THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION

Nehir Tokgoz

doi:10.18186/journal-of-thermal-engineering.409655

Araştırma Makalesi

THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION

Yıl 2018, Cilt: 4 Sayı: 3, 1984 - 1997, 22.03.2018

Nehir Tokgoz

https://doi.org/10.18186/journal-of-thermal-engineering.409655

Cited By: 20

Öz

Heat transfer enhancement
in channel flow is investigated in the present study by using corrugated duct
in lieu of smooth duct. In this regard, periodic different cavities are applied
on the duct walls using the same aspect ratios. The values of the Reynolds
numbers are in the range of 10,000 ≤ Re ≤ 20,000. The effects of the
alumina-water nanofluid flow on the corrugated ducts are alternatively
investigated by using the constant nanoparticle size for further improvement of
the thermal characteristics. Computations are performed by means of finite
volume approach on three different corrugated shapes. The effects of various
parameters on the heat and fluid flow are also studied. The obtained results
have revealed that the application of corrugated duct increases the rate of
turbulent intensity on the central axis of the duct. In addition, it is found
that the rate of heat transfer changes as a result of corrugated shape and
Reynolds number. Furthermore, it is demonstrated that the application of the
alumina-water flow in such ducts enhances the rate of the heat transfer and
thermal performance when compared with the water flow. It is hoped that the
obtained results will arouse interest towards thermal design.

