Araştırma Makalesi

Investigation of the effect of polymeric and non-polymeric materials in the hole transfer layer on the performance of perovskite solar cell

Cilt: 25 Sayı: 1 3 Mart 2022
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi Kapak
Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi
PDF İndir
EN TR

Investigation of the effect of polymeric and non-polymeric materials in the hole transfer layer on the performance of perovskite solar cell

Abstract

In recent decades, due to advances in various industries, the use of renewable energy sources has increased significantly. Solar cells are one of the important tools in the use of renewable energies. Between the different types of solar cells, recently, perovskite solar cells, because of some advantages like low costs of materials used in their fabrication, simple manufacturing process, and high conversion efficiency, have gained the attention of many researchers. Emerging technology and recent research activities have helped perovskite solar cells to achieve high efficiency, which is highly dependent on the components and structures of the solar cell system. One way to achieve high efficiency is to use polymeric and non-polymeric materials as electron transporters (ETMs), hole transporters (HTMs), or as a stimulus to increase the performance durability of perovskite solar cells. Simulation tool is a very effective tool for designing solar cells. In this study, by using COMSOL Multiphysics software, the effect of using different hole transfer layers, both polymeric and non-polymeric, has been investigated. For this purpose, three HTM layers (Spiro-OMETAD, CuSCN, P3HT) have been investigated. The results represented that the efficiencies for these three materials were (16.8%, 15.7%, 12%), respectively, and Spiro-OMETAD has been more efficient.

Keywords

Kaynakça

  1. Deceglie, M. G., Ferry, V. E., Alivisatos, A. P., & Atwater, H. A. (2012). Design of nanostructured solar cells using coupled optical and electrical modeling. Nano letters, 12(6), 2894-2900.
  2. Gavrilov, S. A., Dronov, A. A., Shevyakov, V. I., Belov, A. N., & Poltoratskii, E. A. (2009). Ways to increase the efficiency of solar cells with extremely thin absorption layers. Nanotechnologies in Russia, 4(3), 237-243.
  3. Jaffe, J. E., Kaspar, T. C., Droubay, T. C., Varga, T., Bowden, M. E., & Exarhos, G. J. (2010). Electronic and defect structures of CuSCN. The Journal of Physical Chemistry C, 114(19), 9111-9117.
  4. Karimi, E., & Ghorashi, S. M. B. (2017). Simulation of perovskite solar cell with P 3 HT hole-transporting materials. Journal of Nanophotonics, 11(3), 032510.
  5. Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009). Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 131(17), 6050-6051.
  6. Minemoto, T., & Murata, M. (2014). Device modeling of perovskite solar cells based on structural similarity with thin film inorganic semiconductor solar cells. Journal of applied physics, 116(5), 054505.
  7. OZCALIK, H. R., YILMAZ, S., & KILIC, E. (2013). Güneş Pilinin Bir Diyotlu Eşdeğer Devre Yardımıyla Matematiksel Modelinin Çıkartılması ve Parametrelerinin İncelenmesi. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 16(1), 23-29.
  8. Pattanasattayavong, P., Ndjawa, G. O. N., Zhao, K., Chou, K. W., Yaacobi-Gross, N., O'Regan, B. C., ... & Anthopoulos, T. D. (2013). Electric field-induced hole transport in copper (I) thiocyanate (CuSCN) thin-films processed from solution at room temperature. Chemical Communications, 49(39), 4154-4156.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Elektrik Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Yayımlanma Tarihi

3 Mart 2022

Gönderilme Tarihi

20 Ağustos 2021

Kabul Tarihi

3 Ocak 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 25 Sayı: 1

DOI

https://doi.org/10.17780/ksujes.982464

IZ

https://izlik.org/JA78JZ56RK

Kaynak Göster

RIS / Bibtex
APA
Delibaş, N., Moradi, A., Hosseini, S., Maleki, M., Bahramgour, M., & Niaie, A. (2022). Investigation of the effect of polymeric and non-polymeric materials in the hole transfer layer on the performance of perovskite solar cell. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 25(1), 1-6. https://doi.org/10.17780/ksujes.982464

Cited By

Mathematical Modeling Application in Energy Conversion and Energy Storage

Journal of Mathematical Sciences and Modelling

https://doi.org/10.33187/jmsm.1126076