FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ

Ajmal Chopan; Ahmad Reshad Noorı

doi:10.17780/ksujes.1320945

TR EN

FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ

Öz

Bu çalışmada, fonksiyonel derecelendirilmiş gözenekli malzemeden yapılmış sandviç kirişlerin elastik ve viskoelastik zorlanmış titreşim davranışı teorik olarak incelenmiştir. Üç tabakadan oluşan sandviç kirişin alt ve üst katmanı izotropik homojen ve çekirdek tabakası ise gözenekli malzemeli olarak modellenmiştir. Modellenen kirişlerin sonlu elemanlar metodu ile analiz edilebilmesi için ANSYS programı kullanılmıştır. Ele alınan yapı elemanlarının sonlu eleman modellerinin kurulması için birinci mertebeden kayma deformasyon etkisine dayalı BEAM189 elemanı kullanılmıştır. Kirişin kesit özelliklerinin üniform olduğu varsayılmıştır. Analizlerde simetrik, üniform ve monolitik olmak üzere üç çeşit gözenek fonksiyonundan faydalanmıştır. Kesit kalınlığı boyunca elastiste modülü ve yoğunluk değişken olarak, Poison oranı ise sabit olarak alınmıştır. Kirişler ankastre – ankastre, ankastre – sabit, sabit – sabit ve ankastre – serbest olarak modellenmiştir. Malzeme değişim katsayısının, malzeme değişim fonksiyonun, çeşitli sınır koşullarının ve sönüm katsayılarının dinamik analiz üzerindeki etkileri detaylı bir şekilde araştırılmıştır. Bu çalışmadan elde edilen sonuçlara göre malzeme gözenek fonksiyonu ve malzeme değişim katsayıları dinamik analizin sonuçlarından genlik ve periyot değerlerini önemli ölçüde etkilediği görülmüştür. Viskoelastik durumunda sönüm oranı arttıkça genlik değerlerinin daha hızlı bir şekilde küçüldüğü gözlemlenmiştir.

Anahtar Kelimeler

FORCED VIBRATION ANALYSIS OF FUNCTIONALLY GRADED POROUS SANDWICH BEAMS

Öz

In this paper, the elastic and viscoelastic forced vibration behavior of sandwich beams made of functionally graded porous material is investigated theoretically. The bottom and top layers of the sandwich beam consisting of three layers are modeled as isotropic homogeneous and the core layer is modeled as porous material. ANSYS software is used to analyze the modeled beams by the finite element method. BEAM189 element which is based on the first-order shear deformation effect is used to generate the finite element models of the considered structural elements. The cross-sectional properties of the beam are assumed to be uniform. Three types of porosity functions are used in the analysis: symmetric, uniform, and monolithic. The modulus of elasticity and density are taken as variables along the section thickness and the poison ratio is taken as constant. The beams are modeled as clamped-clamped, clamped - pinned, pinned - pinned, and clamped - free. The effects of material variation coefficient, material functions, various boundary conditions, and damping coefficients on the dynamic analysis are investigated in detail. Based on the results obtained from this study, it has been seen that the material function and material distribution coefficients significantly affect the amplitude and period values of the results of dynamic analysis. In the viscoelastic case, it is observed that as the damping ratio increases, the amplitude values decrease more rapidly.

