3B YAZICIDA POLİLAKTİKASİT VE CAM FİBER KATKILI POLİPROPİLEN MALZEMELER İLE ÜRETİLEN PARÇALARIN MEKANİK PERFORMANSININ İNCELENMESİ

Ahmet Serdar Güldibi; Oğuz Koçar; Nergizhan Anaç; Furkan Parmaksız

doi:10.17780/ksujes.1651450

TR EN

3B YAZICIDA POLİLAKTİKASİT VE CAM FİBER KATKILI POLİPROPİLEN MALZEMELER İLE ÜRETİLEN PARÇALARIN MEKANİK PERFORMANSININ İNCELENMESİ

Öz

Bu çalışmada, üç boyutlu (3B) yazıcılarda sıklıkla kullanılan Polilaktikasit (PLA) ve cam fiber katkılı Polipropilen (PP GF30) malzemelerinin mekanik özellikleri incelenmiştir. Dört farklı doluluk oranı (%20, %50, %80 ve %100) ve üç farklı dolgu deseni (gyroid, ızgara ve üçgen) kullanılarak üretilen numunelerin çekme ve eğme testleri gerçekleştirilmiştir. Sonuçlar, PLA’nın eğme direncinin PP GF30’a göre daha yüksek olduğunu; ancak düşük doluluk oranlarında PP GF30 numunelerinin çekme dayanımının PLA’dan daha iyi sonuçlar verdiğini göstermektedir. Tam dolu (%100) numunelerde PLA çekmede daha yüksek mukavemet sergilerken, PP GF30 ise özellikle %20, %50 ve %80 doluluk oranlarında üstün performans ortaya koymuştur. Her iki malzeme için de gyroid deseni, çekme ve eğme testlerinde genellikle en iyi sonuçları vermiştir. Elde edilen bulgular, malzeme seçimi ve dolgu parametrelerinin 3B baskıyla üretilen parçaların mekanik performansı üzerindeki kritik rolünü ortaya koymaktadır.

Anahtar Kelimeler

Kaynakça

3 Types of Plastic Used in 3D Printing—SGS PSI. (n.d.). Retrieved February 4, 2025, from https://www.polymersolutions.com/plastic-in-3d-printing/
Altun, S., & Sekban, B. (2023). 3b Yazıcılar İçin Cam Fiber Katkılı Kompozit Filament Üretimi Ve Mekanik Özellikleri. International Journal of 3D Printing Technologies and Digital Industry, 7(1), 64–77. https://doi.org/10.46519/ij3dptdi.1262980
BASF Ultrafuse PP GF30 Siyah Filament (1.75mm—2.85mm)—Mikron3D. (n.d.). Retrieved August 2, 2025, from
BASF Ultrafuse PP GF30 Siyah Filament (1.75mm—2.85mm)—Mikron3D website: https://www.mikron3d.com/basf-ultrafuse-pp-gf30-siyah-filament-1-75mm-2-85mm-720-d.html
Bax, B., & Müssig, J. (2008). Impact and tensile properties of PLA/Cordenka and PLA/flax composites. Composites Science and Technology, 68(7), 1601–1607. https://doi.org/10.1016/j.compscitech.2008.01.004
Carneiro, O. S., Silva, A. F., & Gomes, R. (2015). Fused deposition modeling with polypropylene. Materials & Design, 83, 768–776. https://doi.org/10.1016/j.matdes.2015.06.053
Chawla, K. K. (2001). Glass Fibers. Encyclopedia of Materials: Science and Technology, 3541–3545. https://doi.org/10.1016/B0-08-043152-6/00630-6
D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. (2017, July). Retrieved February 4, 2025, from https://www.astm.org/d0790-17.html

