P., Lin, X., and Jia, M., 2020. Thermal and mechanical properties of the continuous glass fibers reinforced PVC composites prepared by the wet powder impregnation technology. Journal of Polymer Research, 27(4), 82.
  • Wu, Z. J., Wang, M., and Wang, Z., 2015. The gas phase SiO2/epoxy nanocomposites with enhanced mechanical and thermal properties. High Performance Polymers, 27(4), 469-475.
  • Yildirim, F., Aydin, M., and Avci, A., 2017. Mechanical properties of nano-SiO2 reinforced 3D glass fiber/epoxy composites. International Journal of Materials Research, 108(4), 308-321.
  • Zhang, Z. X., Zhou, H. B., Li, W. T., and Tang, C., 2021. Molecular Simulation of Improved Mechanical Properties and Thermal Stability of Insulation Paper Cellulose by Modification with Silane-Coupling-Agent-Grafted Nano-SiO2. Processes, 9(5).
  • Zhao, W. C., Zhao, W. J., Huang, Z. P., Liu, G., and Wu, B., 2019. Tribological performances of epoxy resin composite coatings using hexagonal boron nitride and cubic boron nitride nanoparticles as additives. Chemical Physics Letters, 732.
  • Zheng, X. R., and Park, C. W., 2019. Thermal and mechanical properties of carbon fiber-reinforced resin composites with copper/boron nitride coating. Composite Structures, 220, 494-501.
Toplam 34 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Makine Mühendisliği
Bölüm Makaleler
Yazarlar

Çağrı Uzay 0000-0002-7713-8951

Proje Numarası 2020/9-32 M
Erken Görünüm Tarihi 1 Mart 2023
Yayımlanma Tarihi 1 Mart 2023
Gönderilme Tarihi 20 Nisan 2022
Yayımlandığı Sayı Yıl 2023 Cilt: 23 Sayı: 1

Kaynak Göster

APA Uzay, Ç. (2023). Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, 23(1), 260-269. https://doi.org/10.35414/akufemubid.1106626
AMA Uzay Ç. Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. Mart 2023;23(1):260-269. doi:10.35414/akufemubid.1106626
Chicago Uzay, Çağrı. “Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 23, sy. 1 (Mart 2023): 260-69. https://doi.org/10.35414/akufemubid.1106626.
EndNote Uzay Ç (01 Mart 2023) Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 23 1 260–269.
IEEE Ç. Uzay, “Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites”, Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, c. 23, sy. 1, ss. 260–269, 2023, doi: 10.35414/akufemubid.1106626.
ISNAD Uzay, Çağrı. “Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi 23/1 (Mart 2023), 260-269. https://doi.org/10.35414/akufemubid.1106626.
JAMA Uzay Ç. Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2023;23:260–269.
MLA Uzay, Çağrı. “Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites”. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi, c. 23, sy. 1, 2023, ss. 260-9, doi:10.35414/akufemubid.1106626.
Vancouver Uzay Ç. Investigating the Wear Behaviors of Silane Coated Silica Filled Glass/Epoxy Nanocomposites. Afyon Kocatepe Üniversitesi Fen Ve Mühendislik Bilimleri Dergisi. 2023;23(1):260-9.
 Kapak Resmi İndir