Yapısal
elemanların Karbon Fiber Takviyeli Polimer (CFRP) malzemelerle güçlendirilmesi
kolay ve hızlı olmasından dolayı etkin bir yöntem olarak kabul edilmektedir.
Betonarme kirişlerin çekme yüzeylerine farklı malzemeler ile güçlendirme
uygulamaları yaygın olarak yapılmaktadır.
Bu deneysel çalışmada, 28 günlük basınç dayanım değeri 30 MPa olan
150x150x150 mm’lik küp ve 100x100x500 mm’lik beton kirişler üretilmiştir.
Üretilen küp beton numunelerinin yan yüzeylerine tek doğrultulu, farklı
şekillerde yapıştırılan CFRP şeritler ile 6 tip numune oluşturulmuştur. Ayrıca
kirişlerin çekme yüzeylerinin merkezlerine CFRP şeritleri 50-75 mm genişliğinde
ve 50, 150, 300 ve 450 mm uzunluklarında hazırlanan numuneler Sikadur 330 ile
yapıştırılıp kirişler güçlendirilmiştir. Üretilen küp numuneler tek eksenli
basınç testine, kiriş numuneleri ise dört nokta eğilme testine tabii
tutulmuştur. Elde edilen sonuçlar birbirileriyle karşılaştırılmıştır.
Strengthening structural members with Carbon Fiber
Reinforced Polymer (CFRP) is considered an effective method because of easy and
fast technique. Reinforcement implements of reinforced concrete beams to the
tensile faces are use different materials widely. In this experimental study,
150x150x150 mm concrete cube and 100x100x500 mm concrete beam specimens were
produced with compressive strength of 30 MPa for 28 days. Six types of
specimens were produced different adhering CFRP strips to the side surfaces of
produced cube concrete samples in one direction. In addition, beams were
strengthened with 50-75 mm widths and 50, 150, 300 and 450 mm lengths CFRP
strips by using Sikadur 330 adhesive. The cube specimens and beam specimens
were subjected to the pressure test and the four point bending test
respectively. The obtained results are compared with each other.
Subjects | Civil Engineering |
---|---|
Journal Section | Research Articles |
Authors | |
Publication Date | October 30, 2017 |
Submission Date | August 11, 2017 |
Published in Issue | Year 2017Volume: 20 Issue: 3 |