KOMPOZİT BİR SİLİNDİR GÖMLEĞİNDE İKİ BOYUTLU SICAKLIK DAĞILIMIN SAYISAL İNCELENMESİ

Ali Yıldırım; Durmuş Yarımpabuç; Kerimcan Çelebi

doi:10.17780/ksujes.1377165

TR EN

KOMPOZİT BİR SİLİNDİR GÖMLEĞİNDE İKİ BOYUTLU SICAKLIK DAĞILIMIN SAYISAL İNCELENMESİ

Öz

Bu çalışmada sınırlarında sıcaklığın lineer değiştiği düşünülen alüminyum ve SiC’den oluşan kompozit bir silindir gömleğinde kararlı durumdaki iki boyutlu sıcaklık dağılımı pseudospektral Chebyshev yöntemi kullanılarak incelenmiştir. Sabit sıcaklık sınır koşulu altında iki boyutlu pseudospektral Chebyshev yöntemi kullanılarak elde edilen sayısal sonuçlar analitik çözümle karşılaştırılarak yöntemin doğruluğu gösterilmiştir. Silindir gömleğindeki sıcaklık dağılımlarının iki boyutlu ve üç boyutlu grafikleri verilmiş ve tartışılmıştır. Elde edilen sayısal sonuçlar, pseudospektral Chebyshev yönteminin bu tür problemlerin çözümlerinde alternatif olarak kullanılabileceği gösterilmiştir.

Anahtar Kelimeler

References

Arpaci, V. S. (1966). Conduction Heat Transfer, Addison-Wesley, Reading, MA.
Arslan, E., Mack, W., & Apatay, T. (2021), Thermo-mechanically loaded steel/aluminum fuctionally graded spherical containers and pressure vessels. Int. J. Press. Vessels Pip., 191, 104334. https://doi.org/10.1016/j.ijpvp.2021.104334
Bazan, F.S.V. (2008). Chebyshev Pseudospectral Method for Computing Numerical Solution of Convection-Diffusion Equation. Applied Mathematics and Computation, 200(2), 537-546. https://doi.org/10.1016/j.amc.2007.11.026
Bi, Y., Wang, P., Xiang, R., Wen, J., Lei, J., Shen, L., & Xin, Q. (2021). Numerical investigation on the operating characteristics of the cylinder liners of a turbocharged diesel engine. Sādhanā, 46, 1-14. https://doi.org/10.1007/s12046-021-01679-0
Callister Jr, W. D., & Rethwisch, D. G. (2009). Material science and engineering an introduction (8th edition). John Wiley & Sons.
Can, N., & Keles, I. (2023). A practical jointed approach to transient hyperbolic heat conduction of FGM cylinders and spheres. Journal of Mechanical Science and Technology, 37(3), 1223-1231. https://doi.org/10.1007/s12206-023-0209-z
Carslaw, H. S., & Jaeger, J. C. (1959). Conduction of Heat in Solids, (2nd edition). Oxford University Press, New York.
Firoozabadi, M. D., Shahbakhti, M., Koch, C.R., & Jazayeri, S.A. (2013). Thermodynamic control-oriented modeling of cycle-to-cycle exhaust gas temperature in an HCCI engine. Applied Energy, 110, 236–243. https://doi.org/10.1016/j.apenergy.2013.04.055

