SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE

Tuba Demir; Bahar Demirel; Nisanur Gözet

TR EN

SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE

Öz

This study investigates the use of glass powder (GP) as a sustainable alternative to cement in the production of lightweight concrete, addressing the environmental footprint reduction and waste management of traditional concrete materials. In this study, 8 different concrete series were produced by substituting CT with cement in varying ratios. The produced samples were cured using standard methods and kept in MgSO4 and Na2SO4 solutions for specific periods of time, and their mechanical performance and microstructural properties were evaluated. As a result of the tests performed on the concrete specimens obtained, it was found that 5% and 10% GP substitution provided maximum performance. The originality of the study is the feasibility of reducing the amount of cement while maintaining the performance of lightweight concrete and it is thought to contribute significantly to sustainability studies. In addition, the use of GP in concrete production reduces material weight, contributes to sustainable construction practices and offers a viable alternative in lightweight concrete production.

Anahtar Kelimeler

Kaynakça

ACI 213R-14. (2014). Guide For Structural Lightweight-Aggregate Concrete. American Concrete Institute, Farmington Hills, MI, USA.
Alsaif, A. (2021). Utilization of ceramic waste as partially cement substitute–A review. Construction and Building Materials, 300, 124009. https://doi.org/10.1016/j.conbuildmat.2021.124009
Arslan, F., Benli, A., & Karatas, M. (2020). Effect of high temperature on the performance of self-compacting mortars produced with calcined kaolin and metakaolin. Construction and Building Materials, 256, 119497. https://doi.org/10.1016/j.conbuildmat.2020.119497
ASTM C1012-87, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution. (2010).
Balapour, M., Joshaghani, A., & Althoey, F. (2018). Nano-SiO2contribution to mechanical, durability, fresh and microstructural characteristics of concrete: A review. In Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.05.266
Benli, A. (2019). Mechanical and durability properties of self‐compacting mortars containing binary and ternary mixes of fly ash and silica fume. Structural Concrete, 20(3), 1096–1108. https://doi.org/10.1002/suco.201800302
Bisikirske, D., Blumberga, D., Vasarevicius, S., & Skripkiunas, G. (2019). Multicriteria analysis of glass waste application. Environ. Clim. Technol, 23(1), 152–167. doi: 10.2478/rtuect-2019-0011
Chen, Y., Yu, R., Wang, X., Chen, J., & Shui, Z. (2018). Evaluation and optimization of Ultra-High Performance Concrete (UHPC) subjected to harsh ocean environment: Towards an application of Layered Double Hydroxides (LDHs). Construction and Building Materials, 177. https://doi.org/10.1016/j.conbuildmat.2018.03.210

