EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES

Baran Erkek; Ertan Kösedağ

TR EN

3B BASKIYLA ÜRETİLEN PLA DOLGU MALZEMESİNİN DOĞAL JÜT ELYAF TAKVİYELİ KOMPOZİT BORULARIN YANAL EZİLME DAVRANIŞI ÜZERİNDEKİ ETKİLERİ

Öz

Kompozit malzemeler, mühendislik uygulamalarının vazgeçilmez bir parçası olmaya devam etmektedir. Mukavemetleri, hafiflikleri ve enerji emici bileşenlerdeki iyi performansları nedeniyle kullanımları artmaktadır. Bu çalışmada, doğal bir lif olan jüt lifi, epoksi reçine ile infüzyon yöntemi kullanılarak kompozit tüpler üretilmiştir. Silindirik kompozitler için geleneksel üretim yöntemlerinden farklı olarak, vakum infüzyon yöntemi kullanılmıştır. 3B yazıcı kullanılarak üretilen üç farklı dolgu malzemesi tüplerin içine yerleştirilmiş ve tepe kuvveti, enerji emilimi ve özgül enerji emilimi değerleri karşılaştırılmıştır. Kullanılan dolgu geometrileri doğrusal, hilbert ve altıgen petek yapılardır. Dolgusuz jüt lifi takviyeli epoksi reçine matris kompoziti (JFRP) ile kompozitin kendisi arasında karşılaştırmalar yapılmıştır. En yüksek pik kuvveti değeri, altıgen petek dolgulu JFRPHH numunesinde 1,94 kN olarak belirlendi. En yüksek enerji emilimi ve özgül enerji emilimi de altıgen petek dolgulu kompozit numunede elde edildi. Elde edilen değerler sırasıyla 12,85 joule ve 0,331 J/g idi. En düşük enerji emilimi değeri ise dolgusuz numunede elde edildi; elde edilen değer 6,70 joule idi. Dolgu malzemesinin eklenmesinin kompozit numunelerin tepe dayanımı ve enerji emilim değerlerini etkilediği gözlemlendi.

Anahtar Kelimeler

EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES

Öz

Composite materials continue to be an indispensable part of engineering applications. Their use is increasing due to their strength, lightness, and good performance in energy absorbing components. In this study, composite tubes were produced by infusing jute fiber, a natural fiber, with epoxy resin. Unlike traditional production methods for cylindrical composites, the vacuum infusion method was used. Three different types of filler materials, produced using a 3D printer, were placed inside the tubes, and their peak force, energy absorption, and specific energy absorption values were compared. The filler geometries used were linear, hilbert, and hexagonal honeycomb structures. Comparisons were made between jute fiber reinforced epoxy resin matrix composite (JFRP) without filler and the composite itself. The highest peak strength value was determined to be 1.94 kN in the JFRPHH sample with hexagonal honeycomb filler. The highest energy absorption and specific energy absorption were also obtained with the hexagonal honeycomb filled composite sample. The obtained values were 12.85 joules and 0.331 J/g, respectively. The lowest energy absorption value was obtained with the sample without filler; the obtained value was 6.70 joules. It was observed that the addition of filler material affected the peak strength and energy absorption values of the composite samples.

