Araştırma Makalesi
Yıl 2017,
, 68 - 73, 25.08.2017
Öz
Kaynakça
- Aydin, I., Çolakoglu, G., Çolak, S., Demirkır, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood, Building and Environment, 41(10):1311–1316.
- Aydin, I., (2004). Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels, Applied Surface Science, 233(1-4):268–274.
- Bal B.C., Bektaş İ, Tutuş A, Kaymakçı A. (2011). The Within-Tree Variation in Some Physical Properties in Eucalyptus Grandis, Düzce Üniversitesi, Ormancılık Dergisi, 7:82–86.
- Bal, B.C., Bektaş, İ. Kaymakçi, A., (2012). Toros Sedirinde Genç Odun ve Olgun Odunun Bazı Fiziksel ve Mekanik Özellikleri, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 15(2):17–27.
- Bal, B.C., (2012). Genç odun ve olgun odunun lif morfolojisindeki farklılıklar üzerine bir araştırma, Düzce Üniversitesi Ormancılık Dergisi, 8(2):29–35.
- Bal, B.C., Bektaş, İ, (2012). The physical properties of heartwood and sapwood of Eucalyptus grandis, Pro Ligno, 8 (4):35-43.
- Bal, B.C., Bektaş, İ., (2013), Okaliptüs , kayın ve kavak soyma kaplamaları ile üretilen tabakalı kaplama kerestelerin (TKK) bazı fiziksel özellikleri, Artvin Çoruh üniversitesi, Orman fakültesi dergisi, 14(1):25–35.
- Bal BC, Özdemir F, Altuntaş E, 2013, Masif Ağaç Malzeme ve Tabakalı Kaplama Kerestenin Vida Tutma Direnci Üzerine Karşılaştırmalı Bir Çalışma, Düzce University Journal of Forestry, 9 (2):14-22.
- Bao, F.C. et al., (2001). Differences in wood properties between juvenile wood and mature wood in 10 species grown in China, Wood Science and Technology, 35(4):363–375.
- Biblis, E.J., (1985). Composıte plywood wıth southern pıne veneer faces and orıented strand core from sweetgum and southern pıne, Wood and Fiber Science, 17(1):47–57.
Screw and Nail-Holding Capacities of Combi Plywood Produced From Eucalyptus, Beech and Poplar Veneer
Öz
Combi plywood
(combination plywood) consists of plywood made of two or more veneer sheets
peeled from different species of wood. Combi
plywood has some advantages such as its low weight, low cost, satisfactory performance, and the availability of abundant raw
materials. In this study, five-ply combi plywood panels were produced from
eucalyptus, beech, and poplar using urea formaldehyde adhesive to combine
rotary-peeled veneer sheets. Three plywood groups were produced with different
combinations, and we investigated the screw withdrawal and nail holding
capacity of the combi plywood. In addition, we determined the air-dried density
and equilibrium moisture content of the plywood panels that were produced. The
test results were analyzed using the SPSS software program. We used the data that were obtained to
determine the combi plywood that provided the greatest screw and nail holding
capacities. In addition, we investigated the relationship between density and
fastener holding capacity.
Anahtar Kelimeler
Kaynakça
- Aydin, I., Çolakoglu, G., Çolak, S., Demirkır, C. (2006). Effects of moisture content on formaldehyde emission and mechanical properties of plywood, Building and Environment, 41(10):1311–1316.
- Aydin, I., (2004). Activation of wood surfaces for glue bonds by mechanical pre-treatment and its effects on some properties of veneer surfaces and plywood panels, Applied Surface Science, 233(1-4):268–274.
- Bal B.C., Bektaş İ, Tutuş A, Kaymakçı A. (2011). The Within-Tree Variation in Some Physical Properties in Eucalyptus Grandis, Düzce Üniversitesi, Ormancılık Dergisi, 7:82–86.
- Bal, B.C., Bektaş, İ. Kaymakçi, A., (2012). Toros Sedirinde Genç Odun ve Olgun Odunun Bazı Fiziksel ve Mekanik Özellikleri, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 15(2):17–27.
- Bal, B.C., (2012). Genç odun ve olgun odunun lif morfolojisindeki farklılıklar üzerine bir araştırma, Düzce Üniversitesi Ormancılık Dergisi, 8(2):29–35.
- Bal, B.C., Bektaş, İ, (2012). The physical properties of heartwood and sapwood of Eucalyptus grandis, Pro Ligno, 8 (4):35-43.
- Bal, B.C., Bektaş, İ., (2013), Okaliptüs , kayın ve kavak soyma kaplamaları ile üretilen tabakalı kaplama kerestelerin (TKK) bazı fiziksel özellikleri, Artvin Çoruh üniversitesi, Orman fakültesi dergisi, 14(1):25–35.
- Bal BC, Özdemir F, Altuntaş E, 2013, Masif Ağaç Malzeme ve Tabakalı Kaplama Kerestenin Vida Tutma Direnci Üzerine Karşılaştırmalı Bir Çalışma, Düzce University Journal of Forestry, 9 (2):14-22.
- Bao, F.C. et al., (2001). Differences in wood properties between juvenile wood and mature wood in 10 species grown in China, Wood Science and Technology, 35(4):363–375.
- Biblis, E.J., (1985). Composıte plywood wıth southern pıne veneer faces and orıented strand core from sweetgum and southern pıne, Wood and Fiber Science, 17(1):47–57.
Toplam 10 adet kaynakça vardır.
Ayrıntılar
| Konular | Mühendislik |
|---|---|
| Bölüm | Araştırma Makalesi |
| Yazarlar | |
| Yayımlanma Tarihi | 25 Ağustos 2017 |
| Gönderilme Tarihi | 4 Şubat 2017 |
| Yayımlandığı Sayı | Yıl 2017 |