Çınar, E., Dündar, B., & Şahin, E. (2020). Physical and mechanical properties of glass powder added fibrous mortars. Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 3(1), 17–23. https://izlik.org/JA95ED36AT
Colman, C., Bulteel, D., Elkarim, B. M., Rémond, S., & Courard, L. (2022). Expansion of concrete by secondary ettringite formation due to fine recycled aggregates contaminated with gypsum. Advances in Cement Research, 35(11), 480–488. https://doi.org/10.1680/jadcr.22.00043
Demir, T., & Alyamaç, K. E. (2022). Investigation of the Use of Marble Powder in Production of High Strength Concretes. Open Journal of Nano, 7(1), 18–25. https://doi.org/10.56171/ojn.1034691
Demir, T., Demirel, B., & Öztürk, M. (2022). An Evaluation of the Effect of Waste Aluminum Sawdust on the Carbonation of Concrete. Bitlis Eren University Journal of Science, 11(4), 993–999. https://doi.org/10.17798/bitlisfen.1141419
Derinpinar, A. N., Karakoç, M. B., & Özcan, A. (2022). Performance of glass powder substituted slag based geopolymer concretes under high temperature. Construction and Building Materials, 331, 127318. https://doi.org/10.1016/j.conbuildmat.2022.127318
Dündar, B., Çınar, E., & Çalışkan, A. N. (2020). An investigation of high temperature effect on pumice aggregate light mortars with brick flour. Res. Eng. Struct. Mat, 6, 241–255. http://dx.doi.org/10.17515/resm2019.163ma1121
Ganesh, A. C., & Muthukannan, M. (2020). Development of high performance sustainable optimized fiber reinforced geopolymer concrete and prediction of compressive strength. Journal of Cleaner Production, 282, 124543. https://doi.org/10.1016/j.jclepro.2020.124543
Gözet, N. (2024). Investigation of strength and durability properties of lightweight concrete produced using waste glass powder [Firat University]. https://tez.yok.gov.tr/UlusalTezMerkezi/tezSorguSonucYeni.jsp
Hamada, H. M., Al-Attar, A. A., Tayeh, B., & Yahaya, F. B. M. (2022). Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method. Case Studies in Construction Materials, 16, e01061. https://doi.org/10.1016/j.cscm.2022.e01061
Hoppe Filho, J., Pires, C. A. de O., Leite, O. D., Garcez, M. R., & Medeiros, M. H. F. de. (2021). Red ceramic waste as supplementary cementitious material: Microstructure and mechanical properties. Construction and Building Materials, 296, 123653. https://doi.org/10.1016/j.conbuildmat.2021.123653
Ishaq, M. B., Mohammed, A. S., & Mohammed, A. A. (2025). Novel exploration of chemical compounds in mono-variate, Bi-variate, and multi-variate scenarios of waste glass powder as a cement replacement in concrete. Sustainable Chemistry and Pharmacy, 43, 101894. https://doi.org/10.1016/j.scp.2024.101894
Jain, S., Singhal, S., & Pandey, S. (2020). Environmental life cycle assessment of construction and demolition waste recycling: A case of urban India. Resources, Conservation and Recycling, 155, 104642. https://doi.org/10.1016/j.resconrec.2019.104642
Leemann, A., Münch, B., Lothenbach, B., Bernard, E., Trottier, C., Winnefeld, F., & Sanchez, L. (2025). Alkali-carbonate reaction in concrete-Microstructural consequences and mechanism of expansion. Cement and Concrete Research, 195, 107903. https://doi.org/10.1016/j.cemconres.2025.107903
Lin, J., Tan, T. H., Yeo, J. S., Goh, Y., Ling, T.-C., & Mo, K. H. (2023). Municipal woody biomass waste ash-based cold-bonded artificial lightweight aggregate produced by one-part alkali-activation method. Construction and Building Materials, 394, 131619. https://doi.org/10.1016/j.conbuildmat.2023.131619
Liu, X., Wen, Y., Chen, S., & Jiang, M. (2025). Geopolymer cold-bonded lightweight aggregate concrete: Mechanical properties and microstructure. Construction and Building Materials, 465, 140261. https://doi.org/10.1016/j.conbuildmat.2025.140261
Miao, X., Chen, B., & Zhao, Y. (2024). Prediction of compressive strength of glass powder concrete based on artificial intelligence. Journal of Building Engineering, 91, 109377. https://doi.org/10.1016/j.jobe.2024.109377
Osfouri, M., Ibrahim, J.-E. F. M., Sambucci, M., Valente, M., Tirillò, J., & Andrea, S. (2025). Sustainable structural lightweight concrete containing foam glass aggregates. Journal of Building Engineering, 104, 112270. https://doi.org/10.1016/j.jobe.2025.112270
Paul, D., Bindhu, K. R., Matos, A. M., & Delgado, J. (2022). Eco-friendly concrete with waste glass powder: A sustainable and circular solution. Construction and Building Materials, 355, 129217. https://doi.org/10.1016/j.conbuildmat.2022.129217
Raju, S., & Kumar, P. R. (2014). Effect of using glass powder in concrete. International Journal of Innovative Research in Science, Engineering and Technology, 31, 21–427. ISSN (Online) : 2319 - 8753
Shang, X., Li, Z., Chang, J., Chen, Y., Yang, J., & Duan, Z. (2024). Production, properties and life cycle assessment of artificial lightweight aggregates produced with corn straw ash (CSA) and concrete slurry waste (CSW). Construction and Building Materials, 411, 134274. https://doi.org/10.1016/j.conbuildmat.2023.134274
Singhal, V., Nagar, R., & Agrawal, V. (2021). Use of marble slurry powder and fly ash to obtain sustainable concrete. Materials Today: Proceedings, 44, 4387–4392. https://doi.org/10.1016/j.matpr.2020.10.572
TS EN12390-3. (2003). Concrete-Part 3: Hardened Concrete Tests-Determination of Compressive Strength in Test Specimens. Turkish Standards Institute Ankara.
TS802. (2016). Concrete mix design calculation principles. Turkish Standards Institute Ankara.
Turkey, F. A., Beddu, S. B., Ahmed, A. N., & Al-Hubboubi, S. K. (2022). Effect of high temperatures on the properties of lightweight geopolymer concrete based fly ash and glass powder mixtures. Case Studies in Construction Materials, 17, e01489. https://doi.org/10.1016/j.cscm.2022.e01489
Ulucan, M., & Alyamac, K. E. (2023). A comprehensive assessment of mechanical and environmental properties of green concretes produced using recycled concrete aggregates and supplementary cementitious material. Environmental Science and Pollution Research, 30(43), 97765–97785. https://doi.org/10.1007/s11356-023-29197-y
Wu, Z., Shi, C., Khayat, K. H., & Xie, L. (2018). Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC. Construction and Building Materials, 182. https://doi.org/10.1016/j.conbuildmat.2018.06.126
Xuan, D., Ma, X., & Shang, Y. (2020). Can China’s policy of carbon emission trading promote carbon emission reduction? Journal of Cleaner Production, 270, 122383. https://doi.org/10.1016/j.jclepro.2020.122383
Zhang, Y., Aslani, F., & Lehane, B. (2021). Compressive strength of rubberized concrete: Regression and GA-BPNN approaches using ultrasonic pulse velocity. Construction and Building Materials, 307, 124951. https://doi.org/10.1016/j.conbuildmat.2021.124951