Anahtar Kelimeler

Kaynakça

Ahmad, M. A. A., Ridzuan, M. J. M., Majid, M. S. A., Sapuan, S. M., Ismail, M. S., Razlan, Z. M., & Shahriman, A. B. (2024). Thermal behaviour of graphene nanoplatelets and multiwalled carbon nanotubes filled-glass fibre-reinforced epoxy composites. Journal of Thermal Analysis and Calorimetry, 149(12), 6063–6080. https://doi.org/10.1007/s10973-024-13195-4
Alagumalai, V., Shanmugam, V., P, T., & Murugaiyan, T. (n.d.). Effect of infill structures on compressive properties of additively manufactured nylon carbon fibre composite cylinders. Journal of Reinforced Plastics and Composites, 0(0), 07316844251332323. https://doi.org/10.1177/07316844251332323
Altin, M., Güler, M. A., & Mert, S. K. (2017). The effect of percent foam fill ratio on the energy absorption capacity of axially compressed thin-walled multi-cell square and circular tubes. International Journal of Mechanical Sciences, 131–132, 368–379. https://doi.org/10.1016/j.ijmecsci.2017.07.003
Awd Allah, M. M., Abd El-Halim, M. F., Abbas, M. A., Almuflih, A. S., Saleh, D. I., & Abd El-baky, M. A. (2025). Discovering the Impact of Printing Parameters on the Crashworthiness Performance of 3D-Printed Cellular Structures. Fibers and Polymers, 26(1), 297–315. https://doi.org/10.1007/s12221-024-00799-8
Awd Allah, M. M., Hegazy, D. A., Almuflih, A. S., & Abd El‐baky, M. A. (2025). Experimental Optimization of Energy Absorption in Foam‐Filled Square Multicell Composite Tubes Under Quasi‐Static Loading. Polymer Composites, pc.70127. https://doi.org/10.1002/pc.70127
Bader, S. T., Hamzah, M. N., & Atiyah, Q. A. (2025). Numerical Investigation of Energy Absorption in Graded Honeycomb-Filled Composite Crash Box Structures. International Journal of Automotive Technology. https://doi.org/10.1007/s12239-025-00330-9
Djamaluddin, F. (2024). Optimization of foam-filled crash-box under axial loading for pure electric vehicle. Results in Materials, 21, 100505. https://doi.org/10.1016/j.rinma.2023.100505
Ekici, Recep., & Kösedağ, E. (2017). Comparison of the low-velocity impact behaviors of SiC and pumice particle-reinforced metal matrix composites. International Journal of Mechanical and Production Engineering, 5(10).

Erkek, B., Adin, M. Ş., Kosedag, E., Bronis, M., & Adin, H. (2026). Effects of Artificial Hydrothermal Aging on Crush Boxes Made from Glass, Carbon and Aramid Fiber-Reinforced Hybrid Composites. Polymers, 18(2), 249. https://doi.org/10.3390/polym18020249
Erkek, B., Kosedag, E., & Adin, H. (2025). The impact of graphene filler on the energy absorption of hybrid composite crash boxes. International Journal of Mechanics and Materials in Design, 21(2), 339–355. https://doi.org/10.1007/s10999-024-09739-z
Hou, W., He, P., Yang, Y., & Sang, L. (2023). Crashworthiness optimization of crash box with 3D-printed lattice structures. International Journal of Mechanical Sciences, 247, 108198. https://doi.org/10.1016/j.ijmecsci.2023.108198
Huo, R. Y., Han, D., Zhang, Y., Jiang, W., Fan, L. Y., Peng, X. W., Shi, G. C. J., Chu, M. H., Zhang, X. Y., Xie, Y. M., & Ren, X. (2023). Mechanical properties of auxetic circular and square tubes filled with aluminum foam. Engineering Structures, 281, 115732. https://doi.org/10.1016/j.engstruct.2023.115732
Kosedag, E. (2023). Effect of artificial aging on 3-point bending behavior of glass fiber/epoxy composites. Journal of Reinforced Plastics and Composites, 42(21–22), 1147–1153. https://doi.org/10.1177/07316844221146287
Kosedag, E., Araz, Z., & Erkek, B. (2025). Effect of Geometry and Fiber Type on Energy Absorption in Polymer Based Composite Crash Boxes: An Experimental Study. Polymer Composites, pc.70311. https://doi.org/10.1002/pc.70311
Li, X., Lv, X., Jiang, T., Zhao, Q., Rao, W., Li, Y., Zhi, J., & Yang, B. (2025). Size effect and damage mechanism of Double–Double open-hole composite laminates. Composites Science and Technology, 266, 111158. https://doi.org/10.1016/j.compscitech.2025.111158
Liu, Y., Tan, Q., Lin, H., Wang, J., Wang, K., Peng, Y., & Yao, S. (2023). Integrated design and additive manufacturing of lattice-filled multi-cell tubes. Composites Science and Technology, 243, 110252. https://doi.org/10.1016/j.compscitech.2023.110252
M. Awd Allah, M., Abdel-Aziem, W., & A. Abd El-baky, M. (2023). Collapse Behavior and Energy Absorbing Characteristics of 3D-Printed Tubes with Different Infill Pattern Structures: An Experimental Study. Fibers and Polymers, 24(7), 2609–2622. https://doi.org/10.1007/s12221-023-00207-7
Özen, İ., Gedikli, H., & Aslan, M. (2023). Experimental and numerical investigation on energy absorbing characteristics of empty and cellular filled composite crash boxes. Engineering Structures, 289, 116315. https://doi.org/10.1016/j.engstruct.2023.116315
Saeed, G., Abdo, G. M., Gad, S. I., & Ibrahim, A. (2025). Investigating the Effect of Infill Parameters on the Compressive Strength and Energy Absorption Properties of 3D-Printed Polylactic Acid (PLA) Material. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-025-12913-9
Turan, K., & Erkek, B. (2019). Termal Yaşlandırılmış Kompozit Levhaların Burkulma Davranışlarının Araştırılması. DÜMF Mühendislik Dergisi, 10(2), 655–661. https://doi.org/10.24012/dumf.565715
Wang, G., Zhang, Y., Zheng, Z., Chen, H., & Yu, J. (2022). Crashworthiness design and impact tests of aluminum foam-filled crash boxes. Thin-Walled Structures, 180, 109937. https://doi.org/10.1016/j.tws.2022.109937
Xie, S., Wang, H., Jing, K., & Feng, Z. (2022). Mechanical properties of Nomex honeycombs filled with tubes of carbon fibre reinforced vinyl ester resin composites. Thin-Walled Structures, 180, 109933. https://doi.org/10.1016/j.tws.2022.109933
Zhang, X. G., Jiang, W., Zhang, Y., Luo, C., Zhang, X. Y., Han, D., Hao, J., Teng, X. C., Xie, Y. M., & Ren, X. (2022). Energy absorption properties of composite tubes with hexagonal and re-entrant honeycomb fillers. Construction and Building Materials, 356, 129298. https://doi.org/10.1016/j.conbuildmat.2022.129298

