Öz
Bu çalışmada, bir çekme yayı yorulma makinesi tasarımı ve üretimi yapılmıştır. Çekme çeneleri pnömatik bir piston ile tahrik edilmektedir. Tasarlanan çalışma basıncı lokal pnömatik şebeke basıncı olan 6 bar’dır. En yüksek tahrik kuvveti 12 kN olarak tasarlanmıştır. Bu sayede, birçok yayı aynı anda test edilebilmektedir. Uygulanan kuvvet pnömatik hava basıncı ayarlayıcısı ile ayarlanabilmektedir. Yorulma döngüleri elektronik bir devre ile kontrol edilmektedir. Yorulma makinesi aynı zamanda belirlenen döngü sayısını tamamlaması için tasarlanmıştır. Bu nedenle, bir sayıcı kontrolcüye eklenmiştir. Makinenin her bir elementinin üretimi ve toleransları detaylı bir biçimde açıklanmıştır.
Anahtar Kelimeler
Proje Numarası
-
Kaynakça
- 1. Y.S. Kong, S. Abdullah, D. Schramm, M.Z. Omar, S.M. Haris, and T. Bruckmann, Mission Profiling of Road Data Measurement for Coil Spring Fatigue Life, Measurement: Journal of the International Measurement Confederation, Elsevier Ltd, 107, 99–110, 2017.
- 2. P. Zhang, D. Wang, Y. Guo, P. Cheng, C. Shao, N. Lang, X. Liu, and J. Huang, Fatigue Failure Analysis and Finite Element Assessment of the Twins Torsion Spring, Engineering Failure Analysis, Elsevier Ltd, 122(July 2020), 105187, 2021.
- 3. Y.T. Tsai, P.C. Lin, Y.W. Chen, S.H. Wang, and J.R. Yang, Fatigue Behavior and Microstructural Characteristics of a Duplex Stainless Steel Weld Metal under Vibration-Assisted Welding, Materials Science and Engineering A, Elsevier B.V., 721(February), 319–327, 2018.
- 4. R. Manouchehrynia, S. Abdullah, and S.S.K. Singh, Fatigue-Based Reliability in Assessing the Failure of an Automobile Coil Spring under Random Vibration Loadings, Engineering Failure Analysis, Elsevier Ltd, 131(September 2021), 105808, 2022.
- 5. D.Q.Q. Wang, Q. Wang, Y.K. Zhu, P. Zhang, Z.J. Zhang, C.X. Ren, X.W. Li, and Z.F. Zhang, Evaluating the Fatigue Cracking Risk of Surface Strengthened 50CrMnMoVNb Spring Steel with Abnormal Life Time Distribution, Materials Science and Engineering A, 732(May), 192–204, 2018.
- 6. U. Karr, Y. Sandaiji, R. Tanegashima, S. Murakami, B. Schönbauer, M. Fitzka, and H. Mayer, Inclusion Initiated Fracture in Spring Steel under Axial and Torsion Very High Cycle Fatigue Loading at Different Load Ratios, International Journal of Fatigue, Elsevier, 134(January), 105525, 2020.
- 7. F. ÖZEN, U. DAM, M.K. ÇOBANOĞLU, E. İLHAN, and S. ASLANLAR, Design and Manufacturing of a Pneumatic Driven Compression Spring Fatigue Machine, European Mechanical Science, 5(4), 189–193, 2021.
- 8. F. Özen, A. Ilhan, H.T. Sezan, E. Ilhan, and S. Aslanlar, Effect of the Galvanization Process on the Fatigue Life of High Strength Steel Compression Springs, Materialpruefung/Materials Testing, 63(3), 226–230, 2021.
- 9. T. Nabagło, A. Jurkiewicz, and J. Kowal, Modeling Verification of an Advanced Torsional Spring for Tracked Vehicle Suspension in 2S1 Vehicle Model, Engineering Structures, 229, 2021.