DeStefano, V., Khan, S., & Tabada, A. (2020). Applications of PLA in modern medicine. Engineered Regeneration, 1, 76–87. https://doi.org/10.1016/j.engreg.2020.08.002
Etcheverry, M., & Barbosa, S. E. (2012). Glass Fiber Reinforced Polypropylene Mechanical Properties Enhancement by Adhesion Improvement. Materials, 5, 1084–1113. https://doi.org/10.3390/ma5061084
FibreX PP+GF30 Filament. (n.d.). Retrieved August 2, 2025, from 3DXTECH website: https://www.3dxtech.com/products/fibrex-pp-gf30-1
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011). From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors. Biomacromolecules, 12(3), 523–532. https://doi.org/10.1021/bm101302t
Kabiri, A., Liaghat, G., Alavi, F., Saidpour, H., Hedayati, S. K., Ansari, M., & Chizari, M. (2020). Glass fiber/polypropylene composites with potential of bone fracture fixation plates: Manufacturing process and mechanical characterization. Journal of Composite Materials, 54(30), 4903–4919. https://doi.org/10.1177/0021998320940367
Kadhum, A. H., Al-Zubaidi, S., & Abdulkareem, S. S. (2023). Effect of the Infill Patterns on the Mechanical and Surface Characteristics of 3D Printing of PLA, PLA+ and PETG Materials. ChemEngineering 2023, Vol. 7, Page 46, 7(3), 46. https://doi.org/10.3390/CHEMENGINEERING7030046
Kamer, M. S., Temiz, Ş., Yaykaşlı, Dr. H., & Kaya, A. (2021). 3 Boyutlu Yazıcı İle Farklı Renklerde ve Farklı Dolgu Desenlerinde Üretilen Çekme Test Numunelerinin Mekanik Özelliklerinin İncelenmesi. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 26(3), 829–848. https://doi.org/10.17482/UUMFD.887786
Karakuş, S. (2023). DESIGN AND MANUFACTURING OF A TWO-STAGE REDUCTION GEARBOX WITH 3D PRINTERS. International Journal of 3D Printing Technologies and Digital Industry, 7(1), 18–28. https://doi.org/10.46519/IJ3DPTDI.1206809
Krčma, M., & Paloušek, D. (2022). Comparison of the effects of multiaxis printing strategies on large-scale 3D printed surface quality, accuracy, and strength. International Journal of Advanced Manufacturing Technology, 119(11–12), 7109–7120. https://doi.org/10.1007/S00170-022-08685-4/FIGURES/20
Kuiper, S. (2022, November 22). 3D Printing of Continuous Glass Fibre Reinforced Polypropylene Composites. [Info:eu-repo/semantics/masterThesis]. Retrieved August 2, 2025, from https://essay.utwente.nl/93877/
Kyutoku, H., Maeda, N., Sakamoto, H., Nishimura, H., & Yamada, K. (2019). Effect of surface treatment of cellulose fiber (CF) on durability of PLA/CF bio-composites. Carbohydrate Polymers, 203, 95–102. https://doi.org/10.1016/J.CARBPOL.2018.09.033
Lee, B. K., Yun, Y., & Park, K. (2016). PLA micro- and nano-particles. Advanced Drug Delivery Reviews, 107, 176–191. https://doi.org/10.1016/J.ADDR.2016.05.020
Liu, D., Sun, Z., Chaichana, T., Ducke, W., & Fan, Z. (2018). Patient-Specific 3D Printed Models of Renal Tumours Using Home-Made 3D Printer in Comparison with Commercial 3D Printer. Journal of Medical Imaging and Health Informatics, 8(2), 303–308. https://doi.org/10.1166/JMIHI.2018.2294
Mahato, K. K., Dutta, K., & Ray, B. C. (2020). Emerging advancement of fiber-reinforced polymer composites in structural applications. New Materials in Civil Engineering, 221–271. https://doi.org/10.1016/B978-0-12-818961-0.00006-5
MarketsandMarkets. (2025). Global 3D Printing Market Size, Share, Trends & Growth Analysis 2032 (No. SE 2936). Retrieved from https://www.marketsandmarkets.com/Market-Reports/3d-printing-market-1276.html
Moczadlo, M., Chen, Q., Cheng, X., Smith, Z. J., Caldona, E. B., & Advincula, R. C. (2023). On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties. MRS Communications, 13(1), 169–176. https://doi.org/10.1557/S43579-023-00329-2/FIGURES/4
Molina, A., & Acosta-Sullcahuamán, J. (2025). Effect of the Process Parameters on the Mechanical Properties of 3D-Printed Specimens Fabricated by Material Extrusion 3D Printing. Engineering Proceedings, 83(1), 1. https://doi.org/10.3390/engproc2025083001
Murariu, M., & Dubois, P. (2016). PLA composites: From production to properties. Advanced Drug Delivery Reviews, 107, 17–46. https://doi.org/10.1016/j.addr.2016.04.003
Padden, F. J., & Keith, H. D. (1959). Spherulitic Crystallization in Polypropylene. Journal of Applied Physics, 30(10), 1479–1484. https://doi.org/10.1063/1.1734985
Petousis, M., Michailidis, N., Papadakis, V., Mountakis, N., Argyros, A., Spiridaki, M., … Vidakis, N. (2023). The impact of the glass microparticles features on the engineering response of isotactic polypropylene in material extrusion 3D printing. Materials Today Communications, 37, 107204. https://doi.org/10.1016/j.mtcomm.2023.107204
PP-GF-filament. (n.d.). Retrieved August 2, 2025, from https://www.filameon.com/urun/pp-gf-filament Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013). Polylactide (PLA)-based nanocomposites. Progress in Polymer Science, 38(10), 1504–1542. https://doi.org/10.1016/j.progpolymsci.2013.05.014
Russell, G. (2024, September 17). The Properties of Glass Fiber Reinforced Polypropylene Filaments Recycled from Fishing Gear. arXiv. https://doi.org/10.48550/arXiv.2409.09445
Şentürk, B., Çetin, K., Ürküt, S. N., Anaç, N., & Koçar, O. (2022). Jig design and manufacturing for adhesive thickness control in adhesive joints. Journal of Materials and Manufacturing, 1(2), 17–23. https://doi.org/10.5281/ZENODO.7472057
Sodeifian, G., Ghaseminejad, S., & Yousefi, A. A. (2019). Preparation of polypropylene/short glass fiber composite as Fused Deposition Modeling (FDM) filament. Results in Physics, 12, 205–222. https://doi.org/10.1016/J.RINP.2018.11.065
Turaka, S., Jagannati, V., Pappula, B., & Makgato, S. (2024). Impact of infill density on morphology and mechanical properties of 3D printed ABS/CF-ABS composites using design of experiments. Heliyon, 10(9), 29920. https://doi.org/10.1016/J.HELIYON.2024.E29920/ASSET/05E25AAE-584B-494E-988F-36CF7FA3EC46/MAIN.ASSETS/GR22_LRG.JPG
Ultimaker. (2020). Ultimaker-PLA-TDS-v5.00.
Ultrafuse PP GF30. (2019). Retrieved from https://forward-am.com/wp-content/uploads/2021/07/Ultrafuse_PP_GF30_TDS_EN_v2.3-2.pdf
Vert, M., Schwarch, G., & Coudane, J. (1995). Present and Future of PLA Polymers. Journal of Macromolecular Science, Part A, 32(4), 787–796. https://doi.org/10.1080/1060132950801028

