Araştırma Makalesi

MISIR KOÇANINDA SÜLFÜRİK ASİT, HİDROJEN PEROKSİT VE ULTRASOUND ÖN İŞLEMLERİ İLE ÇÖZÜNMÜŞ ŞEKER ÜRETİMİNİN OPTİMİZASYONU

Cilt: 22 Sayı: 4 30 Aralık 2019
PDF İndir
EN TR

MISIR KOÇANINDA SÜLFÜRİK ASİT, HİDROJEN PEROKSİT VE ULTRASOUND ÖN İŞLEMLERİ İLE ÇÖZÜNMÜŞ ŞEKER ÜRETİMİNİN OPTİMİZASYONU

Öz

Bu çalışmada, Niğde ve çevre illerden temin edilen mısır koçanlarında, biyoyakıt potansiyelinin arttırılmasında fizikokimyasal (H2O2, H2O2+US, H2O2, H2O2+US) önişlemlerin etkisi belirlenmiştir. Uygulanan önişlemlerin optimizasyonu için istatistiki metot RSM (Response Surface Methods) Box-Behnken tasarımı kullanılmıştır. Tasarımda beklenen yanıtlar Toplam Şeker (TŞ) ve İndirgen Şeker (İŞ) konsantrasyonudur. Model sonuçlarına göre; H2SO4 önişlemi için 13,13 g/L maksimum TŞ, % 3 asit konsantrasyonu, 100 °C ve 180 dakika koşullarında;. 7,7 g/L maksimum İŞ ise % 5 asit konsantrasyonu, 100 °C ve 180 dakikada elde edilmiştir.  H2SO4-US önişlemi için 10,72 g/L g/L maksimum TŞ, % 3 asit konsantrasyonu, 100 kJ/kgDM US dozu ve 30 dakika koşullarında; 3,16 g/L’ye maksimum İŞ ise % 4,24 asit konsantrasyonu, 100 kJ/kgDM US dozu ve 27,7 dakikada elde edilmiştir. H2O2 önişleminde 1,70 g/L maksimum TŞ %  0,15 H2O2, 0,38 mesh ve % 1,98 katı oranı koşullarında; 1,24 g/L’ye maksimum İŞ % 0,10 H2O2, 0,61 mesh ve % 2 katı oranı koşullarında elde edilmiştir. H2O2-US önişlemi için 5,70 g/L maksimum TŞ % 1 H2O2, 60 kJ/kgDM US dozu ve 5 dakika koşullarında;  1,11 g/L maksimum İŞ % 0,1 H2O2, 20 kJ/kgDM US dozu ve 17,5 dakika koşullarında elde edilmiştir. Çalışma sonucunda, lignoselülozik yapı çözünebilir yapıya dönüştürülmüştür.

Anahtar Kelimeler

Destekleyen Kurum

Niğde Ömer Halisdemir Üniversitesi

Proje Numarası

FEB2015/42-BAGEP

Teşekkür

Bu çalışma, Niğde Ömer Halisdemir Üniversitesi Bilimsel Araştırma Projeleri Koordinasyon Birimi tarafından FEB2015/42-BAGEP kodlu projesi olarak desteklenmiştir.

