BibTex RIS Kaynak Göster

Utilisation of MDF waste for wood plastic composites production

Yıl 2014, Cilt: 15 Sayı: 1, 65 - 71, 26.05.2014
https://doi.org/10.18182/tjf.64025

Öz

The aim of this study was to evaluate the potential utilization of fibre board waste generated from forest industry and furniture manufacturers in the production of wood plastic composite (WPC) for replacing wood flour. For production of WPC, polypropylene (PP) was chosen as polymer matrix, and eight different compositions were prepared with the co-rotating twin-screw extruder to compound them into pellets. WPC were produced at the size of 25 cm x 25 cm and 2 mm from these pellets (MDF flour loading varies 10 to 50 weight %) by hot press with the compression moulded technique according to ASTM D4703-10. For each composition, three composites were produced and ten specimens were prepared from these composites for tensile, flexural and notched impact specimens The tensile, flexural and impact properties of the manufactured samples were determined in accordance with ASTM D638, ASTM D6109, and ASTM D256, respectively. Morphological properties of the samples were characterized with scanning electron microscopy (SEM) analysis. Tensile and impact strength values decreased with increasing MDF flour loading whereas MOE values were improved with addition of MDF flour. All produced MDF flour filled composites showed better MOE and bending strength properties than ASTM D6662-13 standard requirements for polyolefin-based plastic lumber.
Keywords: Wood plastic composites, Polypropylene, Medium density fiberboard flour

Kaynakça

  • American Society for Testing and Materials, 2001; ASTM D638, Standard test methods for tensile properties of plastics. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2005; ASTM D6109, Standard test methods for flexural properties of unreinforced and reinforced plastic lumber and related products. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2005; ASTM D256, Standard test methods for impact resistance of plastics and electrical insulating materials. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2010; ASTM D4703-10, Standard practice for compression molding thermoplastic materials into test specimens, plaques, or sheets, ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2013; ASTM D 6662, Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards, ASTM, West Conshohocken.
  • Ashori, A. 2008. Wood-plastic composites as promising green-composites for automotive industries. Bioresource Technology, 99: 4661-4667.
  • Bromhead, A., 2003. Reducing Wood Waste in Furniture Manufacture. Fauna & Flora International, Cambridge. Bledzki, A.K., Reihmane, S., Gassan, J., 1998. Thermoplastic reinforced with wood fillers: A literature review, Polymer Plastic Technology and Engineering, 37: 451-468.
  • Chaharmahali, M., Tajvidi, M., Najafi, S.K:, 2008. Mechanical properties of wood plastic composite panels made from waste fibreboard and particleboard. Polymer Composites, 29(6): 606-610.
  • Çetin, N.S., Özmen, N., Narlıoğlu, N., Çavuş, V., 2013. Ağaç kabuğunun YYPE kompozitlerin mekanik özellikleri üzerine etkileri. II. Ulusal Ege Kompozit Malzemeler Sempozyumu, 452-463.
  • Dayanıklıoğlu, S. 2013. Türkiye’de Yonga ve Lif Levha Mobilya Sektörü. http://www.mobilyadergisi.com.tr/default.asp?page=gun cel&Gunceltur=235, Erişim: 10.10.2013 Dekorasyon.
  • Hillig, E., Iwakiri, S., Andrade, M.Z., Zatera, A.J., 2008. Characterization of composites made from high density polyethylene and furniture industry sawdust. Revista Arvore, 32(2): 299-310.
  • İlhan, R., Burdurlu, E., Baykan, İ., 1990. Ağaç işlerinde kesme teorisi ve mobilya endüstrisi makineleri. Bizim Büro Basımevi, Ankara.
  • Jayaraman, K., Bhattacharyya, D., 2004. Mechanical properties of wood fibre-waste plastic composite materials, Resources Conservation and Recycling, 41: 307-319.
  • Najafi, A., Khademi-Eslam, H., 2011. Lignocellulosic filler/recycled HDPE composites: Effect of filler type on physical and flexural properties. Bioresources, 6(3): 2411-2424.
  • Klyosov, A.A., 2007. Wood Plastic Composites, John Wiley and Sons, New Jersey.
  • Komwood, 2013. Ahşap Plastik Kompozit Nedir?, http://www.komwood.com.tr/TR/15/Ahsap-Plastik- Kompozit-Nedir?.htm, Erişim : 03.09.2013.
  • Shams, M., Vaysi, R., Hossinzaheh, S., 2010. Study on some mechanical properties of composites made from the flour of MDF flour/reed flour and recycled polypropylene, Proceedings of International Convention of Societyof Wood Science and Technology and United
  • Nations Economic Commission for Europe – Timber Committee, Geneva.