Ayrıntılar

Birincil Dil

İngilizce

Konular

Yapı Malzemeleri

Bölüm

Araştırma Makalesi

Yazarlar

Tuba Demir ^*
0000-0003-2092-1029
Türkiye

Bahar Demirel
0000-0001-7483-2668
Türkiye

Nisanur Gözet
0000-0002-2165-7648
Türkiye

Yayımlanma Tarihi

3 Haziran 2026

Gönderilme Tarihi

24 Kasım 2025

Kabul Tarihi

14 Nisan 2026

Yayımlandığı Sayı

Yıl 2026 Cilt: 29 Sayı: 2

IZ

https://izlik.org/JA43LP72XM

Kaynak Göster

RIS / Bibtex

APA

Demir, T., Demirel, B., & Gözet, N. (2026). SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 29(2), 666-677. https://izlik.org/JA43LP72XM

AMA

1.Demir T, Demirel B, Gözet N. SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29(2):666-677. https://izlik.org/JA43LP72XM

Chicago

Demir, Tuba, Bahar Demirel, ve Nisanur Gözet. 2026. “SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 (2): 666-77. https://izlik.org/JA43LP72XM.

EndNote

Demir T, Demirel B, Gözet N (01 Haziran 2026) SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 2 666–677.

IEEE

[1]T. Demir, B. Demirel, ve N. Gözet, “SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE”, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 2, ss. 666–677, Haz. 2026, [çevrimiçi]. Erişim adresi: https://izlik.org/JA43LP72XM

ISNAD

Demir, Tuba - Demirel, Bahar - Gözet, Nisanur. “SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29/2 (01 Haziran 2026): 666-677. https://izlik.org/JA43LP72XM.

JAMA

1.Demir T, Demirel B, Gözet N. SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29:666–677.

MLA

Demir, Tuba, vd. “SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 2, Haziran 2026, ss. 666-77, https://izlik.org/JA43LP72XM.

Vancouver

1.Tuba Demir, Bahar Demirel, Nisanur Gözet. SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi [Internet]. 01 Haziran 2026;29(2):666-77. Erişim adresi: https://izlik.org/JA43LP72XM

ATIK CAM TOZU KULLANILARAK ÜRETİLEN SÜRDÜRÜLEBİLİR HAFİF BETON: MEKANİK ÖZELLİKLER VE MİKRO YAPI

Öz

Anahtar Kelimeler

SUSTAINABLE LIGHTWEIGHT CONCRETE PRODUCED USING WASTE GLASS POWDER: MECHANICAL PROPERTIES AND MICROSTRUCTURE

Öz

Anahtar Kelimeler

Kaynakça

Ayrıntılar

Birincil Dil

Konular

Bölüm

Yazarlar

Yayımlanma Tarihi

Gönderilme Tarihi

Kabul Tarihi

Yayımlandığı Sayı

IZ

Kaynak Göster