- 10. H. Mayer, R. Schuller, U. Karr, D. Irrasch, M. Fitzka, M. Hahn, and M. Bacher-Höchst, Cyclic Torsion Very High Cycle Fatigue of VDSiCr Spring Steel at Different Load Ratios, International Journal of Fatigue, Elsevier Ltd, 70, 322–327, 2015.
- 11. T. V. Rajamurugan, K. Shanmugam, and K. Palanikumar, Analysis of Delamination in Drilling Glass Fiber Reinforced Polyester Composites, Materials and Design, Elsevier Ltd, 45, 80–87, 2013.
- 12. V. Močilnik, N. Gubeljak, J. Predan, and J. Flašker, The Influence of Constant Axial Compression Pre-Stress on the Fatigue Failure of Torsion Loaded Tube Springs, Engineering Fracture Mechanics, 77(16), 3132–3142, 2010.
- 13. M. Hietala, A. Järvenpää, M. Keskitalo, M. Jaskari, and K. Mäntyjärvi, Tensile and Fatigue Properties of Laser-Welded Ultra-High-Strength Stainless Spring Steel Lap Joints, Procedia Manufacturing, Elsevier B.V., 36, 131–137, 2019.
- 14. B. Xia, B. Wang, P. Zhang, C. Ren, Q. Duan, X. Li, and Z. Zhang, Improving the High-Cycle Fatigue Life of a High-Strength Spring Steel for Automobiles by Suitable Shot Peening and Heat Treatment, International Journal of Fatigue, Elsevier Ltd, 161(March), 106891, 2022.
- 15. H. Wei, Y. li Chen, W. Yu, L. Su, X. Wang, and D. Tang, Study on Corrosion Resistance of High-Strength Medium-Carbon Spring Steel and Its Hydrogen-Induced Delayed Fracture, Construction and Building Materials, Elsevier Ltd, 239, 117815, 2020.
Öz
In this study, a tension extension spring fatigue machine was designed and manufactured. The force applied by jaws were driven by pneumatic piston. The air pressure is 6 bar that acquired from local pneumatic network. The maximum force was designed to meet at least 12 kN. Thereby, multiple quantity of extension springs can be tested simultaneously. The applied force can be adjusted pneumatic air pressure adjuster. The fatigue cycles were controlled by an electronic circuit. The machine is also designed to complement desired number of fatigue cycles. For this reason, a counter was also added to controller. Manufacturing of the machine elements and its tolerances were also described in detail.
Anahtar Kelimeler
Extension springs Fatigue Fatigue machine. yay uzama yayları
Destekleyen Kurum
-
Proje Numarası
-
Teşekkür
-
Kaynakça
- 1. Y.S. Kong, S. Abdullah, D. Schramm, M.Z. Omar, S.M. Haris, and T. Bruckmann, Mission Profiling of Road Data Measurement for Coil Spring Fatigue Life, Measurement: Journal of the International Measurement Confederation, Elsevier Ltd, 107, 99–110, 2017.
- 2. P. Zhang, D. Wang, Y. Guo, P. Cheng, C. Shao, N. Lang, X. Liu, and J. Huang, Fatigue Failure Analysis and Finite Element Assessment of the Twins Torsion Spring, Engineering Failure Analysis, Elsevier Ltd, 122(July 2020), 105187, 2021.
- 3. Y.T. Tsai, P.C. Lin, Y.W. Chen, S.H. Wang, and J.R. Yang, Fatigue Behavior and Microstructural Characteristics of a Duplex Stainless Steel Weld Metal under Vibration-Assisted Welding, Materials Science and Engineering A, Elsevier B.V., 721(February), 319–327, 2018.
- 4. R. Manouchehrynia, S. Abdullah, and S.S.K. Singh, Fatigue-Based Reliability in Assessing the Failure of an Automobile Coil Spring under Random Vibration Loadings, Engineering Failure Analysis, Elsevier Ltd, 131(September 2021), 105808, 2022.