MDF atıklarının odun plastik kompozitlerin üretiminde değerlendirilmesi

Yıl 2014, Cilt: 15 Sayı: 1, 65 - 71, 26.05.2014
https://doi.org/10.18182/tjf.64025

Öz

Bu çalışmada, orman endüstrisinin ve mobilya fabrikalarının üretim esnasında açığa çıkan lif levha atıklarının odun plastik kompozitlerin üretiminde odun unu yerine potansiyel olarak değerlendirilmesi hedeflenmiştir. Odun plastik kompozit (OPK) üretiminde polimer matris olarak polipropilen (PP) seçilmiş ve %10 ile %50 arasında lif levha atık unu ile sekiz farklı parametrede çift vidalı ekstrüder kullanılarak pellet üretimi gerçekleştirilmiştir. Üretilen pelletlerden 25 cm x 25 cm ve 2 mm ebatlarında ASTM D4703-10'a göre sıcak pres kalıplama tekniği yöntemiyle odun plastik kompozitler üretilmiştir. Her bir karışım parametresi için üç levha üretilmiş ve bunlardan on adet çekme, eğilme ve darbe direnç test örnekleri hazırlanmıştır. Hazırlanan örneklerin çekme, eğilme ve darbe dayanımı testleri sırası ile ASTM D638, ASTM D6109 ve ASTM256'ya göre tespit edilmiştir. Kopma yüzeyleri taramalı elektron mikroskobu (SEM) ile karakterize edilmiştir. MDF unu katılım oranının artmasına bağlı olarak çekme ve darbe direnç değerlerinde belirgin düşüşler gözlenmiştir. MDF unu takviyeli kompozitlerin elastikiyet modülü ve eğilme direnci değerleri plastik keresteler için ASTM D 6662 standardında istenen değerlerin çok üstünde olup plastik kereste kullanım alanlarında kullanılabileceği sonucuna ulaşılmıştır.
Anahtar kelimeler: Odun plastik kompozitler, Polipropilen, Orta yoğunlukta lif levha unu

Kaynakça

  • American Society for Testing and Materials, 2001; ASTM D638, Standard test methods for tensile properties of plastics. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2005; ASTM D6109, Standard test methods for flexural properties of unreinforced and reinforced plastic lumber and related products. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2005; ASTM D256, Standard test methods for impact resistance of plastics and electrical insulating materials. ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2010; ASTM D4703-10, Standard practice for compression molding thermoplastic materials into test specimens, plaques, or sheets, ASTM, West Conshohocken.
  • American Society for Testing and Materials, 2013; ASTM D 6662, Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards, ASTM, West Conshohocken.
  • Ashori, A. 2008. Wood-plastic composites as promising green-composites for automotive industries. Bioresource Technology, 99: 4661-4667.
  • Bromhead, A., 2003. Reducing Wood Waste in Furniture Manufacture. Fauna & Flora International, Cambridge. Bledzki, A.K., Reihmane, S., Gassan, J., 1998. Thermoplastic reinforced with wood fillers: A literature review, Polymer Plastic Technology and Engineering, 37: 451-468.
  • Chaharmahali, M., Tajvidi, M., Najafi, S.K:, 2008. Mechanical properties of wood plastic composite panels made from waste fibreboard and particleboard. Polymer Composites, 29(6): 606-610.
  • Çetin, N.S., Özmen, N., Narlıoğlu, N., Çavuş, V., 2013. Ağaç kabuğunun YYPE kompozitlerin mekanik özellikleri üzerine etkileri. II. Ulusal Ege Kompozit Malzemeler Sempozyumu, 452-463.
  • Dayanıklıoğlu, S. 2013. Türkiye’de Yonga ve Lif Levha Mobilya Sektörü. http://www.mobilyadergisi.com.tr/default.asp?page=gun cel&Gunceltur=235, Erişim: 10.10.2013 Dekorasyon.
  • Hillig, E., Iwakiri, S., Andrade, M.Z., Zatera, A.J., 2008. Characterization of composites made from high density polyethylene and furniture industry sawdust. Revista Arvore, 32(2): 299-310.
  • İlhan, R., Burdurlu, E., Baykan, İ., 1990. Ağaç işlerinde kesme teorisi ve mobilya endüstrisi makineleri. Bizim Büro Basımevi, Ankara.
  • Jayaraman, K., Bhattacharyya, D., 2004. Mechanical properties of wood fibre-waste plastic composite materials, Resources Conservation and Recycling, 41: 307-319.
  • Najafi, A., Khademi-Eslam, H., 2011. Lignocellulosic filler/recycled HDPE composites: Effect of filler type on physical and flexural properties. Bioresources, 6(3): 2411-2424.
  • Klyosov, A.A., 2007. Wood Plastic Composites, John Wiley and Sons, New Jersey.
  • Komwood, 2013. Ahşap Plastik Kompozit Nedir?, http://www.komwood.com.tr/TR/15/Ahsap-Plastik- Kompozit-Nedir?.htm, Erişim : 03.09.2013.
  • Shams, M., Vaysi, R., Hossinzaheh, S., 2010. Study on some mechanical properties of composites made from the flour of MDF flour/reed flour and recycled polypropylene, Proceedings of International Convention of Societyof Wood Science and Technology and United
  • Nations Economic Commission for Europe – Timber Committee, Geneva.
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Orijinal Araştırma Makalesi
Yazarlar