Anahtar Kelimeler

Kaynakça

Ai, Q., & Weaver, P. M. (2016). Simplified analytical model for tapered sandwich beams using variable stiffness materials. Journal of Sandwich Structures & Materials, 19(1), 3-25.‏ https://doi.org/10.1177/1099636215619775
Ait Atmane H., Tounsi A., & Bernard, F. (2017). Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations. International Journal of Mechanics and Materials in Design, 13, 71-84.‏ https://doi.org/10.1007/s10999-015-9318-x
Akbas Ş. D. (2015). Free vibration and bending of functionally graded beams resting on elastic foundation. Res. Eng. Struct. Mat., vol. 1, no. 1, pp. 25–37, 2015. http://dx.doi.org/10.17515/resm2015.03st0107
Akbaş, Ş. D. (2018). Forced vibration analysis of functionally graded porous deep beams. Composite Structures, 186, 293-302.‏ https://doi.org/10.1016/j.compstruct.2017.12.013
Al Rjoub, Y.S., & Hamad, A.G(2017). Free vibration of functionally Euler-Bernoulli and Timoshenko graded porous beams using the transfer matrix method. KSCE J. Civ. Eng. 21, 792–806. https://doi.org/10.1007/s12205-016-0149-6
Al-Itbı, S. K., & Noori, A. R. (2022). Influence of porosity on the free vibration response of sandwich functionally graded porous beams. Journal of Sustainable Construction Materials and Technologies, 7(4). https://doi.org/10.47481/jscmt.1165940
Alshorbagy E.A. , Eltaher A.M., & Mahmoud F. F. (2011) Free vibration characteristics of a functionally graded beam by finite element method, Appl. Math. Model, vol. 35, no. 1, pp. 412–425. https://doi.org/10.1016/j.apm.2010.07.006
Amirani, M. C., Khalili, S. M. R., & Nemati, N. (2009). Free vibration analysis of sandwich beam with FG core using the element free Galerkin method. Composite structures, 90(3), 373-379.‏ https://doi.org/10.1016/j.compstruct.2009.03.023