Kaynakça

  1. Adıgüzel, A. O., “Lignoselülozik materyallerden biyoetanol üretimi için kullanılan ön-muamele ve hidroliz yöntemleri”. SAU J. Sci., 17(3): p. 381-397, 2013.Alvira, P.,Tomás-Pejó E., Ballesteros M., Negro M.J., “Pretreatment technologies for an efficient bioethanol production process based on enzymatic hydrolysis: A Review”. Bioresource Technology, 101(13): p. 4851-4861, 2010.Badiesi, M., Asim N., Jahim J.M., Sopian K.,“Comparison of Chemical Pretreatment Methods for Cellulosic Biomass”. APCBEE Procedia, 9: p. 170-174, 2014.Balat, M., Balat, H., Öz, C., “Progress in bioethanol processing”, Progress in Energy and Combustion Science, 551-573, 2007.Behera, S., Arora, R., Nandhagopal N., Kumar S., “Importance of chemical pretreatment for bioconversion of lignocellulosic biomass”. Renewable & Sustainable Energy Reviews, 36: p. 91-106, 2014.Behera, S., Mohanty R.C., Ray R.C.. “Ethanol production from mahula (Madhuca latifolia L.) flowers with immobilized cells of Saccharomyces cerevisiae in Luffa cylindrica L. sponge discs”. Applied Energy, 88(1): p. 212-215, 2011.Bertheta M.A., Angellier-Coussya H., Machado D., Hilliou L., Staebler A., Vicente A., Gontard N., “Exploring the potentialities of using lignocellulosic fibres derived from three food by-products as constituents of biocomposites for food packaging”. Industrial Crops and Products, 69: p. 110-122, 2015.Borrion, A.L., McManus M.C., Hammond G.P.. “Environmental life cycle assessment of bioethanol production from wheat straw”. Biomass & Bioenergy, 47: p. 9-19, 2012.BP Statistical Review of World Energy What’s new in renewables. International Gas Engineering and Management, 42(9): p. 25-25, 2002.Chandra, R.P., Bura, R., Mabee, W. E., Berlin, A., Pan, X., Saddler, J. N. “Substrate pretreatment: The key to effective enzymatic hydrolysis of lignocellulosics?” Biofuels, 108: p. 67-93, 2007.Chang, V.S., Holtzapple M.T.. “Fundamental factors affecting biomass enzymatic reactivity”. Applied Biochemistry and Biotechnology, 84-6: p. 5-37, 2000.Deniz E., Yeşilören, G., İşçi N. Ö., “Türkiye’de Gıda Endüstrisi Kaynaklı Biyokütle ve Biyoyakıt Potansiyeli”. Gıda, 40(1): p. 47-54, 2015.Drapcho M.C., Nghim N.P., Walker T. “Biofuels Engineering Process Technology”. McGraw-Hill, New York, 2008.FAO, 2014. Food and Agriculture Organization of the United Nations Web Page, AQUASTAT database. http://fao.org/nr/aquastat [Erişim: 15 Agustos 2019].Gizlenci, Ş., Acar M. Şahin, M. “Türkiye’de Yenilenebilir Enerji Kaynaklarının (Biyodize, biyoetanol, Biyokütle) Projeksiyonu”. Tarım Makinaları Bilimi Dergisi, 8(3): p. 337-344, 2012.Goldemberg, J., “Ethanol for a sustainable energy future”. Science, 315(5813): p. 808-810, 2007.Gouveia, L. and Oliveira. A.C., “Microalgae as a raw material for biofuels production”. Journal of Industrial Microbiology & Biotechnology, 36(2): p. 269-274, 2009.Guerrero, A.B., Ballesterosb, I. and M. Ballesteros. “Optimal conditions of acid-catalysed steam explosion pretreatment of banana lignocellulosic biomass for fermentable sugar production”. J. Chem Technol Biotechnol, 92: p. 2351-2359, 2017.Haque, M.A., Nath Barman D, Kang TH, Kim MK, Kim J, Kim H, Yun HD. “Effect of Dilute Alkali on Structural Features and Enzymatic Hydrolysis of Barley Straw (Hordeum vulgare) at Boiling Temperature with Low Residence Time”. Journal of Microbiology and Biotechnology, 22(12): p. 1681-1691, 2012.Harmsen, P.F.H, Huijgen, W, Bermudez, L, Bakker, R., “Litaratüre Review of Physical and Chemical Pretreatment Procces for Lignocellulosic Biomass”. Bıosynerg, 10(013), 2010.Isroi, R.M., Syamsiah S., Niklasson C., Cahyanto M.N., Ludquist K., Taherzadeh M.J., “Biological Pretreatment of Lignocelluloses with White-Rot Fungi and Its Applications: A Review”. Bioresources, 6(4): p. 5224-5259, 2011.Jovana R., Jelena D., Siniša D., Stevan P., “Bioethanol Production from Intermediate Products of Sugar Beet Processing with Different Types of Saccharomyces Cerevisae”. Chemical Industry & Chemical Engineering Quarterly, 15(1): p. 13-16, 2009.Karunanithy, C., Muthukumarappan K.., “Influence of extruder and feedstock variables on torque requirement during pretreatment of different types of biomass - A response surface