Araştırma Makalesi
BibTex RIS Kaynak Göster

Experimental Analysis and Finite Element Modeling of S-Core Sandwich Panel Composites Drop Impact Response

Yıl 2024, Cilt: 15 Sayı: 1, 131 - 139

Hasan Murat Öztemiz Şemsettin Temiz

https://doi.org/10.24012/dumf.1365978

Öz

Sandwich panel composites have several applications in material technology. The sandwich panel composite material is constructed of stainless steel-316 for the top and bottom plates, aluminum 1050A-0 for the core, and DP-8405 acrylic adhesive for the binding element. The impact behavior of S-core composite sandwich panels was examined using low-velocity drop impact tests and finite element models. Finite element models have been created to characterize the influence of composite element bending behavior on variations. The specific flexural modulus and strength of composite S-core sandwich structures are equivalent to those found in the literature for core structures. As a result, the minimum weight design served as a guideline for producing weight and density-efficient hybrid composite sandwich panels. The energy absorbed in the test findings rose between 15.15% and 30% as the core thickness grew and between 3.571% and 41.34% as the core arrays changed. Impact load-bearing capability increases with varied core heights and array designs.

Anahtar Kelimeler

Low-velocity drop impact test Sandwich panel composites Mechanical behavior S-core Finite element modeling

Proje Numarası

BAP Project Code: FDK-2020-2306

Teşekkür

This research was supported by Inonu University (BAP Project Code: FDK-2020-2306). The authors thank Inonu University for funding the project.