Ayrıntılar

Birincil Dil

İngilizce

Konular

Katı Mekanik, Malzeme Tasarım ve Davranışları, Kompozit ve Hibrit Malzemeler

Bölüm

Araştırma Makalesi

Yazarlar

Baran Erkek ^*
0000-0003-0756-0513
Türkiye

Ertan Kösedağ
0000-0002-5580-0414
Türkiye

Yayımlanma Tarihi

3 Eylül 2026

Gönderilme Tarihi

26 Şubat 2026

Kabul Tarihi

23 Haziran 2026

Yayımlandığı Sayı

Yıl 2026 Cilt: 29 Sayı: 3

IZ

https://izlik.org/JA75FS55LS

Kaynak Göster

RIS / Bibtex

APA

Erkek, B., & Kösedağ, E. (2026). EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 29(3), 1110-1121. https://izlik.org/JA75FS55LS

AMA

1.Erkek B, Kösedağ E. EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29(3):1110-1121. https://izlik.org/JA75FS55LS

Chicago

Erkek, Baran, ve Ertan Kösedağ. 2026. “EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 (3): 1110-21. https://izlik.org/JA75FS55LS.

EndNote

Erkek B, Kösedağ E (01 Eylül 2026) EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 3 1110–1121.

IEEE

[1]B. Erkek ve E. Kösedağ, “EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES”, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 3, ss. 1110–1121, Eyl. 2026, [çevrimiçi]. Erişim adresi: https://izlik.org/JA75FS55LS

ISNAD

Erkek, Baran - Kösedağ, Ertan. “EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29/3 (01 Eylül 2026): 1110-1121. https://izlik.org/JA75FS55LS.

JAMA

1.Erkek B, Kösedağ E. EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29:1110–1121.

MLA

Erkek, Baran, ve Ertan Kösedağ. “EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 3, Eylül 2026, ss. 1110-21, https://izlik.org/JA75FS55LS.

Vancouver

1.Baran Erkek, Ertan Kösedağ. EFFECTS OF 3D PRINTED PLA FILLER ON THE LATERAL CRUSHING BEHAVIOR OF NATURAL FIBER JUTE REINFORCED COMPOSITE TUBES. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi [Internet]. 01 Eylül 2026;29(3):1110-21. Erişim adresi: https://izlik.org/JA75FS55LS