Aydogdu M. (2008). Semi-inverse method for vibration and buckling of axially functionally graded beams. J. Reinf. Plast.Compos., vol. 27, no. 7, pp. 683–691. https://doi.org/10.1177/0731684407081369
Aydogdu M., & Taskin V. (2007). Free vibration analysis of functionally graded beams with simply supported edges. Mater. Des., vol. 28, no. 5, pp. 1651–1656. https://doi.org/10.1016/j.matdes.2006.02.007
Aydogdu M., Maroti G., & Elishakoff I. (2013). A note on semiinverse method for buckling of axially functionally graded beams. J. Reinf. Plast.Compos., vol. 32, no. 7, pp. 511–512. https://doi.org/10.1177/0731684412474999
Bhangale R. K., & Ganesan N. (2006). Thermoelastic buckling and vibration behavior of a functionally graded sandwich beam with constrained viscoelastic core. J. Sound Vib., vol. 295, no. 1–2, pp. 294–316.
Celebi K., & Tutuncu N. (2014). Free vibration analysis of functionally graded beams using an exact plane elasticity approach. Proc. IMechE Part C: J. Mech. Eng. Sci., vol. 228, no. 14, pp. 2488–2494. https://doi.org/10.1177/0954406213519974
Chen D, Yang J, Kitipornchai S. (2019). Buckling and bending analyses of a novel functionally graded porous plate using Chebyshev-Ritz method. Archives of Civil and Mechanical Engineering ;19(1):157-170. https://doi.org/10.1016/j.acme.2018.09.004
Chen, D., Kitipornchai, S., & Yang, J. (2016). Nonlinear free vibration of shear deformable sandwich beam with a functionally graded porous core. Thin-Walled Structures, 107, 39-48.‏ https://doi.org/10.1016/j.tws.2016.05.025
Chu P., X.F. Li, Wu J.X., & Lee K.Y. (2015). Two-dimensional elasticity solution of elastic strips and beams made of functionally graded materials under tension and bending, Acta Mech. vol. 226, no. 7, pp. 2235–2253. https://doi.org/10.1007/s00707-014-1294-y
Daikh, A.A., & Zenkour, A.M. (2019). Free vibration and buckling of porous power-law and sigmoid functionally graded sandwich plates using a simple higher-order shear deformation theory. Materials Research Express. 6(11):115707. https://doi.org/10.1088/2053-1591/ab48a9
Daouadji T. H., Henni A. H., Tounsi A., & El Abbes A. B. (2013). Elasticity solution of a cantilever functionally graded beam. Appl. Compos. Mater., vol. 20, no. 1, pp. 1–15. https://doi.org/10.1007/s10443-011-9243-6
Das, S., & Sarangi, S. K. (2016, September). Static analysis of functionally graded composite beams. In IOP Conference Series: Materials Science and Engineering (Vol. 149, No. 1, p. 012138). IOP Publishing. https://doi.org/10.1088/1757-899X/149/1/012138
Ding, D.H., Huang, D.J., & Chen, W.Q. (2007). Elasticity solutions for plane anisotropic functionally graded beams. Int. J. Solids Struct., vol. 44, no. 1, pp. 176–196. https://doi.org/10.1016/j.ijsolstr.2006.04.026
Ebrahimi, F., Ghasemi, F., & Salari, E. (2016). Investigating thermal effects on vibration behavior of temperature-dependent compositionally graded Euler beams with porosities. Meccanica 51, 223–249. https://doi.org/10.1007/s11012-015-0208-y
Fouaidi, M., Jamal, M., & Belouaggadia N. (2020). Nonlinear bending analysis of functionally graded porous beams using the multiquadric radial basis functions and a Taylor series-based continuation procedure. Composite Structures, 252:112593. https://doi.org/10.1016/j.compstruct.2020.112593
Gao, K., Li, R., & Yang, J. (2019). Dynamic characteristics of functionally graded porous beams with interval material properties. Eng. Struct. 197, 109441. https://doi.org/10.1016/j.engstruct.2019.109441
Huang D.J., Ding D.H., & Chen W.Q.. (2007). Analytical solution for functionally graded anisotropic cantilever beam subjected to linearly distributed load. Appl. Math. Mech., vol. 28, no. 7, pp. 855– 860. https://doi.org/10.1016/j.ijsolstr.2006.04.026
Huang, D.J. Ding, D.H., & Chen. W.Q. (2009) . Analytical solution and semi-analytical solution for anisotropic functionally graded beam subject to arbitrary loading. Sci. China Phys. Mech. Astron., vol. 52, no. 8, pp. 1244–1256. https://doi.org/10.1007/s11433-009-0152-8
Jabbari M., Mojahedin A., Khorshidvand A.R., & Eslami M.R. (2014). Buckling Analysis of a Functionally Graded Thin Circular Plate Made of Saturated Porous Materials. Journal of Engineering Mechanics,140(2):287-295. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000663
Jamshidi M, Arghavani J, & Maboudi G. (2019). Post-buckling optimization of two-dimensional functionally graded porous beams. International Journal of Mechanics and Materials in Design,15(4):801-815. https://doi.org/10.1007/s10999-019-09443-3
Kiani Y., & Eslami M. R. (2010). Thermal buckling analysis of functionally graded material beams. Int. J. Mech. Mater. Des., vol. 6, no. 3, pp. 229–238. https://doi.org/10.1007/s10999-010-9132-4
Kiani Y., & Eslami M. R. (2013). Thermomechanical buckling of temperature dependent FGM beams. Lat. Am. J. Solids Struct., vol. 10, no. 2, pp. 223–246. https://doi.org/10.1590/S1679-78252013000200001
Kim N., & Lee J. (2016). Theory of thin-walled functionally graded sandwich beams with single, and double-cell sections. Compos. Struct., vol. 157, pp. 141–154. https://doi.org/10.1016/j.compstruct.2016.07.024
Kim N., & Lee J. (2017). Flexural-torsional analysis of functionally graded sandwich I-beams considering shear effects. Compos. Part B-Eng., vol. 108, pp. 436–450. https://doi.org/10.1016/j.compositesb.2016.09.092
Liu Z., Yang C., Gao W., Wu D., & Li G. (2019). Nonlinear behaviour and stability of functionally graded porous arches with graphene platelets reinforcements. International Journal of Engineering Science, 137:37-56. https://doi.org/10.1016/j.ijengsci.2018.12.003