Kaynakça

  • [1] M.Ş. Adin, E. Kılıçkap, “Strength of double-reinforced adhesive joints, ” Materials Testing, Feb 23, 2021.DOI: 10.1515/mt-2020-0024
  • [2] H. Adin , B. Yıldız, M.Ş. Adin , “NUMERICAL INVESTIGATION OF FATIGUE BEHAVIOURS OF NONPATCHED AND PATCHED ALUMINIUM PIPES, ” European Journal of Technique (EJT), Volume: 11 Issue: 1, 60 – 65, 2021, DOI: 10.36222/ejt.893327
  • [3] M. Arslan , O. Güler, U. Alver, “ The investigation of the mechanical properties of sandwich panel composites with different surface and core materials’’. Pamukkale University Journal of Engineering Sciences, 24(6),1062-1068, 2018
  • [4] S. Chen, X. Tan, J. Hu, S. Zhu, B. Wang, L. Wang, Y. Jin, L. Wu, “A novel gradient negative stiffness honeycomb for recoverable energy absorption,” Composites Part B: Engineering ,Volume 2, 108745, 2021
  • [5] J. Cao, K. Cai, Q. Wang, J. Shi, “Damage behavior of a bonded sandwich beam with corrugated core under 3-point bending, Material Design Volume, ” 95, 165-172, 2016
  • [6] Y.Zhang, T. Liu, W. Tizani, “Experimental and numerical analysis of dynamic compressive response of Nomex honeycombs,” Composite Part B:Engineering, Volume 148, 27- 39, 2018
  • [7] X. Wu , H. Yu, L. Guo, L. Zhang, X. Sun, Z. Chai, “Experimental and numerical investigation of static and fatigue behaviors of composites honeycomb sandwich structure,” Composite Structure, 165-172, 2019
  • [8] G. Xu, F. Yang, T. Zeng, S. Cheng, Z. Wang, “Bending behavior of graded corrugated truss core composite sandwich beams,” Composite Structure, 342-251, 2016
  • [9] T. Li, L. Wang, “Bending behavior of sandwich composite structures with tunable 3D-printed core materials,” Composite Structure, 46-57, 2017
  • [10] F.C. Potes, J.M. Silva, P.V. Gamboa, “Development and characterization of a natural lightweight composite solution for aircraft structural applications,” Composite Structures, 430-440, 2016
  • [11] J. Forsberg, L. Nilsson, “Evaluation of response surface methodologies used in crashworthiness optimization,” International Journal of Impact Engineering, 759-777, 2006
  • [12] G. Qi, Y.L. Chen, P. Richert , L. Ma , K.U. Schröder, “A hybrid joining insert for sandwich panels with pyramidal lattice truss cores,” Composite Structures, 241, 112-123, 2020
  • [13] X. Lu, V.B.C Tan, T.E. Tay, “Auxeticity of monoclinic tetrachiral honeycombs,’’ Composite Structures, Volume 241, 112067
  • [14] K. Naresh, W.J. Cantwell, “Single and multi-layer core designs for Pseudo-Ductile failure in honeycomb sandwich structures,” Composite Structures, Volume 256, 113059, 2021
  • [15] S. Newstead, L. Watson, M. Cameron., “Vehicle Safety Ratings Estimated From Police Reported Crash Data: 2008 Update,” Monash University Accident Research Center Report, Melbourne, Australia, 280, 2008
  • [16] X.M. Xiang, G. Lu., Z.H. Wang, “Quasi-static bending behavior of sandwich beams with thin-walled tubes as core,” Int J Mech Sci, 55-62, 2015
  • [17] A. Petras, M.P.F. Sutcliffe, “Failure mode maps for honeycomb sandwich panels,” Composite Structure, 237-252, 1999
  • [18] Z. Sun, S. Shi, X. Hu, X. Guo, J. Chen, “Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal sub- strates with different surface morphology,” Composite Part B Engineering, 38-45, 2015
  • [19] H. Adin, M.Ş. Adin, “Effect of particles on tensile and bending properties of jute epoxy composites,” Materials Testing, March 16, 2022. DOI: 10.1515/mt-2021-2038
  • [20] H.B. Rachid, D. Noureddine, B. Benali, M.Ş. Adin, M.Ş., “Effect of nanocomposites rate on the crack propagation in the adhesive of single lap joint subjected to tension,” MECHANICS OF ADVANCED MATERIALS AND STRUCTURES; JUL 22 2023, DOI: 10.1080/15376494.2023.2240319
  • [21] S.D. Pan, L.Z.Wu, Y.G.Sun, Z.G.Zhaou, “Fracture test for double cantilever beam of honeycomb sandwich panels,” Materials Letters, 62, 523-526, 2008
  • [22] Q. Qin, S. Chen, K. Li, M. Jiang, T. Cui, J. Zhang, “Structural impact damage of metal honeycomb sandwich plates,” composite, Volume 252, 112719, 2020
  • [23] Q.H. Qin, T.J. Wang, “Low-velocity impact response of fully clamped metal foam core sandwich beam incorporating local denting effect,” Composite Structures,Volume 96, 346-356, 2013
  • [24] X. Zhang, F. Xu, Y. Zang, W. Feng, “Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact,” composite structure, Volume 236, 111882, 2020
  • [25] J. Xiong, L. Ma, L. Wu, B.Wang, and A.Vaziri, “Fabrication and crushing behavior of low-density carbon fiber composite pyramidal truss structures,” Composite Structures, Volume 92, 2695-2702, 2010
  • [26] H.P. Wang, C.T. Wu, Y. Guo, E. Mark, A. Botkin, “Coupled meshfree/finite element method for automotive crashworthiness simulations,” International Journal of Impact Engineering, 36(10- 11), 1210-1222
  • [27] J. Mei, J. Liu, W. Huang, “Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling,” Composite Structures, Volume 284, 11520, 2022
  • [28] V.S. Sokolinsky, H. Shen, “Vaikhanski L and Nutt SR., Experimental and analytical study of nonlinear bending response of sandwich beams,” Composite Structures, 60, 219-229, 2003
  • [29] A. Boukar , S. Corn , P. Slangen, P. Ieny, “Finite element modelling of low velocity impact test applied to biaxial glass fiber reinforced laminate composites,” International Journal of Impact Engineering 165,104218, 2022
  • [30] G. Belingardi, R. Vadori, “Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates,” International Journal of Impact Engineering 27, 213–229, 2002
  • [31] H. Yujia, M. Ming, Y. Siya, W. Kai, “Drop-weight impact behaviour of stitched composites: Influence of stitching pattern and stitching space,” Composites: Part A 172,107612, 2023
  • [32] D. Lee, B. Park, S. Park, C. Choi, J. Song, “Fabrication of high-stiffness fiber-metal laminates and study of their behavior under low-velocity impact loadings,” Composite Structures, 189, 61-69, 2018
  • [33] H. Liu, Y. Zhou, L. Chen, X. Pan, S. Zhu, T. Liu, W. Li, “Drop-weight impact responses and energy absorption of lightweight glass fiber reinforced polypropylene composite hierarchical cylindrical structures,” Thin-Walled Structures 184, 110468, 2023
  • [34] Aluminum 1050-O. https://www.matweb.com/search/DataSheet.aspx?MatGUID=27 3c1ffbdc134a8292c704da3ee2ff35. Access date 18 August 2023
  • [35] Stainless steel-Grade316. https://www.azom.com/properties.aspx?ArticleID=863. Access date 18 August 2023
  • [36] Stainless steel 316. https://www.matweb.com/search/DataSheet.aspx?MatGUID=3a 413dabd215462da3408e6e8b761349. Access date 18 August 2023
  • [37] H.M. Öztemiz, Ş. Temiz, “Mechanical Behaviors Of Different Radii Of Curvature S-Shaped Core Sandwich Composites Subjected To Bending Load,” International Asian Congress On Contemporary Sciences-VI, Van-Türkiye, 200-207, 27-29 May 2022
  • [38] H.M. Öztemiz, Ş. Temiz, “Mechanical Behaviors Of Different Array With S-Shaped Core Sandwich Composites Subjected To Bending Load,” International Asian Congress On Contemporary Sciences-VI, Van-Türkiye, 208-216, 27-29 May 2022
  • [39] E.A. Alwesabi, B.H. Abu Bakar, I.M.H. Alshaikh, H.M. Akil,“Impact resistance of plain and rubberized concrete containing steel and polypropylene hybrid fiber,” Mater Today Commun, DOI: 10.1016/j.mtcomm.2020.101640
  • [40] M. Sahan M, I. Unsal, “An Experimental Analysis for Impact Behaviour of Portland Cement Concrete Substituted with Reclaimed Asphalt Pavement Aggregate, Iranian Journal of Science and Technology,” Transactions of Civil Engineering, 47:2113–2130, 2023 DOI: 10.1007/s40996-023-01052-7
  • [41] ACI 544.2R-89 (1999) Measurement of properties of fiber reinforced concrete. ACI Committee 544

