DIRECT HF ETCHING-DERIVED Ti3C2TX: A POTENT ADSORBENT FOR BASIC RED 46 DYE

Yunus Aksoy

doi:10.17780/ksujes.1500888

TR EN

DOĞRUDAN HF AŞINDIRMASIYLA ELDE EDİLMİŞ Ti3C2TX: BASIC RED 46 BOYASI İÇİN GÜÇLÜ BİR ADSORBAN

Öz

Boya kirliliği, su kaynakları ve ekosistemler için önemli bir tehdit oluşturmakta ve etkili arıtma yöntemlerinin geliştirilmesini gerektirmektedir. Oldukça toksik ve kalıcı bir azo boyası olan Basic Red 46 (BR 46), su kaynaklarından uzaklaştırılmasında belirli zorluklar ortaya çıkarmaktadır. Bu çalışmada, BR 46 giderimi için doğrudan HF (Hidroflorik asit) aşındırma yoluyla sentezlenen Ti3C2Tx (Titanyum Karbür) MXene'nin adsorpsiyon verimliliği araştırılmıştır. Ti3C2Tx'in fizikokimyasal özellikleri, Fourier dönüşümlü kızılötesi (FTIR) spektroskopisi, X-ışını difraktometresi (XRD) ve taramalı elektron mikroskobu (SEM) kullanılarak karakterize edilmiştir. Ayrıca pH, MXene miktarı ve başlangıç BR 46 konsantrasyonunun BR 46 adsorpsiyonu üzerindeki etkileri de araştırılmıştır. Sonuçlar, pH 2'de, 4 g/L Ti3C2Tx dozunda, 50 mg/L BR 46 konsantrasyonunda ve 90 dakika temas süresinde %99,98'lik maksimum BR 46 giderim verimliliğini gösterir. Bu araştırma, Ti3C2Tx MXene'nin BR 46 boya giderimi için güçlü bir adsorban olarak potansiyelinin altını çizerek gelecekteki su arıtma uygulamaları için öngörüler sunmaktadır.

Anahtar Kelimeler

DIRECT HF ETCHING-DERIVED Ti3C2TX: A POTENT ADSORBENT FOR BASIC RED 46 DYE

Abstract

Dye contamination poses a significant threat to water sources and ecosystems, necessitating the development of efficient treatment methods. Basic Red 46 (BR 46), a highly toxic and persistent azo dye, presents specific challenges in removal from water resources. This study investigates the adsorption efficiency of Ti3C2Tx (Titanium Carbide) MXene, synthesized via direct HF (Hydrofluoric acid) etching, for BR 46 removal. The physicochemical properties of Ti3C2Tx were characterized using Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Additionally, the effects of pH, MXene amount, and initial BR 46 concentration on BR 46 adsorption were also investigated. The results show a maximum BR 46 removal efficiency of 99.98% at pH 2, 4 g/L Ti3C2Tx dose, 50 mg/L BR 46 concentration, and 90 min contact time. This research underscores the potential of Ti3C2Tx MXene as a potent adsorbent for BR 46 dye removal, offering insights for future water treatment applications.

Keywords

Etik Beyan

There is no need for an ethics committee approval in the prepared article. There is no conflict of interest with any person/institution in the prepared article