Mojahedin A., Jabbari M., Khorshidvand A.R., & Eslami M.R. (2016). Buckling analysis of functionally graded circular plates made of saturated porous materials based on higher order shear deformation theory. Thin-Walled Structures; 99:83-90. https://doi.org/10.1016/j.tws.2015.11.008
Naderi A., & Saidi. A.R. (2013). Bending–stretching analysis of moderately thick functionally graded anisotropic wide beams. Arch. Appl. Mech., vol. 83, no. 9, pp. 1359–1370. https://doi.org/10.1007/s00419-013-0751-8
Njim, E. K., Bakhi, S. H., & Al-Waily, M. (2022). Experimental and numerical flexural properties of sandwich structure with functionally graded porous materials. Engineering and Technology Journal, 40(01), 137-147.‏ https://doi.org/10.30684/etj.v40i1.2184
Noori, A. R., Aslan, T. A., & Temel, B. (2018). Damped transient response of in-plane and out-of-plane loaded stepped curved rods. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40, 1-25. https://doi.org/10.1007/s40430-017-0949-8
Noori A. R., Rasooli H., Aslan T. A., & Temel B. (2020). Fonksiyonel derecelenmiş sandviç kirişlerin tamamlayıcı fonksiyonlar yöntemi ile statik analizi. Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 35(4), 1091-1102.‏ https://doi.org/10.21605/cukurovaummfd.869180
Noori, A. R., Aslan, T. A., & Temel, B. (2020). Static analysis of FG beams via complementary functions method. European Mechanical Science, 4(1), 1-6.‏ https://doi.org/10.26701/ems.590864
Rezaiee-Pajand, M., Masoodi, A. R., & Mokhtari, M. (2018). Static analysis of functionally graded non-prismatic sandwich beams. Adv. Comput. Des, 3(2), 165-190.‏ https://doi.org/10.12989/acd.2018.3.2.165
Sankar, B. V. (2001). An elasticity solution for functionally graded beams. Compos. Sci. Technol., vol. 61, no. 5, pp. 689–696. https://doi.org/10.1016/S0266-3538(01)00007-0
Srikarun, B., Songsuwan, W., & Wattanasakulpong, N. (2021). Linear and nonlinear static bending of sandwich beams with functionally graded porous core under different distributed loads. Composite Structures, 276, 114538. https://doi.org/10.1016/j.compstruct.2021.114538
Su J., Xiang Y., Ke L-L., & Wang Y-S. (2019). Surface effect on static bending of functionally graded porous nanobeams based on Reddy’s Beam Theory. International Journal of Structural Stability and Dynamics. 19(06):1950062 https://doi.org/10.1142/S0219455419500627
Şimşek M., & Al-Shujairi M. (2017) Static, free and forced vibration of functionally graded (FG) sandwich beams excited by two successive moving harmonic loads. Compos. Part B-Eng., vol. 108, pp. 18–34, 2017. https://doi.org/10.1016/j.compositesb.2016.09.098
Turan, M. (2022). Fonksiyonel derecelendirilmiş gözenekli kirişlerin sonlu elemanlar yöntemiyle statik analizi. Mühendislik Bilimleri ve Tasarım Dergisi, 10(4), 1362-1374. https://doi.org/10.21923/jesd.1134356
Turan, M., & Adiyaman, G. (2023). Free vibration and buckling analysis of porous two-directional functionally graded beams using a higher-order finite element model. Journal of Vibration Engineering & Technologies, 1-20. https://doi.org/10.1007/s42417-023-00898-5
Turan M., & Kahya V. (2021). Free vibration and buckling analysis of functionally graded sandwich beams by Navier’s method. J. Fac. Eng. Archit. Gazi Univ. 36, 743–75. https://doi.org/10.17341/gazimmfd.599928
Turan, M., Uzun Yaylacı, E., & Yaylacı, M. (2023). Free vibration and buckling of functionally graded porous beams using analytical, finite element, and artificial neural network methods. Archive of Applied Mechanics, 93(4), 1351-1372. https://doi.org/10.1007/s00419-022-02332-w
Venkataraman S., & Sankar B.V. (2003). Elasticity solution for stresses in a sandwich beam with functionally graded core, AIAA J., vol. 41, no. 12, pp. 2501–2505. https://doi.org/10.2514/2.6853
Vo T. P., Thai H. T., Nguyen T. K. & Inam F. (2014). Static and vibration analysis of functionally graded beams using refined shear deformation theory. Meccanica, 49, 155-168.‏ https://doi.org/10.1007/s11012-013-9780-1
Wattanasakulpong N., & Chaikittiratana A. (2015). Flexural vibration of imperfect functionally graded beams based on Timoshenko beam theory: Chebyshev collocation method. Meccanica 50, 1331–1342. https://doi.org/10.1007/s11012-014-0094-8
Wattanasakulpong, N., & Eiadtrong, S. (2022). Transient Responses of Sandwich Plates with a Functionally Graded Porous Core: Jacobi–Ritz Method. International Journal of Structural Stability and Dynamics, 2350039. https://doi.org/10.1142/S0219455423500396
Xu Y., Yu T., & Zhou D., Two-dimensional elasticity solution for bending of functionally graded beams with variable thickness. Meccanica, vol. 49, no. 10, pp. 2479–2489, 2014. https://doi.org/10.1007/s11012-014-9958-1
Ying J., Lu C.F., & Chen W.Q.. (2008). Two-dimensional elasticity solutions for functionally graded beams resting on elastic foundations. Compos. Struct., vol. 84, no. 3, pp. 209–219. https://doi.org/10.1016/j.compstruct.2007.07.004
Zhao, J., Wang, Q., Deng, X., Choe, K., Xie, F., & Shuai, C. (2019). A modified series solution for free vibration analyses of moderately thick functionally graded porous (FGP) deep curved and straight beams. Composites Part B: Engineering, 165, 155-166.‏ https://doi.org/10.1016/j.compositesb.2018.11.080
Zhong Z., & Yu T. (2007). Analytical solution of a cantilever functionally graded beam. Compos. Sci. Technol., vol. 67, no. 3–4, pp. 481–488, 2007. https://doi.org/10.1016/j.compscitech.2006.08.023