Experimental Analysis and Finite Element Modeling of S-Core Sandwich Panel Composites Drop Impact Response

Yıl 2024, Cilt: 15 Sayı: 1, 131 - 139

Hasan Murat Öztemiz Şemsettin Temiz

https://doi.org/10.24012/dumf.1365978

Öz

Sandwich panel composites have several applications in material technology. The sandwich panel composite material is constructed of stainless steel-316 for the top and bottom plates, aluminum 1050A-0 for the core, and DP-8405 acrylic adhesive for the binding element. The impact behavior of S-core composite sandwich panels was examined using low-velocity drop impact tests and finite element models. Finite element models have been created to characterize the influence of composite element bending behavior on variations. The specific flexural modulus and strength of composite S-core sandwich structures are equivalent to those found in the literature for core structures. As a result, the minimum weight design served as a guideline for producing weight and density-efficient hybrid composite sandwich panels. The energy absorbed in the test findings rose between 15.15% and 30% as the core thickness grew and between 3.571% and 41.34% as the core arrays changed. Impact load-bearing capability increases with varied core heights and array designs.

Anahtar Kelimeler

Low-velocity drop impact test Sandwich panel composites Mechanical behavior S-core Finite element modeling

Destekleyen Kurum

Inonu University

Proje Numarası

BAP Project Code: FDK-2020-2306

Teşekkür

The authors thank Inonu University for funding the project.