Kaynakça

Abdollahi Ghahi, N., Nohekhan, M., Rezazadeh Azari, F., Rezaei Fard, B., Bakhtiari Ramezani, M., Beigmohammadi, N., … Abdollahi Dargah, M. (2022). Degradation of basic red 46 dye from color wastewater using cold atmospheric plasma. Journal of Nuclear Research and Applications, 2(4), 21–24. https://doi.org/https://doi.org/10.24200/jon.2022.1029
Adnan Maykhan, N., Alsalhy, Q. F., & Bakhtiari, O. (2023). Incorporation of graphene oxide nanosheets into polyethersulfone membranes to improve their separation performance and antifouling characteristics for Congo red removal. Water Environment Research, 95(5), e10866. https://doi.org/https://doi.org/10.1002/wer.10866
Agarwal, P., & Rani, R. (2022). Strategic management of contaminated water bodies: Omics, genome-editing and other recent advances in phytoremediation. Environmental Technology & Innovation, 27, 102463. https://doi.org/https://doi.org/10.1016/j.eti.2022.102463
Aguiar, J. E., Bezerra, B. T. C., Siqueira, A. C. A., Barrera, D., Sapag, K., Azevedo, D. C. S., … Silva Jr, I. J. (2014). Improvement in the adsorption of anionic and cationic dyes from aqueous solutions: A comparative study using aluminium pillared clays and activated carbon. Separation Science and Technology, 49(5), 741–751. https://doi.org/https://doi.org/10.1080/01496395.2013.862720
Allirani, S. (2022). Smart and Secure Dyeing Industrial Water Pollution Monitoring Using IoT. International Journal of Hyperconnectivity and the Internet of Things (IJHIoT), 6(1), 1–5. https://doi.org/https://doi.org/10.4018/ijhiot.305227
Banjare, M. K., Behera, K., & Banjare, R. K. (2023). Carbon Allotropes in Other Metals (Cu, Zn, Fe etc.) Removal. Carbon Allotropes and Composites: Materials for Environment Protection and Remediation, 113–154. https://doi.org/https://doi.org/10.1002/9781394167913.ch7
Bilal, M., Khan, U., & Ihsanullah, I. (2023). MXenes: The Emerging Adsorbents for the Removal of Dyes from Water. Journal of Molecular Liquids, 122377. https://doi.org/https://doi.org/10.1016/j.molliq.2023.122377
Devasia, S., Anand, S., & Nair, A. J. (2022). Laccase mediated bioremediation of industrial dyes by a potent strain of Arthrographis sp. International Journal of Environment and Waste Management, 29(3), 278–290. https://doi.org/https://doi.org/10.1504/ijewm.2022.122679