Nilgül Özmen

Nihat Çetin

Nasır Narlıoğlu Bu kişi benim

Vedat Çavuş

Ertuğrul Altuntaş

Yayımlanma Tarihi 26 Mayıs 2014
Yayımlandığı Sayı Yıl 2014 Cilt: 15 Sayı: 1

Kaynak Göster

APA Özmen, N., Çetin, N., Narlıoğlu, N., Çavuş, V., vd. (2014). Utilisation of MDF waste for wood plastic composites production. Turkish Journal of Forestry, 15(1), 65-71. https://doi.org/10.18182/tjf.64025
AMA Özmen N, Çetin N, Narlıoğlu N, Çavuş V, Altuntaş E. Utilisation of MDF waste for wood plastic composites production. Turkish Journal of Forestry. Mayıs 2014;15(1):65-71. doi:10.18182/tjf.64025
Chicago Özmen, Nilgül, Nihat Çetin, Nasır Narlıoğlu, Vedat Çavuş, ve Ertuğrul Altuntaş. “Utilisation of MDF Waste for Wood Plastic Composites Production”. Turkish Journal of Forestry 15, sy. 1 (Mayıs 2014): 65-71. https://doi.org/10.18182/tjf.64025.
EndNote Özmen N, Çetin N, Narlıoğlu N, Çavuş V, Altuntaş E (01 Mayıs 2014) Utilisation of MDF waste for wood plastic composites production. Turkish Journal of Forestry 15 1 65–71.
IEEE N. Özmen, N. Çetin, N. Narlıoğlu, V. Çavuş, ve E. Altuntaş, “Utilisation of MDF waste for wood plastic composites production”, Turkish Journal of Forestry, c. 15, sy. 1, ss. 65–71, 2014, doi: 10.18182/tjf.64025.
ISNAD Özmen, Nilgül vd. “Utilisation of MDF Waste for Wood Plastic Composites Production”. Turkish Journal of Forestry 15/1 (Mayıs 2014), 65-71. https://doi.org/10.18182/tjf.64025.
JAMA Özmen N, Çetin N, Narlıoğlu N, Çavuş V, Altuntaş E. Utilisation of MDF waste for wood plastic composites production. Turkish Journal of Forestry. 2014;15:65–71.
MLA Özmen, Nilgül vd. “Utilisation of MDF Waste for Wood Plastic Composites Production”. Turkish Journal of Forestry, c. 15, sy. 1, 2014, ss. 65-71, doi:10.18182/tjf.64025.
Vancouver Özmen N, Çetin N, Narlıoğlu N, Çavuş V, Altuntaş E. Utilisation of MDF waste for wood plastic composites production. Turkish Journal of Forestry. 2014;15(1):65-71.

Cited By