Kaynakça

  • [1] M.Ş. Adin, E. Kılıçkap, “Strength of double-reinforced adhesive joints, ” Materials Testing, Feb 23, 2021.DOI: 10.1515/mt-2020-0024
  • [2] H. Adin , B. Yıldız, M.Ş. Adin , “NUMERICAL INVESTIGATION OF FATIGUE BEHAVIOURS OF NONPATCHED AND PATCHED ALUMINIUM PIPES, ” European Journal of Technique (EJT), Volume: 11 Issue: 1, 60 – 65, 2021, DOI: 10.36222/ejt.893327
  • [3] M. Arslan , O. Güler, U. Alver, “ The investigation of the mechanical properties of sandwich panel composites with different surface and core materials’’. Pamukkale University Journal of Engineering Sciences, 24(6),1062-1068, 2018
  • [4] S. Chen, X. Tan, J. Hu, S. Zhu, B. Wang, L. Wang, Y. Jin, L. Wu, “A novel gradient negative stiffness honeycomb for recoverable energy absorption,” Composites Part B: Engineering ,Volume 2, 108745, 2021
  • [5] J. Cao, K. Cai, Q. Wang, J. Shi, “Damage behavior of a bonded sandwich beam with corrugated core under 3-point bending, Material Design Volume, ” 95, 165-172, 2016
  • [6] Y.Zhang, T. Liu, W. Tizani, “Experimental and numerical analysis of dynamic compressive response of Nomex honeycombs,” Composite Part B:Engineering, Volume 148, 27- 39, 2018
  • [7] X. Wu , H. Yu, L. Guo, L. Zhang, X. Sun, Z. Chai, “Experimental and numerical investigation of static and fatigue behaviors of composites honeycomb sandwich structure,” Composite Structure, 165-172, 2019
  • [8] G. Xu, F. Yang, T. Zeng, S. Cheng, Z. Wang, “Bending behavior of graded corrugated truss core composite sandwich beams,” Composite Structure, 342-251, 2016
  • [9] T. Li, L. Wang, “Bending behavior of sandwich composite structures with tunable 3D-printed core materials,” Composite Structure, 46-57, 2017
  • [10] F.C. Potes, J.M. Silva, P.V. Gamboa, “Development and characterization of a natural lightweight composite solution for aircraft structural applications,” Composite Structures, 430-440, 2016
  • [11] J. Forsberg, L. Nilsson, “Evaluation of response surface methodologies used in crashworthiness optimization,” International Journal of Impact Engineering, 759-777, 2006
  • [12] G. Qi, Y.L. Chen, P. Richert , L. Ma , K.U. Schröder, “A hybrid joining insert for sandwich panels with pyramidal lattice truss cores,” Composite Structures, 241, 112-123, 2020
  • [13] X. Lu, V.B.C Tan, T.E. Tay, “Auxeticity of monoclinic tetrachiral honeycombs,’’ Composite Structures, Volume 241, 112067
  • [14] K. Naresh, W.J. Cantwell, “Single and multi-layer core designs for Pseudo-Ductile failure in honeycomb sandwich structures,” Composite Structures, Volume 256, 113059, 2021
  • [15] S. Newstead, L. Watson, M. Cameron., “Vehicle Safety Ratings Estimated From Police Reported Crash Data: 2008 Update,” Monash University Accident Research Center Report, Melbourne, Australia, 280, 2008
  • [16] X.M. Xiang, G. Lu., Z.H. Wang, “Quasi-static bending behavior of sandwich beams with thin-walled tubes as core,” Int J Mech Sci, 55-62, 2015
  • [17] A. Petras, M.P.F. Sutcliffe, “Failure mode maps for honeycomb sandwich panels,” Composite Structure, 237-252, 1999
  • [18] Z. Sun, S. Shi, X. Hu, X. Guo, J. Chen, “Short-aramid-fiber toughening of epoxy adhesive joint between carbon fiber composites and metal sub- strates with different surface morphology,” Composite Part B Engineering, 38-45, 2015
  • [19] H. Adin, M.Ş. Adin, “Effect of particles on tensile and bending properties of jute epoxy composites,” Materials Testing, March 16, 2022. DOI: 10.1515/mt-2021-2038
  • [20] H.B. Rachid, D. Noureddine, B. Benali, M.Ş. Adin, M.Ş., “Effect of nanocomposites rate on the crack propagation in the adhesive of single lap joint subjected to tension,” MECHANICS OF ADVANCED MATERIALS AND STRUCTURES; JUL 22 2023, DOI: 10.1080/15376494.2023.2240319
  • [21] S.D. Pan, L.Z.Wu, Y.G.Sun, Z.G.Zhaou, “Fracture test for double cantilever beam of honeycomb sandwich panels,” Materials Letters, 62, 523-526, 2008
  • [22] Q. Qin, S. Chen, K. Li, M. Jiang, T. Cui, J. Zhang, “Structural impact damage of metal honeycomb sandwich plates,” composite, Volume 252, 112719, 2020
  • [23] Q.H. Qin, T.J. Wang, “Low-velocity impact response of fully clamped metal foam core sandwich beam incorporating local denting effect,” Composite Structures,Volume 96, 346-356, 2013