Anahtar Kelimeler

Channel Flow, Corrugated Duct, Heat Transfer Enhancement, Nanofluid

Kaynakça

[1] Khanafer, K., Vafai, K., & Lightstone, M. (2003). Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids. International Journal of Heat and Mass Transfer, 46(19), 3639-3653.
[2] Xuan, Y., Li, Q., & Hu, W. (2003). Aggregation structure and thermal conductivity of nanofluids. AIChE Journal, 49(4), 1038-1043.
[3] Xuan, Y., & Li, Q. (2003). Investigation on convective heat transfer and flow features of nanofluids. Journal of Heat transfer, 125(1), 151-155.
[4] Yang, Y., Zhang, Z. G., Grulke, E. A., Anderson, W. B., & Wu, G. (2005). Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow. International Journal of Heat and Mass Transfer, 48(6), 1107-1116.
[5] Santra, A. K., Sen, S., & Chakraborty, N. (2009). Study of heat transfer due to laminar flow of copper–water nanofluid through two isothermally heated parallel plates. International Journal of Thermal Sciences, 48(2), 391-400.
[6] Kakaç, S., & Pramuanjaroenkij, A. (2009). Review of convective heat transfer enhancement with nanofluids. International Journal of Heat and Mass Transfer, 52(13-14), 3187-3196.
[7] Nield, D., & Kuznetsov, A. (2014). Forced convection in a parallel-plate channel occupied by a nanofluid or a porous medium saturated by a nanofluid. International Journal of Heat and Mass Transfer, 70, 430-433.
[8] Selimefendigil, F., & Öztop, H. F. (2014). Pulsating nanofluids jet impingement cooling of a heated horizontal surface. International Journal of Heat and Mass Transfer, 69, 54-65.
[9] Manca, O., Nardini, S., & Ricci, D. (2012). A numerical study of nanofluid forced convection in ribbed channels. Applied Thermal Engineering, 37, 280-292.
[10] Karmare, S., & Tikekar, A. (2007). Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs. International Journal of Heat and Mass Transfer, 50(21-22), 4342-4351.
[11] Liu, H., & Wang, J. (2011). Numerical investigation on synthetical performances of fluid flow and heat transfer of semiattached rib-channels. International Journal of Heat and Mass Transfer, 54(1-3), 575-583.
[12] Peng, W., Jiang, P.-X., Wang, Y.-P., & Wei, B.-Y. (2011). Experimental and numerical investigation of convection heat transfer in channels with different types of ribs. Applied Thermal Engineering, 31(14-15), 2702-2708.
[13] Promvonge, P., Changcharoen, W., Kwankaomeng, S., & Thianpong, C. (2011). Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs. International Communications in Heat and Mass Transfer, 38(10), 1392-1399.
[14] Choi, S. U., & Eastman, J. A. (1995). Enhancing thermal conductivity of fluids with nanoparticles. (No. ANL/MSD/CP--84938; CONF-951135--29). Argonne National Lab., IL (United States).
[15] Lee, S., Choi, S. S., Li, S. A., and, & Eastman, J. A. (1999). Measuring thermal conductivity of fluids containing oxide nanoparticles. Journal of Heat transfer, 121(2), 280-289.
[16] Xuan, Y., & Li, Q. (2000). Heat transfer enhancement of nanofluids. International Journal of heat and fluid flow, 21(1), 58-64.
[17] Das, S. K., Choi, S. U., Yu, W., & Pradeep, T. (2007). Nanofluids: science and technology: John Wiley & Sons.
[18] Ding, Y., Chen, H., Wang, L., Yang, C. Y., He, Y., Yang, W., … & Huo, R. (2007). Heat transfer intensification using nanofluids. KONA Powder and Particle Journal, 25, 23-38.
[19] Bilgen, E. (2005). Natural convection in cavities with a thin fin on the hot wall. International Journal of Heat and Mass Transfer, 48(17), 3493-3505.
[20] Hasnaoui, M., Bilgen, E., & Vasseur, P. (1991). Natural convection above an array of open cavities heated from below. Numerical Heat Transfer, 18(4), 463-482.
[21] Varol, Y., Oztop, H. F., & Varol, A. (2007). Natural convection in porous triangular enclosures with a solid adiabatic fin attached to the horizontal wall. International Communications in Heat and Mass Transfer, 34(1), 19-27.
[22] Heidary, H., Pirmohammadi, M., & Davoudi, M. (2012). Control of free convection and entropy generation in inclined porous media. Heat Transfer Engineering, 33(6), 565-573.
[23] Valinataj-Bahnemiri, P., Ramiar, A., Manavi, S., & Mozaffari, A. (2015). Heat transfer optimization of two phase modeling of nanofluid in a sinusoidal wavy channel using Artificial Bee Colony technique. Engineering Science and Technology, an International Journal, 18(4), 727-737.
[24] Tiwari, A. K., Ghosh, P., Sarkar, J., Dahiya, H., & Parekh, J. (2014). Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids. International Journal of Thermal Sciences, 85, 93-103.
[25] Darzi, A. A. R., Farhadi, M., & Sedighi, K. (2014). Experimental investigation of convective heat transfer and friction factor of Al2O3/water nanofluid in helically corrugated tube. Experimental Thermal and Fluid Science, 57, 188-199.
[26] Navaei, A., Mohammed, H., Munisamy, K., Yarmand, H., & Gharehkhani, S. (2015). Heat transfer enhancement of turbulent nanofluid flow over various types of internally corrugated channels. Powder Technology, 286, 332-341.
[27] Kareem, Z. S., Abdullah, S., Lazim, T. M., Jaafar, M. M., & Wahid, A. F. A. (2015). Heat transfer enhancement in three-start spirally corrugated tube: Experimental and numerical study. Chemical Engineering Science, 134, 746-757.
[28] Ramadhan, A. A., Al Anii, Y. T., & Shareef, A. J. (2013). Groove geometry effects on turbulent heat transfer and fluid flow. Heat and Mass Transfer, 49(2), 185-195.
[29] Sharma, K., Sundar, L. S., & Sarma, P. (2009). Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert. International Communications in Heat and Mass Transfer, 36(5), 503-507.
[30] Shahi, M., Mahmoudi, A. H., & Talebi, F. (2011). A numerical investigation of conjugated-natural convection heat transfer enhancement of a nanofluid in an annular tube driven by inner heat generating solid cylinder. International Communications in Heat and Mass Transfer, 38(4), 533-542.
[31] Patankar, S. (1980). Numerical heat transfer and fluid flow. CRC press.
[32] Wilcox, D. C. (1988). Reassessment of the scale-determining equation for advanced turbulence models. AIAA journal, 26(11), 1299-1310.
[33] Vanaki, S. M., Mohammed, H., Abdollahi, A., & Wahid, M. (2014). Effect of nanoparticle shapes on the heat transfer enhancement in a wavy channel with different phase shifts. Journal of Molecular Liquids, 196, 32-42.
[34] Weihing, P., Younis, B., & Weigand, B. (2014). Heat transfer enhancement in a ribbed channel: Development of turbulence closures. International Journal of Heat and Mass Transfer, 76, 509-522.
[35] Ağra, Ö., Demir, H., Atayılmaz, Ş. Ö., Kantaş, F., & Dalkılıç, A. S. (2011). Numerical investigation of heat transfer and pressure drop in enhanced tubes. International Communications in Heat and Mass Transfer, 38(10), 1384-1391.
[36] Sahin, B., Gültekin, G. G., Manay, E., & Karagoz, S. (2013). Experimental investigation of heat transfer and pressure drop characteristics of Al2O3–water nanofluid. Experimental Thermal and Fluid Science, 50, 21-28.
[37] Petukhov, B. (1970). Heat transfer and friction in turbulent pipe flow with variable physical properties Advances in heat transfer (Vol. 6, pp. 503-564): Elsevier.
[38] Mohamad, A. (2015). Myth about nano-fluid heat transfer enhancement. International Journal of Heat and Mass Transfer, 86, 397-403.

