MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES

Hayriye Hale Aygün

doi:10.17780/ksujes.673020

TR

MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES

An Erratum to this article was published on December 3, 2025. http://dergipark.org.tr/en/pub/ksujes/article/1810363

Abstract

Glass fiber is the most popular reinforcement material for improving mechanical properties of composites. While tranforming glass fiber filaments to chopped ones, too many waste glass fiber exists. This paper deals with waste glass fiber usage in composites with melamin matris. Tensile strength behaviour, bending resistance, specific gravity and impact resistance of samples were analysed. Results showed that homogenity of composite mixture was very important in characteristics of end products. Increase in specific gravity was negligible because reinforcing material, namely waste glass fiber, was less sensitive than melamine thermoset to hot pressing method. Thereto, waste glass fiber reinforcement enhanced the tensile resistance and impact strength up to 30% and 20%, respectively. Addition of glass fiber waste lead to a sharp decrease in bending resistance, approximately 50%.

Keywords

waste glass fiber,composite,melamine,mechanical properties

Supporting Institution

KSU

Project Number

2011/7-10YLS

Thanks

Author would like to express very great appreciation to managers and stuff of Özgül Melamin Inc. Co. and Cam Elyaf Inc. Co. for their assistance.

References

Agarwall, B. D., Bioutman, L. J., & Chandrashekhara, K. (2006). Analysis and performance of fiber composites. New York: John Wiley & Sons.
ASTM D792, Standard test methods for density and specific gravity (relative density) of plastics by displacement
ASTM D3039, Standard test method for tensile properties of polymer matrix composite materials
Bhaskar, V. V. & Srinivas, K. (2017) Mechanical characterization of glass fiber (woven roving/chopped strand mat E-glass fiber) reinforced polyester composites. AIP Conference Proceedings. doi: 10.1063/1.4990261.
Bhatti, A. R., & Farries, P. M. (2000). Carbon/Carbon, Cement and Ceramic Matrix Composites. In: Warren, R. (Eds), Comprehensive Composite Materials. (4th ed). New York: Oxford University Press.
Biswas, S., Deo, B., Patnaik, A. & Satapathy, A. (2011) Effect of fiber loading and orientation on mechanical and erosion wear behaviors of glass– epoxy composites. Polymer Composites. 32, 665-674.
Callister, W. D. (2006). Materials science and engineering: an introduction. (7th ed). New York: John Wiley & Sons.
Gibbons, J. H. (1988). Polymer matrix composites in advanced materials by design. Washington: U.S. Congress, Office of Technology Assessment.