Eker, M., Yarımpabuç, D., Yıldırım, A., & Celebi K. (2021). Elastic Solutions Based On The Mori–Tanaka Scheme For Pressurized Functionally Graded Cylinder. Journal of Applied Mathematics and Computational Mechanics 19(4), 24–37. https://doi.org/10.17512/jamcm.2020.4.05
Ertek, C., & Civelek, F. (2020). Comparison of functionally graded and ungraded cylinder liners with finite element analysis. Cumhuriyet Science Journal, 41(2), 506–520. http://dx.doi.org/10.17776/csj.632197
Gibson, R.F. (2016). Principles of composite material mechanics (Fourth Edition). CRC Press, Boca Raton, Gottlieb, D. (1981). The Stability of Pseudospectral-Chebyshev Methods, Mathematics of Computation, 36(153), 107-118. ISSN 1088-6842 (online) ISSN 0025-5718 (print)
Gustof, P., & Hornik, A. (2008). Determination of the temperature distribution in the wet cylinder sleeve in turbo Diesel engine. Journal of Achievements in Materials and Manufacturing Engineering, 27(2), 159-162. http://jamme.acmsse.h2.pl/papers_vol27_2/27211.pdf
Halpin, J.C. (1969). Stiffness and expansion estimates for oriented short fiber composites. Journal of Composite Materials, 3(4), 732-734. https://doi.org/10.1177/002199836900300419
Heywood, J.B. (2008). Internal combustion engine Fundamentals (Second Edition). McGraw-Hill International Editions, London.
Halpin, J.C. (1992). Primer on Composite Materials Analysis Second Edition, Revised, CRC Press, Boca Raton, Florida. https://doi.org/10.1201/9780203742235
Holger, P., Worret, R., & Spicher, U. (2001, July). Numerical analyses of the combustion process in spark ignition engine. In The fifth international symposium on diagnostics and modelling of combustion in internal combustion engines, Nagaya.
Jacob, M. (1949). Heat Transfer, John Wiley and Sons, New York.
Kraus, A.D., Aziz, A., & Welty, J.R. (2001). Extended Surface Heat Transfer. John 155 Wiley and Sons, New York.
Lapuerta, M., Armas, O., & Bermúdez, V. (2000). Sensitivity of diesel engine thermodynamic cycle calculation to measurement errors and estimated parameters. Applied Thermal Engineering, 20(9), 843-861. https://doi.org/10.1016/S1359-4311(99)00069-1
MAHLE GmbH, (2016.). Cylinder Components Properties, applications, materials (Second Edition). Springer, Stuttgart, Germany.
Najibi, A., Alizadeh, P., & Ghazifard, P. (2021). Transient thermal stress analysis for a short thick hollow FGM cylinder with nonlinear temperature-dependent material properties. Journal of Thermal Analysis and Calorimetry, 1-12. https://doi.org/10.1007/s10973-020-10442-2
Rakopoulos, C. D., & Mavropoulos, G. C. (1998). Components heat transfer studies in a low heat rejection DI diesel engine using a hybrid thermostructural finite element model. Applied thermal engineering, 18(5), 301-316. https://doi.org/10.1016/S1359-4311(97)00055-0
Roy, S., Ganesh, N., Kumarasamy, A., & Viswanathan, P. (2020). Thermomechanical Analysis of a Cylindrical Liner. In Advances in Engineering Design and Simulation: Select Proceedings of NIRC 2018 (pp. 33-40). Springer Singapore. https://doi.org/10.1007/978-981-13-8468-4_3
Richardson, D. E. (2000). Review of power cylinder friction for diesel engines. J. Eng. Gas Turbines Power, 122(4), 506-519. https://doi.org/10.1115/1.1290592
Shariyat, M. (2012). Nonlinear transient stress and wave propagation analyses of the FGM thick cylinders, employing a unified generalized thermoelasticity theory, International Journal of Mechanical Sciences, 65(1), 57–68. https://doi.org/10.1016/j.ijmecsci.2012.09.001
Shojaeefard, M. H., & Najibi, A. (2014a). Nonlinear transient heat conduction analysis of hollow thick temperature-dependent 2D-FGM cylinders with finite length using numerical method. Journal of Mechanical Science and Technology, 28, 3825-3835. https://doi.org/10.1007/s12206-014-0846-3
Shojaeefard, M. H., & Najibi, A. (2014b). Nonlinear transient heat conduction analysis for a thick hollow 2D-FGM cylinder with finite length. Arabian Journal for Science and Engineering, 39, 9001-9014. https://doi.org/10.1007/s13369-014-1403-1
Timoshenko, S.P., & Goodier, J.N. (1970) Theory of Elasticity. McGraw-Hili, New York. Trefethen, L.N. (2000). Spectral Methods in Matlab. SIAM, Philadelphia, PA.
Trung, K. N. (2021a). The temperature distribution of the wet cylinder liner of V-12 engine according to calculation and experiment. Journal of Thermal Engineering, 7(Supp 14), 1872-1884. https://doi.org/10.18186/thermal.1051265
Trung, K. N. (2021b). Effect of heat transfer correlation on wet cylinder liner temperature distribution when converting an old engine into a turbocharged engine. Archives of Thermodynamics, 42(3). https://doi.org/10.24425/ather.2021.138114
Trung, K. N., & Trong, Q. N. (2022). The Cylinder Liner Temperature Distribution Evaluation of a Diesel Engine Operating with M10, E10, and B10 Fuels. International Journal of Heat & Technology, 40(1). https://doi.org/10.18280/ijht.400133
Yamagata, H. (2005). The science and technology of materials in automotive engines. Elsevier.
Vignoli, L. L., Savi, M. A., Pacheco, P. M., & Kalamkarov, A. L. (2019). Comparative analysis of micromechanical models for the elastic composite laminae. Composites Part B: Engineering, 174, 106961. https://doi.org/10.1016/j.compositesb.2019.106961
Wang, G. X., Chen, H. B., Yuan, Z. C., & Lu, W. (2012). Numerical Study on Three-Dimensional Steady-State Temperature Field of a Gasoline Engine. Advanced Materials Research, 569, 610-614. https://doi.org/10.4028/www.scientific.net/AMR.569.610
Wang, X., & Stone, C. R. (2008). A study of combustion, instantaneous heat transfer, and emissions in a spark ignition engine during warm-up. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 222(4), 607-618. https://doi.org/10.1243/09544070JAUTO610

Details

Primary Language

Turkish

Subjects

Solid Mechanics

Journal Section

Research Article

Authors

Ali Yıldırım ^*
0000-0001-6567-774X
Türkiye

Durmuş Yarımpabuç
0000-0002-8763-1125
Türkiye

Kerimcan Çelebi
0000-0001-6294-0872
Türkiye

Publication Date

March 3, 2024

Submission Date

October 17, 2023

Acceptance Date

November 16, 2023

Published in Issue

Year 1970 Volume: 27 Number: 1

DOI

https://doi.org/10.17780/ksujes.1377165

IZ

https://izlik.org/JA22GN38JA

Cite

RIS / Bibtex

APA

Yıldırım, A., Yarımpabuç, D., & Çelebi, K. (2024). KOMPOZİT BİR SİLİNDİR GÖMLEĞİNDE İKİ BOYUTLU SICAKLIK DAĞILIMIN SAYISAL İNCELENMESİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 27(1), 256-268. https://doi.org/10.17780/ksujes.1377165

NUMERICAL INVESTIGATION OF TWO DIMENSIONAL TEMPERATURE DISTRIBUTION OF A COMPOSITE CYLINDER LINER

KOMPOZİT BİR SİLİNDİR GÖMLEĞİNDE İKİ BOYUTLU SICAKLIK DAĞILIMIN SAYISAL İNCELENMESİ

Öz

Anahtar Kelimeler

NUMERICAL INVESTIGATION OF TWO DIMENSIONAL TEMPERATURE DISTRIBUTION OF A COMPOSITE CYLINDER LINER

Abstract

Keywords

References

Details

Primary Language

Subjects

Journal Section

Authors

Publication Date

Submission Date

Acceptance Date

Published in Issue

DOI

IZ

Cite