- 5. D.Q.Q. Wang, Q. Wang, Y.K. Zhu, P. Zhang, Z.J. Zhang, C.X. Ren, X.W. Li, and Z.F. Zhang, Evaluating the Fatigue Cracking Risk of Surface Strengthened 50CrMnMoVNb Spring Steel with Abnormal Life Time Distribution, Materials Science and Engineering A, 732(May), 192–204, 2018.
- 6. U. Karr, Y. Sandaiji, R. Tanegashima, S. Murakami, B. Schönbauer, M. Fitzka, and H. Mayer, Inclusion Initiated Fracture in Spring Steel under Axial and Torsion Very High Cycle Fatigue Loading at Different Load Ratios, International Journal of Fatigue, Elsevier, 134(January), 105525, 2020.
- 7. F. ÖZEN, U. DAM, M.K. ÇOBANOĞLU, E. İLHAN, and S. ASLANLAR, Design and Manufacturing of a Pneumatic Driven Compression Spring Fatigue Machine, European Mechanical Science, 5(4), 189–193, 2021.
- 8. F. Özen, A. Ilhan, H.T. Sezan, E. Ilhan, and S. Aslanlar, Effect of the Galvanization Process on the Fatigue Life of High Strength Steel Compression Springs, Materialpruefung/Materials Testing, 63(3), 226–230, 2021.
- 9. T. Nabagło, A. Jurkiewicz, and J. Kowal, Modeling Verification of an Advanced Torsional Spring for Tracked Vehicle Suspension in 2S1 Vehicle Model, Engineering Structures, 229, 2021.
- 10. H. Mayer, R. Schuller, U. Karr, D. Irrasch, M. Fitzka, M. Hahn, and M. Bacher-Höchst, Cyclic Torsion Very High Cycle Fatigue of VDSiCr Spring Steel at Different Load Ratios, International Journal of Fatigue, Elsevier Ltd, 70, 322–327, 2015.
- 11. T. V. Rajamurugan, K. Shanmugam, and K. Palanikumar, Analysis of Delamination in Drilling Glass Fiber Reinforced Polyester Composites, Materials and Design, Elsevier Ltd, 45, 80–87, 2013.
- 12. V. Močilnik, N. Gubeljak, J. Predan, and J. Flašker, The Influence of Constant Axial Compression Pre-Stress on the Fatigue Failure of Torsion Loaded Tube Springs, Engineering Fracture Mechanics, 77(16), 3132–3142, 2010.
- 13. M. Hietala, A. Järvenpää, M. Keskitalo, M. Jaskari, and K. Mäntyjärvi, Tensile and Fatigue Properties of Laser-Welded Ultra-High-Strength Stainless Spring Steel Lap Joints, Procedia Manufacturing, Elsevier B.V., 36, 131–137, 2019.
- 14. B. Xia, B. Wang, P. Zhang, C. Ren, Q. Duan, X. Li, and Z. Zhang, Improving the High-Cycle Fatigue Life of a High-Strength Spring Steel for Automobiles by Suitable Shot Peening and Heat Treatment, International Journal of Fatigue, Elsevier Ltd, 161(March), 106891, 2022.
- 15. H. Wei, Y. li Chen, W. Yu, L. Su, X. Wang, and D. Tang, Study on Corrosion Resistance of High-Strength Medium-Carbon Spring Steel and Its Hydrogen-Induced Delayed Fracture, Construction and Building Materials, Elsevier Ltd, 239, 117815, 2020.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Makine Mühendisliği, Malzeme Üretim Teknolojileri, Üretim ve Endüstri Mühendisliği |
| Bölüm | Araştırma Makaleleri |
| Yazarlar | |
| Proje Numarası | - |
| Yayımlanma Tarihi | 30 Aralık 2022 |
| Gönderilme Tarihi | 1 Kasım 2022 |
| Yayımlandığı Sayı | Yıl 2022 Cilt: 3 Sayı: 3 |