analysis”. Biosystems Engineering, 109(1): p. 37-51, 2011a.Karunanithy, C., Muthukumarappan. K., “Optimization of alkali soaking and extrusion pretreatment of prairie cord grass for maximum sugar recovery by enzymatic hydrolysis”. Biochemical Engineering Journal, 54(2): p. 71-82, 2011b.Kim, J.S., Lee Y.Y., Kim T.H., “A review on alkaline pretreatment technology for bioconversion of lignocellulosic biomass”. Bioresource Technology, 199: p. 42-48, 2016.Kuhar, S., Nair L.M., Kuhad R.C., “Pretreatment of lignocellulosic material with fungi capable of higher lignin degradation and lower carbohydrate degradation improves substrate acid hydrolysis and the eventual conversion to ethanol”. Canadian Journal of Microbiology, 54(4): p. 305-313, 2008.Mood S.H.,Golfeshan A.H., Tabatabaei M., Jouzani G.J., HassanNajafi G., Gholami M., Ardjmand M, “Lignocellulosic biomass to bioethanol, a comprehensive review with a focus on pretreatment”. Renewable & Sustainable Energy Reviews, 27: p. 77-93, 2013.Mosier, N., Wyman, C.,Dale, B., Elander, R., Lee, Y. Y., Holtzapple, M., Ladisch, M. et al., “Features of promising technologies for pretreatment of lignocellulosic biomass”. Bioresource Technology, 96(6): p. 673-686, 2005.Parisi, F. “Advances in lignocellulosic hydrolysis and in the utilization of the hydrolysates”, Advances in Biochemical Engineering 38 53–87, 1989.Radeva G., Valchev I., Petrın S., Valcheva E., Tsekova P. “Comparative Kinetic Analysis of Enzyme Hydrolysis of Steam-Exploded Wheat Straw”. Cellulose Chemistry and Technology, 46(1-2): p. 61-67, 2012.Sanchez, C., “Lignocellulosic residues: Biodegradation and bioconversion by fungi”. Biotechnology Advances, 27(2): p. 185-194, 2009.Saritha, M., A. Arora, Lata, “Biological Pretreatment of Lignocellulosic Substrates for Enhanced Delignification and Enzymatic Digestibility”. Indian Journal of Microbiology, 52(2): p. 122-130, 2012.Singh R., Shukla A., Tiwari S., Srivastava M., “A review on delignification of lignocellulosic biomass for enhancement of ethanol production potential”. Renewable & Sustainable Energy Reviews, 32: p. 713-728, 2014.Singh, P., Suman, A., Tiwari, P., Arya, N., Gaur, A., Shrivastava, A. K., “Biological pretreatment of sugarcane trash for its conversion to fermentable sugars”. World Journal of Microbiology & Biotechnology, 24(5): p. 667-673, 2008.Sinha, P. Pandey A., “Improved hydrogen production by lab isolate: a novel organism for waste management and source of renewable energy”. New Biotechnology, 25: p. S273-S273, 2009.Sun, Y. Cheng. YJ. “Hydrolysis of lignocellulosic materials for ethanol production: a Review”. Bioresource Technology, 83(1): p. 1-11, 2002.Talebnia, F., Karakashev D., Angelidaki I.. “Production of bioethanol from wheat straw: An overview on pretreatment, hydrolysis and fermentation”. Bioresource Technology, 101(13): p. 4744-4753, 2010.Toprak Mahsulleri Ofisi, “2018-Hububat Sektör Raporu”, 2018Türkiye İstatistik Kurumu (TUİK), “Bitkisel üretim istatistikleri raporu”, 2018Usal G., “Buğday Tarlası Atıklarından Alkali Hidroliz İle Fenolik Maddelerin Üretimi ve Üretim Koşullarının Optimizasyonu”, Yayınlanmamış Yüksek Lisans Tezi Gaziosmanpaşa Üniversitesi, Gıda Mühendisliği Anabilim Dalı, Tokat, 2014.Üçgül. İ., Akgül G., “Biomass Technology”. Journal of Yekarum, 1(1): p. 3-11, 2010.Wang, L., Littlewood J., Murphy R.J.“Environmental sustainability of bioethanol production from wheat straw in the UK”. Renewable & Sustainable Energy Reviews, 28: p. 715-725, 2013.Wong, A., Zhang, H., Kumar A. “Life cycle water footprint of hydrogenation-derived renewable diesel production from lignocellulosic biomass”. Water Research, 102: p. 330-345, 2016.

Ayrıntılar

Birincil Dil

Türkçe

Konular

Çevre Mühendisliği

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

30 Aralık 2019

Gönderilme Tarihi

11 Kasım 2019

Kabul Tarihi

4 Aralık 2019

Yayımlandığı Sayı

Yıl 2019 Cilt: 22 Sayı: 4

Kaynak Göster

APA
Deveci, E. Ü., Gönen, Ç., & Çetin, G. (2019). MISIR KOÇANINDA SÜLFÜRİK ASİT, HİDROJEN PEROKSİT VE ULTRASOUND ÖN İŞLEMLERİ İLE ÇÖZÜNMÜŞ ŞEKER ÜRETİMİNİN OPTİMİZASYONU. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 22(4), 183-198. https://doi.org/10.17780/ksujes.645375

Cited By