Harper, C. A. (2002). Handbook of plastics, elastomers and composites. New York: McGraw Hill.
Hull, D., & Clyne, T. W. (1996). An introduction to composite materials. (2nd ed). Cambridge: Cambridge University Press.
ISO 178, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ISO 180, Plastics - Determination of izod impact strength
Ku, H., Epaarachchi, J., Trada, M., & Wong, P. (2013). Modelling of tensile properties glass powder/epoxy composites post-cured in an oven and in microwaves. Journal of Reinforced Plastics and Composites, 32(10), 689–699.
Ku, H., Trade, M., Nixon, R., & Wong, P. (2010). Flexural properties of phenolic resin reinforced with glass powder: preliminary results. Journal of Applied Polymer Science, 116 (1), 347–354.
Ku, H., Wong, P., Huang, J., Fung, H., & Trada, M. (2011). Tensile tests of glass powder reinforced epoxy composites: pilot study. Advanced Materials Research. 214, 1–5.
Ku, H., Wong, P., Huang, J., Fung, H., & Trada, M. (2012). Flexural properties of epoxy composites filled with glass powder: preliminary results. Advanced Materials Research, 410, 309–312.
Kusaseh,N. M., Nuruzzaman, D. M., Ismail, N. M., Hamedon, Z., Azhari, A., & Iqbal, A. K. M. A. (2018). Flexure and impact properties of glass fiber reinforced nylon 6-polypropylene composites. IOP Conf. Series: Materials Science and Engineering. doi:10.1088/1757-899X/319/1/012045
Lee, J., Park, S. B., Lee, J. S., Kim, J. W. (2017) Improvement in mechanical properties of glass fiber fabric/PVC composites with chopped glass fibers and coupling agent. Materials Research Express, 4 (7), 075303.
Mallick, P. K. (1993). Fiber Reinforced Composites: Materials, Manufacturing and Design. New York: Marcel Dekker Inc.
Nayak, S. Y., Heckadka, S. S., Thomas, L. G. & Baby, A. (2018) Tensile and Flexural Properties of Chopped Strand E-glass Fibre Mat Reinforced CNSL-Epoxy Composites. MATEC Web of Conferences, 144(4), 02025.
Nuruzzaman, D. M., Iqbal, A. K. M. A., Oumer, A. N., Ismail, N. M. & Basri, S. (2016). Experimental investigation on the mechanical properties of glass fiber reinforced nylon. IOP Conf. Series: Materials Science and Engineering. 114, 1-7.
Omid, T., Venus, M. M., Sharafeddin, F. & Ashgar, A. A. (2012). Effect of glass fiber length on flexural strength of fiber-reinforced composite resin. World Journal of Dentistry. 3, 131-135.
Philips, L. N. (1989). Design with advanced composite materials. London: Springer Verlag.
Pizzi, A. (1994). Advanced wood adhesives technology. New York: Marcel Dekker.
Ripperger, W. (2005). Process for the Production of High Purity Melamine From Urea. US 6,858,730
Rosato, D. V. (1997). Designing with reinforced composites: technology, performance, economics. Munich: Hanser Verlag.
Sonsakul, K. & Boongsood, W. (2017). Effects of glass scraps powder and glass fiber on mechanical properties of polyester composites. IOP Conf. Series: Materials Science and Engineering. 273 (2017), 012006.
Soy, U. (2009). Metal Matrix Composite Materials. Technical Education Faculty of Sakarya University, Metal Education Department, Lecture Notes, Sakarya. Şahin, Y. (2000). Introduction to composite materials. (1st ed). Ankara: Gazi.
Trantina, G., & Mimmer, R. (1993). Structural analysis of thermoplastic components. New York: McGraw Hill.
Ulcay, Y., Gemci, R., & Akyol, M. (2002). Examining the effect of different cure methods on interfacial strength of fiber reinforced polymer matrix. Journal of Uludag University Engineering and Architecture. 7 (1), 93-116.
Valasek, P. & Müller, M. (2013) Polymeric composite based on glass powder - Usage possibilities in agrocomplex. Scientia Agriculturae Bohemica. 44(2), 107-112.
Wallenberger, F. T, Watson, J. C, & Li, H. (2001). Glass Fibers. In: Donaldson, S. L., & Miracle, D. B. (Eds), Composites, (pp 27-34). Novelty: ASM International Park.

Details

Primary Language

English

Subjects

Wearable Materials

Journal Section

Research Article

Authors

Hayriye Hale Aygün ^*
0000-0002-2812-8079
Türkiye

Publication Date

June 3, 2020

Submission Date

January 10, 2020

Acceptance Date

May 3, 2020

Published in Issue

Year 2020 Volume: 23 Number: 2

DOI

https://doi.org/10.17780/ksujes.673020

IZ

https://izlik.org/JA32EX68YA

Cite

RIS / Bibtex

APA

Aygün, H. H. (2020). MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 23(2), 60-69. https://doi.org/10.17780/ksujes.673020

AMA

1.Aygün HH. MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES. KSU J. Eng. Sci. 2020;23(2):60-69. doi:10.17780/ksujes.673020

Chicago

Aygün, Hayriye Hale. 2020. “MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 23 (2): 60-69. https://doi.org/10.17780/ksujes.673020.

EndNote

Aygün HH (June 1, 2020) MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 23 2 60–69.

IEEE

[1]H. H. Aygün, “MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES”, KSU J. Eng. Sci., vol. 23, no. 2, pp. 60–69, June 2020, doi: 10.17780/ksujes.673020.

ISNAD

Aygün, Hayriye Hale. “MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 23/2 (June 1, 2020): 60-69. https://doi.org/10.17780/ksujes.673020.

JAMA

1.Aygün HH. MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES. KSU J. Eng. Sci. 2020;23:60–69.

MLA

Aygün, Hayriye Hale. “MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, vol. 23, no. 2, June 2020, pp. 60-69, doi:10.17780/ksujes.673020.

Vancouver

1.Hayriye Hale Aygün. MECHANICAL PROPERTIES OF WASTE GLASS FIBER POWDER REINFORCED MELAMINE COMPOSITES. KSU J. Eng. Sci. 2020 Jun. 1;23(2):60-9. doi:10.17780/ksujes.673020