  • [24] X. Zhang, F. Xu, Y. Zang, W. Feng, “Experimental and numerical investigation on damage behavior of honeycomb sandwich panel subjected to low-velocity impact,” composite structure, Volume 236, 111882, 2020
  • [25] J. Xiong, L. Ma, L. Wu, B.Wang, and A.Vaziri, “Fabrication and crushing behavior of low-density carbon fiber composite pyramidal truss structures,” Composite Structures, Volume 92, 2695-2702, 2010
  • [26] H.P. Wang, C.T. Wu, Y. Guo, E. Mark, A. Botkin, “Coupled meshfree/finite element method for automotive crashworthiness simulations,” International Journal of Impact Engineering, 36(10- 11), 1210-1222
  • [27] J. Mei, J. Liu, W. Huang, “Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling,” Composite Structures, Volume 284, 11520, 2022
  • [28] V.S. Sokolinsky, H. Shen, “Vaikhanski L and Nutt SR., Experimental and analytical study of nonlinear bending response of sandwich beams,” Composite Structures, 60, 219-229, 2003
  • [29] A. Boukar , S. Corn , P. Slangen, P. Ieny, “Finite element modelling of low velocity impact test applied to biaxial glass fiber reinforced laminate composites,” International Journal of Impact Engineering 165,104218, 2022
  • [30] G. Belingardi, R. Vadori, “Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates,” International Journal of Impact Engineering 27, 213–229, 2002
  • [31] H. Yujia, M. Ming, Y. Siya, W. Kai, “Drop-weight impact behaviour of stitched composites: Influence of stitching pattern and stitching space,” Composites: Part A 172,107612, 2023
  • [32] D. Lee, B. Park, S. Park, C. Choi, J. Song, “Fabrication of high-stiffness fiber-metal laminates and study of their behavior under low-velocity impact loadings,” Composite Structures, 189, 61-69, 2018
  • [33] H. Liu, Y. Zhou, L. Chen, X. Pan, S. Zhu, T. Liu, W. Li, “Drop-weight impact responses and energy absorption of lightweight glass fiber reinforced polypropylene composite hierarchical cylindrical structures,” Thin-Walled Structures 184, 110468, 2023
  • [34] Aluminum 1050-O. https://www.matweb.com/search/DataSheet.aspx?MatGUID=27 3c1ffbdc134a8292c704da3ee2ff35. Access date 18 August 2023
  • [35] Stainless steel-Grade316. https://www.azom.com/properties.aspx?ArticleID=863. Access date 18 August 2023
  • [36] Stainless steel 316. https://www.matweb.com/search/DataSheet.aspx?MatGUID=3a 413dabd215462da3408e6e8b761349. Access date 18 August 2023
  • [37] H.M. Öztemiz, Ş. Temiz, “Mechanical Behaviors Of Different Radii Of Curvature S-Shaped Core Sandwich Composites Subjected To Bending Load,” International Asian Congress On Contemporary Sciences-VI, Van-Türkiye, 200-207, 27-29 May 2022
  • [38] H.M. Öztemiz, Ş. Temiz, “Mechanical Behaviors Of Different Array With S-Shaped Core Sandwich Composites Subjected To Bending Load,” International Asian Congress On Contemporary Sciences-VI, Van-Türkiye, 208-216, 27-29 May 2022
  • [39] E.A. Alwesabi, B.H. Abu Bakar, I.M.H. Alshaikh, H.M. Akil,“Impact resistance of plain and rubberized concrete containing steel and polypropylene hybrid fiber,” Mater Today Commun, DOI: 10.1016/j.mtcomm.2020.101640
  • [40] M. Sahan M, I. Unsal, “An Experimental Analysis for Impact Behaviour of Portland Cement Concrete Substituted with Reclaimed Asphalt Pavement Aggregate, Iranian Journal of Science and Technology,” Transactions of Civil Engineering, 47:2113–2130, 2023 DOI: 10.1007/s40996-023-01052-7
  • [41] ACI 544.2R-89 (1999) Measurement of properties of fiber reinforced concrete. ACI Committee 544
Toplam 41 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Malzeme Tasarım ve Davranışları
Bölüm Makaleler
Yazarlar

Hasan Murat Öztemiz 0000-0002-3609-3777

Şemsettin Temiz 0000-0002-6737-3720

Proje Numarası BAP Project Code: FDK-2020-2306
Erken Görünüm Tarihi 29 Mart 2024
Yayımlanma Tarihi
Gönderilme Tarihi 25 Eylül 2023
Yayımlandığı Sayı Yıl 2024 Cilt: 15 Sayı: 1

Kaynak Göster

IEEE H. M. Öztemiz ve Ş. Temiz, “Experimental Analysis and Finite Element Modeling of S-Core Sandwich Panel Composites Drop Impact Response”, DÜMF MD, c. 15, sy. 1, ss. 131–139, 2024, doi: 10.24012/dumf.1365978.
 Kapak Resmi İndir
DUJE tarafından yayınlanan tüm makaleler, Creative Commons Atıf 4.0 Uluslararası Lisansı ile lisanslanmıştır. Bu, orijinal eser ve kaynağın uygun şekilde belirtilmesi koşuluyla, herkesin eseri kopyalamasına, yeniden dağıtmasına, yeniden düzenlemesine, iletmesine ve uyarlamasına izin verir. 24456