Yıl 2018, Cilt: 4 Sayı: 3, 1984 - 1997, 22.03.2018

Nehir Tokgoz

https://doi.org/10.18186/journal-of-thermal-engineering.409655

Cited By: 20

Öz

Kaynakça

[1] Khanafer, K., Vafai, K., & Lightstone, M. (2003). Buoyancy-driven heat transfer enhancement in a two-dimensional enclosure utilizing nanofluids. International Journal of Heat and Mass Transfer, 46(19), 3639-3653.
[2] Xuan, Y., Li, Q., & Hu, W. (2003). Aggregation structure and thermal conductivity of nanofluids. AIChE Journal, 49(4), 1038-1043.
[3] Xuan, Y., & Li, Q. (2003). Investigation on convective heat transfer and flow features of nanofluids. Journal of Heat transfer, 125(1), 151-155.
[4] Yang, Y., Zhang, Z. G., Grulke, E. A., Anderson, W. B., & Wu, G. (2005). Heat transfer properties of nanoparticle-in-fluid dispersions (nanofluids) in laminar flow. International Journal of Heat and Mass Transfer, 48(6), 1107-1116.
[5] Santra, A. K., Sen, S., & Chakraborty, N. (2009). Study of heat transfer due to laminar flow of copper–water nanofluid through two isothermally heated parallel plates. International Journal of Thermal Sciences, 48(2), 391-400.
[6] Kakaç, S., & Pramuanjaroenkij, A. (2009). Review of convective heat transfer enhancement with nanofluids. International Journal of Heat and Mass Transfer, 52(13-14), 3187-3196.
[7] Nield, D., & Kuznetsov, A. (2014). Forced convection in a parallel-plate channel occupied by a nanofluid or a porous medium saturated by a nanofluid. International Journal of Heat and Mass Transfer, 70, 430-433.
[8] Selimefendigil, F., & Öztop, H. F. (2014). Pulsating nanofluids jet impingement cooling of a heated horizontal surface. International Journal of Heat and Mass Transfer, 69, 54-65.
[9] Manca, O., Nardini, S., & Ricci, D. (2012). A numerical study of nanofluid forced convection in ribbed channels. Applied Thermal Engineering, 37, 280-292.
[10] Karmare, S., & Tikekar, A. (2007). Heat transfer and friction factor correlation for artificially roughened duct with metal grit ribs. International Journal of Heat and Mass Transfer, 50(21-22), 4342-4351.
[11] Liu, H., & Wang, J. (2011). Numerical investigation on synthetical performances of fluid flow and heat transfer of semiattached rib-channels. International Journal of Heat and Mass Transfer, 54(1-3), 575-583.
[12] Peng, W., Jiang, P.-X., Wang, Y.-P., & Wei, B.-Y. (2011). Experimental and numerical investigation of convection heat transfer in channels with different types of ribs. Applied Thermal Engineering, 31(14-15), 2702-2708.
[13] Promvonge, P., Changcharoen, W., Kwankaomeng, S., & Thianpong, C. (2011). Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs. International Communications in Heat and Mass Transfer, 38(10), 1392-1399.
[14] Choi, S. U., & Eastman, J. A. (1995). Enhancing thermal conductivity of fluids with nanoparticles. (No. ANL/MSD/CP--84938; CONF-951135--29). Argonne National Lab., IL (United States).
[15] Lee, S., Choi, S. S., Li, S. A., and, & Eastman, J. A. (1999). Measuring thermal conductivity of fluids containing oxide nanoparticles. Journal of Heat transfer, 121(2), 280-289.
[16] Xuan, Y., & Li, Q. (2000). Heat transfer enhancement of nanofluids. International Journal of heat and fluid flow, 21(1), 58-64.
[17] Das, S. K., Choi, S. U., Yu, W., & Pradeep, T. (2007). Nanofluids: science and technology: John Wiley & Sons.
[18] Ding, Y., Chen, H., Wang, L., Yang, C. Y., He, Y., Yang, W., … & Huo, R. (2007). Heat transfer intensification using nanofluids. KONA Powder and Particle Journal, 25, 23-38.
[19] Bilgen, E. (2005). Natural convection in cavities with a thin fin on the hot wall. International Journal of Heat and Mass Transfer, 48(17), 3493-3505.
[20] Hasnaoui, M., Bilgen, E., & Vasseur, P. (1991). Natural convection above an array of open cavities heated from below. Numerical Heat Transfer, 18(4), 463-482.
