PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS

Nazime Seyrek Kurban; Osman Babaarslan

doi:10.17780/ksujes.1343087

TR EN

PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS

Öz

Customers nowadays demand that their clothes be comfortable and suitable for their health in addition to the aesthetic features of the clothes they wear. Therefore, manufacturers following technological innovations to test their product capability are putting those devices on the market to measure the impact on health. The study describes the design, development, and prototype manufacturing stages of a new pressure measurement test device for measuring the pressure resulting from the interaction of human legs and stretch garments. The device can bend from the knee and move dynamically which has innovative aspects compared to the ones commercially available. After mass production of the device, it might be possible to measure the pressure levels of the garments to the human body, therefore, the effects of the fabrics on blood pressure in addition to body physiology can be evaluated with concrete values.

Anahtar Kelimeler

Destekleyen Kurum

This study was financially supported by the “Turkish Science and Technology Research Council (TÜBİTAK)” with National PhD Fellowship Programme BİDEB 2211-D and Çukurova University Scientific Research Projects Unit as PhD Thesis Project with FDK 2016-6917

Proje Numarası

FDK 2016-6917

Teşekkür

This study was financially supported by the “Turkish Science and Technology Research Council (TÜBİTAK)” with National PhD Fellowship Programme BİDEB 2211-D and Cukurova University Scientific Research Projects Unit as PhD Thesis Project with FDK 2016-6917. The authors would like to thank CALIK DENİM Textile Company/ its employees and Recep YILMAZ for their contribution to the manufacturing of the pressure measurement tester.

Kaynakça

Cansunar H.E. (2014) A Research On Medical Compression Stocking (MCS). MSc Thesis, Pamukkale University Instıtute of Natural and Applied Sciences, Denizli, TURKEY, 56 pages (Thesis No: 376223)
Fılodoro Calze Spa. (2001) EP 1 118 851 A2 A device for measuring the compression that can be exerted by a hosiery article. Europe Patent
Güney,S. & Kaplan, S. (2016) Parameters Affecting Pressure Comfort Performance And Measurement Of Pressure Comfort. Journal of Textiles and Engineer, 23 (102), 153-163.
Hohenstein Institute, HOSY Compression Measurement System Hohenstein. Retrieved from https://www.hohenstein.us/en-us/expertise/functionality/compression/ (accessed May 2023)
Kuenzli, D.; Braun,W.; Ruettiger,M. (2007) US 2007/0012120 Apparatus For The Testing Of Elastic Textile Leg Garments. United States Patent.
Oğlakcıoğlu, N. (2009) A Research on Compression and Comfort Properties of Medical Stockings. Ph.D. Thesis, Ege University Instıtute of Natural and Applied Sciences, Izmir, TURKEY, 69 pages (Thesis No: 255746)
Oğlakcıoğlu N. & Marmaralı A. (2010) TP 2010/01394 Çoraplar için basınç ölçüm cihazı. Turkish Utility Patent. Pohlen, E. Classification of compression stockings. Retrieved from http://www.tagungsmanagement.org/icc/images/stories/PDF/pressureranges.pdf (accessed August 2023).
RAL-GZ 387/1 Medical Compression Hosiery. (2008). RAL Deutsches Institut für Gütesicherung und Kennzeichnung e.V, Siegburger-Straße 39 53757, Sankt Augustin, GERMANY, Retrieved from www.RAL.de