Ghorbani, M., Eisazadeh, H., & Ghoreyshi, A. A. (2012). Removal of zinc ions from aqueous solution using polyaniline nanocomposite coated on rice husk. Iranica Journal of Energy & Environment, 3(1). https://doi.org/https://doi.org/10.5829/idosi.ijee.2012.03.01.3343
Ghosh, S., & Sarkar, B. (2022). Emerging dye contaminants of industrial origin and their enzyme-assisted biodegradation. In Biodegradation and Detoxification of Micropollutants in Industrial Wastewater (pp. 79–102). Elsevier. https://doi.org/https://doi.org/10.1016/b978-0-323-88507-2.00005-1
Gopalram, K., Kapoor, A., Kumar, P. S., Sunil, A., & Rangasamy, G. (2023). MXenes and MXene-Based Materials for Removal and Detection of Water Contaminants: A Review. Industrial & Engineering Chemistry Research, 62(17), 6559–6583. https://doi.org/https://doi.org/10.1021/acs.iecr.3c00595
Hashemi, S. H., & Kaykhaii, M. (2022). Azo dyes: sources, occurrence, toxicity, sampling, analysis, and their removal methods. In Emerging freshwater pollutants (pp. 267–287). Elsevier. https://doi.org/https://doi.org/10.1016/b978-0-12-822850-0.00013-2
Janjhi, F. A., Ihsanullah, I., Bilal, M., Castro-Muñoz, R., Boczkaj, G., & Gallucci, F. (2023). MXene-based materials for removal of antibiotics and heavy metals from wastewater–A review. Water Resources and Industry, 100202. https://doi.org/https://doi.org/10.1016/j.wri.2023.100202
Kamsonlian, S., & Agarwal, V. (2023). Review on synthesis of plant-mediated green iron nanoparticles and their application for decolorization of dyes. Materials Today: Proceedings, 78, 99–107. https://doi.org/https://doi.org/10.1016/j.matpr.2022.11.308
Lekhak, U. M. (2023). Ecotoxicity of synthetic dyes. In Current Developments in Bioengineering and Biotechnology (pp. 45–67). Elsevier. https://doi.org/https://doi.org/10.1016/b978-0-323-91235-8.00021-8
Li, Y., Luo, H., Ji, W., Li, S., Nian, P., Xu, N., … Wei, Y. (2023). Visible-light-driven photocatalytic ZnO@ Ti3C2Tx MXene nanofiltration membranes for enhanced organic dyes removal. Separation and Purification Technology, 124420. https://doi.org/https://doi.org/10.1016/j.seppur.2023.124420
Ma, Q., Gao, J., Moussa, B., Young, J., Zhao, M., & Zhang, W. (2023). Electrosorption, Desorption, and Oxidation of Perfluoroalkyl Carboxylic Acids (PFCAs) via MXene-Based Electrocatalytic Membranes. ACS Applied Materials & Interfaces. https://doi.org/https://doi.org/10.1021/acsami.3c03991
Maheshwari, K., Agrawal, M., & Gupta, A. B. (2021). Dye pollution in water and wastewater. Novel Materials for Dye-Containing Wastewater Treatment, 1–25. https://doi.org/https://doi.org/10.1007/978-981-16-2892-4_1
Mustafa, S., Jamil, K., Zhang, L., & Girmay, M. B. (2022). Does Public Awareness Matter to Achieve the UN’s Sustainable Development Goal 6: Clean Water for Everyone? Journal of Environmental and Public Health, 2022. https://doi.org/https://doi.org/10.1155/2022/8445890
Naguib, M., Kurtoglu, M., Presser, V., Lu, J., Niu, J., Heon, M., … Barsoum, M. W. (2023). Two-dimensional nanocrystals produced by exfoliation of Ti3AlC2. In MXenes (pp. 15–29). Jenny Stanford Publishing. https://doi.org/https://dx.doi.org/10.1201/9781003306511-4
Obayomi, K. S., Lau, S. Y., Danquah, M. K., Zhang, J., Chiong, T., Obayomi, O. V., … Rahman, M. M. (2024). A response surface methodology approach for the removal of methylene blue dye from wastewater using sustainable and cost-effective adsorbent. Process Safety and Environmental Protection. https://doi.org/https://doi.org/10.1016/j.psep.2024.01.106
Pouramini, Z., Mousavi, S. M., Babapoor, A., Hashemi, S. A., Pynadathu Rumjit, N., Garg, S., … Chiang, W.-H. (2023). Recent Advances in MXene-Based Nanocomposites for Wastewater Purification and Water Treatment: A Review. Water, 15(7), 1267. https://doi.org/https://doi.org/10.3390/w15071267
Qing, Q., Shi, X., Hu, S., Li, L., Huang, T., Zhang, N., & Wang, Y. (2023). Synchronously Enhanced Removal Ability and Stability of MXene through Biomimetic Modification. Langmuir, 39(27), 9453–9467. https://doi.org/10.1021/acs.langmuir.3c00987
Rana, G., Dhiman, P., Kumar, A., Sharma, G., Verma, Y., & Chauhan, A. (2023). Functionalization of two-dimensional MXene-based nanomaterials for water purifications and energy conversion applications: A review. Materials Science in Semiconductor Processing, 165, 107645. https://doi.org/https://doi.org/10.1016/j.mssp.2023.107645
Saad, I., Ralha, N., Abukhadra, M. R., Al Zoubi, W., & Ko, Y. G. (2023). Recent advances in photocatalytic oxidation techniques for decontamination of water. Journal of Water Process Engineering, 52, 103572. https://doi.org/https://doi.org/10.1016/j.jwpe.2023.103572
Sadat, H., Guettai, N., Berkani, M., Hoang, H. Y., Shanmuganathan, R., Pugazhendhi, A., & Kadmi, Y. (2023). Recent advances in photochemical-based nanomaterial processes for mitigation of emerging contaminants from aqueous solutions. Applied Nanoscience, 13(6), 3905–3924. https://doi.org/https://doi.org/10.1007/s13204-022-02627-y
Sharma, P., & Qanungo, K. (2022). Challenges in Effluents Treatment Containing Dyes. Adv Res Text Eng, 7(2), 1075. https://doi.org/https://doi.org/10.26420/advrestexteng.2022.1075
Solangi, N. H., Karri, R. R., Mubarak, N. M., Mazari, S. A., Jatoi, A. S., & Koduru, J. R. (2023). Emerging 2D MXene-based adsorbents for hazardous pollutants removal. Desalination, 549, 116314. https://doi.org/https://doi.org/10.1016/j.desal.2022.116314
Tawalbeh, M., Mohammed, S., Al-Othman, A., Yusuf, M., Mofijur, M., & Kamyab, H. (2023). MXenes and MXene-based materials for removal of pharmaceutical compounds from wastewater: Critical review. Environmental Research, 115919. https://doi.org/https://doi.org/10.1016/j.envres.2023.115919
Tkaczyk, A., Mitrowska, K., & Posyniak, A. (2020). Synthetic organic dyes as contaminants of the aquatic environment and their implications for ecosystems: A review. Science of the Total Environment, 717, 137222. https://doi.org/https://doi.org/10.1016/j.scitotenv.2020.137222
Verma, A. K., Karande, S., & Mathur, A. (2022). Role of biofilms to curb contamination in water bodies. In Relationship Between Microbes and the Environment for Sustainable Ecosystem Services, Volume 2 (pp. 77–93). Elsevier. https://doi.org/https://doi.org/10.1016/b978-0-323-89937-6.00006-1
Wang, R., Cao, H., Yao, C., Peng, C., Qiu, J., Dou, K., … Wang, W. (2023). Construction of alkalized MXene-supported CoFe2O4/CS composites with super-strong adsorption capacity to remove toxic dyes from aqueous solution. Applied Surface Science, 624, 157091. https://doi.org/https://doi.org/10.1016/j.apsusc.2023.157091
Wang, Y., Gao, X., Zhang, L., Wu, X., Wang, Q., Luo, C., & Wu, G. (2019). Synthesis of Ti3C2/Fe3O4/PANI hierarchical architecture composite as an efficient wide-band electromagnetic absorber. Applied Surface Science, 480, 830–838. https://doi.org/https://doi.org/10.1016/j.apsusc.2019.03.049
Wiśniewska, M., Chibowski, S., Wawrzkiewicz, M., Onyszko, M., & Bogatyrov, V. (2022). CI Basic Red 46 removal from sewage by carbon and silica based composite: equilibrium, kinetic and electrokinetic studies. Molecules, 27(3), 1043. https://doi.org/https://doi.org/10.3390/molecules27031043
Wong, S., Ghafar, N. A., Ngadi, N., Razmi, F. A., Inuwa, I. M., Mat, R., & Amin, N. A. S. (2020). Effective removal of anionic textile dyes using adsorbent synthesized from coffee waste. Scientific Reports, 10(1), 2928. https://doi.org/https://doi.org/10.1038/s41598-020-60021-6
Yan, J., Liu, P. F., Wen, H. X., & Liu, H. J. (2022). Effective Removal of Basic Red 46 with Ti3C2 Powder Modified with Citric acid. ChemistrySelect, 7(29), e202201733. https://doi.org/https://doi.org/10.1002/slct.202201733
Zhang, G., Wang, T., Xu, Z., Liu, M., Shen, C., & Meng, Q. (2020). Synthesis of amino-functionalized Ti 3 C 2 T x MXene by alkalization-grafting modification for efficient lead adsorption. Chemical Communications, 56(76), 11283–11286. https://doi.org/https://doi.org/10.1039/d0cc04265j
Zhang, Y., Luo, J., Feng, B., Xu, H., Sun, Y., Gu, X., … Ren, H. (2023). Delamination of multilayer Ti3C2Tx MXene alters its adsorpiton and reduction of heavy metals in water. Environmental Pollution, 330, 121777. https://doi.org/https://doi.org/10.1016/j.envpol.2023.121777