[21] Varol, Y., Oztop, H. F., & Varol, A. (2007). Natural convection in porous triangular enclosures with a solid adiabatic fin attached to the horizontal wall. International Communications in Heat and Mass Transfer, 34(1), 19-27.
[22] Heidary, H., Pirmohammadi, M., & Davoudi, M. (2012). Control of free convection and entropy generation in inclined porous media. Heat Transfer Engineering, 33(6), 565-573.
[23] Valinataj-Bahnemiri, P., Ramiar, A., Manavi, S., & Mozaffari, A. (2015). Heat transfer optimization of two phase modeling of nanofluid in a sinusoidal wavy channel using Artificial Bee Colony technique. Engineering Science and Technology, an International Journal, 18(4), 727-737.
[24] Tiwari, A. K., Ghosh, P., Sarkar, J., Dahiya, H., & Parekh, J. (2014). Numerical investigation of heat transfer and fluid flow in plate heat exchanger using nanofluids. International Journal of Thermal Sciences, 85, 93-103.
[25] Darzi, A. A. R., Farhadi, M., & Sedighi, K. (2014). Experimental investigation of convective heat transfer and friction factor of Al2O3/water nanofluid in helically corrugated tube. Experimental Thermal and Fluid Science, 57, 188-199.
[26] Navaei, A., Mohammed, H., Munisamy, K., Yarmand, H., & Gharehkhani, S. (2015). Heat transfer enhancement of turbulent nanofluid flow over various types of internally corrugated channels. Powder Technology, 286, 332-341.
[27] Kareem, Z. S., Abdullah, S., Lazim, T. M., Jaafar, M. M., & Wahid, A. F. A. (2015). Heat transfer enhancement in three-start spirally corrugated tube: Experimental and numerical study. Chemical Engineering Science, 134, 746-757.
[28] Ramadhan, A. A., Al Anii, Y. T., & Shareef, A. J. (2013). Groove geometry effects on turbulent heat transfer and fluid flow. Heat and Mass Transfer, 49(2), 185-195.
[29] Sharma, K., Sundar, L. S., & Sarma, P. (2009). Estimation of heat transfer coefficient and friction factor in the transition flow with low volume concentration of Al2O3 nanofluid flowing in a circular tube and with twisted tape insert. International Communications in Heat and Mass Transfer, 36(5), 503-507.
[30] Shahi, M., Mahmoudi, A. H., & Talebi, F. (2011). A numerical investigation of conjugated-natural convection heat transfer enhancement of a nanofluid in an annular tube driven by inner heat generating solid cylinder. International Communications in Heat and Mass Transfer, 38(4), 533-542.
[31] Patankar, S. (1980). Numerical heat transfer and fluid flow. CRC press.
[32] Wilcox, D. C. (1988). Reassessment of the scale-determining equation for advanced turbulence models. AIAA journal, 26(11), 1299-1310.
[33] Vanaki, S. M., Mohammed, H., Abdollahi, A., & Wahid, M. (2014). Effect of nanoparticle shapes on the heat transfer enhancement in a wavy channel with different phase shifts. Journal of Molecular Liquids, 196, 32-42.
[34] Weihing, P., Younis, B., & Weigand, B. (2014). Heat transfer enhancement in a ribbed channel: Development of turbulence closures. International Journal of Heat and Mass Transfer, 76, 509-522.
[35] Ağra, Ö., Demir, H., Atayılmaz, Ş. Ö., Kantaş, F., & Dalkılıç, A. S. (2011). Numerical investigation of heat transfer and pressure drop in enhanced tubes. International Communications in Heat and Mass Transfer, 38(10), 1384-1391.
[36] Sahin, B., Gültekin, G. G., Manay, E., & Karagoz, S. (2013). Experimental investigation of heat transfer and pressure drop characteristics of Al2O3–water nanofluid. Experimental Thermal and Fluid Science, 50, 21-28.
[37] Petukhov, B. (1970). Heat transfer and friction in turbulent pipe flow with variable physical properties Advances in heat transfer (Vol. 6, pp. 503-564): Elsevier.
[38] Mohamad, A. (2015). Myth about nano-fluid heat transfer enhancement. International Journal of Heat and Mass Transfer, 86, 397-403.

