Araştırma Makalesi

ENDÜSTRİYEL ALANLARDA İÇ ORTAM HAVA KİRLETİCİLERİNDEN PARTİKÜL MADDENİN ELEKTRON MİKROSKOBU İLE KAYNAK ANALİZİ: TEKSTİL ENDÜSTRİSİ ÖRNEĞİ

Cilt: 23 Sayı: 3 1 Eylül 2020
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi Kapak
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
PDF İndir
EN TR

SOURCE ANALYSIS PARTICULE MATTER FROM INDOOR AIR POLLUTANTS IN INDUSTRIAL AREAS USING SEM: CASE OF TEXTILE INDUSTRY

Abstract

Nowadays, people spend a significant part of a day either in closed or semi-closed environments. Therefore, indoor air quality has become a very important research topic in recent years. Indoor air varies according to the type of activity performed in these environments. These activities; heating and cooling, population number, building materials, smoking and so on. In addition, transports from the outdoor atmosphere to the indoor spaces have an effect on the components of the indoor environment. Pollutants, which are most likely to be found indoors, can be in various phases, including solid (particulate matter (PM), powder), liquid (mist, spray) and gas (organic gases, carbon monoxide CO, Volatile Organic Compounds (VOC)). In this study, source analysis of PM, which is determined in textile industry indoor environment, was carried out. Source analyzes were accomplished by SEM electron microscopic method and the source estimations were made according to the shapes of PM obtained by microscopic imaging. According to the results, it is concluded that most of the indoor PM group pollutants are originated from textile fibers and the rest may be PM caused by outdoor traffic.

Keywords

Teşekkür

Katkılarından dolayı Kahramanmaraş Sütçü İmam Üniversitesi ÜSKİM'e teşekkür ederiz.

Kaynakça

  1. Akal, D. (2013). İç Ortam Hava Kirliliği ve Çalışanlara Olumsuz Etkileri. ÇSGB Çalışma Dünyası Dergisi, 1(1), 112–119.
  2. ASHRAE. (2003). Indoor Environmental Health. Atlanta, USA: ASHRAE Handbook CD, Fundamentals-2001.
  3. Casuccio, G. S., Schlaegle, S. F., Lersch, T. L., Huffman, G. P., Chen, Y., & Shah, N. (2004). Measurement of fine particulate matter using electron microscopy techniques. Fuel Processing Technology. https://doi.org/10.1016/j.fuproc.2003.11.026
  4. Koval, S., Krahenbuhl, G., Warren, K., & O’Brien, G. (2018). Optical microscopy as a new approach for characterising dust particulates in urban environment. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2018.06.038
  5. Ličbinský, R., Frýbort, A., Huzlík, J., Adamec, V., Effenberger, K., Mikuška, P., … Křůmal, K. (2010). Usage of Scanning Electron Microscopy for Particulate Matter Sources Identification. Transactions on Transport Sciences. https://doi.org/10.2478/v10158-010-0019-8
  6. Štrbová, K., Raclavská, H., & Bílek, J. (2017). Impact of fugitive sources and meteorological parameters on vertical distribution of particulate matter over the industrial agglomeration. Journal of Environmental Management. https://doi.org/10.1016/j.jenvman.2017.06.001
  7. USEPA. (2004a). Air Quality Criteria for Particulate Matter. Air Quality Criteria for Particulate Matter, I(October), 900. Retrieved from http://cfpub.epa.gov/ncea/risk/recordisplay.cfm?deid=87903#tab-3
  8. USEPA, U. S. E. P. A. (2004b). Air Quality Criteria for Particulate Matter October 2004, Volume 2. Air Quality Criteria for Particulate Matter, II(October), 1148. Retrieved from file:///C:/Users/Laíssa/Downloads/VOL_II_FINAL_PM_AQCD_OCT2004.PDF

Ayrıntılar

Birincil Dil

Türkçe

Konular

Çevre Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Celal Berk
0000-0001-6265-0779
Türkiye

Sefa Kaya
0000-0002-4186-3385
Türkiye

Yayımlanma Tarihi

1 Eylül 2020

Gönderilme Tarihi

20 Nisan 2020

Kabul Tarihi

19 Ağustos 2020

Yayımlandığı Sayı

Yıl 1970 Cilt: 23 Sayı: 3

DOI

https://doi.org/10.17780/ksujes.723802

IZ

https://izlik.org/JA75KJ83YU

Kaynak Göster

RIS / Bibtex
APA
Babaoğlu, N., Berk, C., & Kaya, S. (2020). ENDÜSTRİYEL ALANLARDA İÇ ORTAM HAVA KİRLETİCİLERİNDEN PARTİKÜL MADDENİN ELEKTRON MİKROSKOBU İLE KAYNAK ANALİZİ: TEKSTİL ENDÜSTRİSİ ÖRNEĞİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 23(3), 164-169. https://doi.org/10.17780/ksujes.723802