Ayrıntılar

Birincil Dil

İngilizce

Konular

Çevre Kirliliği ve Önlenmesi

Bölüm

Araştırma Makalesi

Yazarlar

Yunus Aksoy ^*
0000-0002-6047-2101
Türkiye

Yayımlanma Tarihi

3 Aralık 2024

Gönderilme Tarihi

13 Haziran 2024

Kabul Tarihi

8 Temmuz 2024

Yayımlandığı Sayı

Yıl 2024 Cilt: 27 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.1500888

IZ

https://izlik.org/JA68LH44HC

Kaynak Göster

RIS / Bibtex

APA

Aksoy, Y. (2024). DIRECT HF ETCHING-DERIVED Ti3C2TX: A POTENT ADSORBENT FOR BASIC RED 46 DYE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 27(4), 1571-1581. https://doi.org/10.17780/ksujes.1500888

Cited By

Determination of copper (II) in seafood and water samples by ICP-OES using magnetic titanium aluminum carbide nanocomposite for solid phase microextraction

Journal of Food Composition and Analysis

https://doi.org/10.1016/j.jfca.2025.107541

MXenes in membrane engineering: Unlocking the new potential for water treatment

Water Supply

https://doi.org/10.2166/ws.2025.072

ZnO STRUCTURES: THE ROLE OF MORPHOLOGY IN PHOTOCATALYTIC DEGRADATION OF REACTIVE RED-194 DYE

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi

https://doi.org/10.17780/ksujes.1645182