Ayrıntılar

Birincil Dil

Türkçe

Konular

İnşaat Mühendisliğinde Sayısal Modelleme, Yapı Dinamiği

Bölüm

Araştırma Makalesi

Yazarlar

Ajmal Chopan
0009-0000-8718-4321
Türkiye

Ahmad Reshad Noorı ^*
0000-0001-6232-6303
Türkiye

Yayımlanma Tarihi

3 Aralık 2023

Gönderilme Tarihi

29 Haziran 2023

Kabul Tarihi

21 Ekim 2023

Yayımlandığı Sayı

Yıl 2023 Cilt: 26 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.1320945

IZ

https://izlik.org/JA74KB94BH

Kaynak Göster

RIS / Bibtex

APA

Chopan, A., & Noorı, A. R. (2023). FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 26(4), 909-921. https://doi.org/10.17780/ksujes.1320945

AMA

1.Chopan A, Noorı AR. FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2023;26(4):909-921. doi:10.17780/ksujes.1320945

Chicago

Chopan, Ajmal, ve Ahmad Reshad Noorı. 2023. “FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 26 (4): 909-21. https://doi.org/10.17780/ksujes.1320945.

EndNote

Chopan A, Noorı AR (01 Aralık 2023) FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 26 4 909–921.

IEEE

[1]A. Chopan ve A. R. Noorı, “FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ”, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 26, sy 4, ss. 909–921, Ara. 2023, doi: 10.17780/ksujes.1320945.

ISNAD

Chopan, Ajmal - Noorı, Ahmad Reshad. “FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 26/4 (01 Aralık 2023): 909-921. https://doi.org/10.17780/ksujes.1320945.

JAMA

1.Chopan A, Noorı AR. FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2023;26:909–921.

MLA

Chopan, Ajmal, ve Ahmad Reshad Noorı. “FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 26, sy 4, Aralık 2023, ss. 909-21, doi:10.17780/ksujes.1320945.

Vancouver

1.Ajmal Chopan, Ahmad Reshad Noorı. FONKSİYONEL DERECELENDİRİLMİŞ GÖZENEKLİ SANDVİÇ KİRİŞLERİN ZORLANMIŞ TİTREŞİM ANALİZİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 01 Aralık 2023;26(4):909-21. doi:10.17780/ksujes.1320945

Cited By

Gözenekliliğin Fonksiyonel Derecelendirilmiş Kirişlerin Serbest Titreşimleri Üzerinde Etkisi

Karadeniz Fen Bilimleri Dergisi

https://doi.org/10.31466/kfbd.1451491