Toplam 38 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Bölüm	Makaleler
Yazarlar	Nehir Tokgoz
Yayımlanma Tarihi	22 Mart 2018
Gönderilme Tarihi	9 Ağustos 2016
Yayımlandığı Sayı	Yıl 2018 Cilt: 4 Sayı: 3

Kaynak Göster

APA	Tokgoz, N. (2018). THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION. Journal of Thermal Engineering, 4(3), 1984-1997. https://doi.org/10.18186/journal-of-thermal-engineering.409655
AMA	Tokgoz N. THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION. Journal of Thermal Engineering. Mart 2018;4(3):1984-1997. doi:10.18186/journal-of-thermal-engineering.409655
Chicago	Tokgoz, Nehir. “THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION”. Journal of Thermal Engineering 4, sy. 3 (Mart 2018): 1984-97. https://doi.org/10.18186/journal-of-thermal-engineering.409655.
EndNote	Tokgoz N (01 Mart 2018) THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION. Journal of Thermal Engineering 4 3 1984–1997.
IEEE	N. Tokgoz, “THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION”, Journal of Thermal Engineering, c. 4, sy. 3, ss. 1984–1997, 2018, doi: 10.18186/journal-of-thermal-engineering.409655.
ISNAD	Tokgoz, Nehir. “THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION”. Journal of Thermal Engineering 4/3 (Mart 2018), 1984-1997. https://doi.org/10.18186/journal-of-thermal-engineering.409655.
JAMA	Tokgoz N. THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION. Journal of Thermal Engineering. 2018;4:1984–1997.
MLA	Tokgoz, Nehir. “THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION”. Journal of Thermal Engineering, c. 4, sy. 3, 2018, ss. 1984-97, doi:10.18186/journal-of-thermal-engineering.409655.
Vancouver	Tokgoz N. THE NUMERICAL STUDY OF HEAT TRANSFER ENHANCEMENT USING AL2O3-WATER NANOFLUID IN CORRUGATED DUCT APPLICATION. Journal of Thermal Engineering. 2018;4(3):1984-97.