Seyrek Kurban, N. (2017, April) Sportswear Regulating Blood Flow. In Proceedings, UTIB Turkish Textile and Clothing Sector IX. International R&D Brokerage Event (pp 354-355). Bursa, TURKEY.
Seyrek Kurban, N. (2019) Development of Super Stretch Denim Fabrics and Manufacture of A New Test Device For Measuring the Pressure to Be Applied In The Body. Ph.D. Thesis, Cukurova University Instıtute of Natural and Applied Sciences, Adana, TURKEY, 204 pages (Thesis No: 609194)
Seyrek Kurban, N. & Babaarslan O. (2017, October) An Experimental Study on the Determination of Pressure Values Applied to Human Body by Denim Trousers Created in Different Sizes. In Proceedings. 2nd International Mediterranean Science and Engineering Congress IMSEC2017 (pp 25-27). Adana, TURKEY.
Seyrek Kurban, N.; Babaarslan, O.; Yılmaz, R.; Calık Denim Tekstil San.Tic. A.Ş. (2016) TP2016/03486 Konvansiyonel ve Teknik Tekstil Ürünleri İçin Yeni Bir Basınç Ölçüm Test Cihazı. Turkish Patent.
Seyrek Kurban, N.; Babaarslan, O.; Yılmaz, R.; Calık Denim Tekstil San.Tic. A.Ş. (2017) WO/2017/160255 A Novel Pressure Measuring Test Apparatus For Conventional And Technical Textile Products. PCT Patent. SWISSLASTIC AG ST. GALLEN, MST MK IV Retrieved from http://www.swisslastic.ch/files/MST-MK-IV.pdf (accessed May 2023).
SWISSLASTIC AG ST. GALLEN, MST MK V, Retrieved from https://www.swisslastic.ch/en/products/pressure-measuring-devices/mst-mk-iv-17 (accessed May 2023).
SWISSLASTIC AG ST. GALLEN, MST Professional-2, Retrieved from https://www.swisslastic.ch/en/products/pressure-measuring-devices/mst-professional- 2 - 18/ (accessed May 2023).
SWISSLASTIC AG ST. GALLEN, MST MPT-4/MPT-7, Retrieved from https://www.swisslastic.ch/en/products/pressure-measuring-devices/mst-mpt-4/-mpt-7-33 (accessed May 2023).
TS ENV 12718: Medical Compression Hosiery, TSE Turkish Standards Institution, (2006) www.tse.org.tr
TS ENV 12719: Medical Thrombosis Prophylaxis Hoisery. TSE Turkish Standards Institution (2007) www.tse.org.tr TSE CEN/TR 15831: Method for Testing Compression in Medical Hosiery. TSE Turkish Standards Institution (2010) www.tse.org.tr
Yıldız Varan N. (2012) Development of Novel Elastomeric Fabrics for Burn Pressure Garments Using Various Antimicrobial Technologies. Ph.D. Thesis, Istanbul Technical University Instıtute of Natural and Applied Sciences, Istanbul, TURKEY, 145 pages. (Thesis No: 335752)
Wang Y, Cui Y, Zhang P, Feng X, Shen J & Xiong Q. (2011) A smart mannequin system for the pressure performance evaluation of compression garments, Textile Research Journal 81 (11), 1113-1123.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Tekstil Kalite Kontrolü, Tekstil Bilimleri ve Mühendisliği (Diğer)

Bölüm

Araştırma Makalesi

Yazarlar

Nazime Seyrek Kurban ^*
0000-0001-7419-7211
Türkiye

Osman Babaarslan
0000-0002-1606-3431
Türkiye

Yayımlanma Tarihi

3 Aralık 2024

Gönderilme Tarihi

14 Ağustos 2023

Kabul Tarihi

10 Eylül 2024

Yayımlandığı Sayı

Yıl 2024 Cilt: 27 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.1343087

IZ

https://izlik.org/JA86EL86PB

Kaynak Göster

RIS / Bibtex

APA

Seyrek Kurban, N., & Babaarslan, O. (2024). PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 27(4), 1162-1172. https://doi.org/10.17780/ksujes.1343087

AMA

1.Seyrek Kurban N, Babaarslan O. PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2024;27(4):1162-1172. doi:10.17780/ksujes.1343087

Chicago

Seyrek Kurban, Nazime, ve Osman Babaarslan. 2024. “PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 27 (4): 1162-72. https://doi.org/10.17780/ksujes.1343087.

EndNote

Seyrek Kurban N, Babaarslan O (01 Aralık 2024) PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 27 4 1162–1172.

IEEE

[1]N. Seyrek Kurban ve O. Babaarslan, “PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS”, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 27, sy 4, ss. 1162–1172, Ara. 2024, doi: 10.17780/ksujes.1343087.

ISNAD

Seyrek Kurban, Nazime - Babaarslan, Osman. “PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 27/4 (01 Aralık 2024): 1162-1172. https://doi.org/10.17780/ksujes.1343087.

JAMA

1.Seyrek Kurban N, Babaarslan O. PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2024;27:1162–1172.

MLA

Seyrek Kurban, Nazime, ve Osman Babaarslan. “PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 27, sy 4, Aralık 2024, ss. 1162-7, doi:10.17780/ksujes.1343087.

Vancouver

1.Nazime Seyrek Kurban, Osman Babaarslan. PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 01 Aralık 2024;27(4):1162-7. doi:10.17780/ksujes.1343087

Cited By

Thin Encapsulated Flexible Pressure Sensor Suitable for Clothing Pressure Sensing Manikin

IEEE Sensors Journal

https://doi.org/10.1109/JSEN.2025.3627275

MEDİKAL VE TEKSTİL UYGULAMALARINA YÖNELİK YENİ BİR DİNAMİK TABANLI BASINÇ ÖLÇÜM TEST CİHAZININ PROTOTİP İMALATI

Öz

Anahtar Kelimeler

PROTOTYPE MANUFACTURING OF A NEW DYNAMIC-BASED PRESSURE MEASUREMENT TEST DEVICE FOR MEDICAL AND TEXTILE APPLICATIONS

Öz

Anahtar Kelimeler

Destekleyen Kurum

Proje Numarası

Teşekkür

Kaynakça

Ayrıntılar

Birincil Dil

Konular

Bölüm

Yazarlar

Yayımlanma Tarihi

Gönderilme Tarihi

Kabul Tarihi

Yayımlandığı Sayı

DOI

IZ

Kaynak Göster

Cited By

Thin Encapsulated Flexible Pressure Sensor Suitable for Clothing Pressure Sensing Manikin