Ayrıntılar

Birincil Dil

Türkçe

Konular

Malzeme Bilimi ve Teknolojileri , Malzeme Tasarım ve Davranışları

Bölüm

Araştırma Makalesi

Yazarlar

Ahmet Serdar Güldibi ^*
0000-0001-7021-060X
Türkiye

Oğuz Koçar
0000-0002-1928-4301
Türkiye

Nergizhan Anaç
0000-0001-6738-9741
Türkiye

Furkan Parmaksız
0000-0001-7002-9157
Türkiye

Yayımlanma Tarihi

3 Aralık 2025

Gönderilme Tarihi

5 Mart 2025

Kabul Tarihi

25 Ağustos 2025

Yayımlandığı Sayı

Yıl 1970 Cilt: 28 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.1651450

IZ

https://izlik.org/JA48FZ36ZY

Kaynak Göster

RIS / Bibtex

APA

Güldibi, A. S., Koçar, O., Anaç, N., & Parmaksız, F. (2025). 3B YAZICIDA POLİLAKTİKASİT VE CAM FİBER KATKILI POLİPROPİLEN MALZEMELER İLE ÜRETİLEN PARÇALARIN MEKANİK PERFORMANSININ İNCELENMESİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 28(4), 1688-1702. https://doi.org/10.17780/ksujes.1651450

3B YAZICIDA POLİLAKTİKASİT VE CAM FİBER KATKILI POLİPROPİLEN MALZEMELER İLE ÜRETİLEN PARÇALARIN MEKANİK PERFORMANSININ İNCELENMESİ

3B YAZICIDA POLİLAKTİKASİT VE CAM FİBER KATKILI POLİPROPİLEN MALZEMELER İLE ÜRETİLEN PARÇALARIN MEKANİK PERFORMANSININ İNCELENMESİ

Öz

Anahtar Kelimeler

INVESTIGATION OF MECHANICAL PERFORMANCE OF PARTS PRODUCED WITH POLYLACTICACID AND GLASS FIBER REINFORCED POLYPROPYLENE MATERIALS IN 3D PRINTER

Abstract

Keywords

Kaynakça

Ayrıntılar

Birincil Dil

Konular

Bölüm

Yazarlar

Yayımlanma Tarihi

Gönderilme Tarihi

Kabul Tarihi

Yayımlandığı Sayı

DOI

IZ

Kaynak Göster