HARDOX 450, ALUMİNYUM BALPETEĞİ VE ARAMİD/EPOKSİ TABAKALI HİBRİT ZIRH PLAKALARININ BALİSTİK DAVRANIŞININ İNCELENMESİ

Mehmet Özer; Kaan Ferikel; İbrahim Kutay Yılmazçoban; Tayfur Kerem Demircioğlu; Fatih Balikoglu; Can Çivi

doi:10.17780/ksujes.1489410

EN TR

INVESTIGATION OF BALLISTIC BEHAVIOR OF HARDOX 450, ALUMINIUM HONEYCOMB AND ARAMID/EPOXY LAYER HYBRID ARMOUR PLATES

Abstract

In this research, the ballistic performance of single and multiple hybrid armour systems made of Hardox 450 steel, Aramid/epoxy laminate composite, and aluminium honeycomb materials was studied. Ballistic testing was conducted on test plates using 7.62 full metal jacket bullets at a muzzle velocity of 833 ± 15 m/s. The sheets for ballistic testing are 250×250 mm and vary in thickness based on material configuration. Test plates have been fixed on four sides. The ballistic impact was achieved by firing perpendicular to the plate's striking surface. In experimental experiments, the hybrid armour design consisting of 4 mm Hardox 450, 24 layers of Aramid/epoxy laminate composite, and 10 mm Aluminium honeycomb, depending on the impacting surface, could not demonstrate ballistic resistance to impact energy. On the other hand, the 6 mm Hardox 450 armour plate used in a single structure showed ballistic resistance to impact energy. Finite element analysis was carried out using the open-time integration method in LS-Dyna software; the amount of back face signature and absorbed energy values were compared.

Keywords

Kaynakça

Abdullah, S., Abdullah, M., & Jamil, W. M. (2020). Ballistic performance of the steel-aluminium metal laminate panel for armoured vehicle. Journal of Mechanical Engineering Sciences, 14(1), 6452-6460. doi:https://doi.org/10.15282/jmes.14.1.2020.20.0505
Arslan, K., Gunes, R., Apalak, M. K., & Reddy, J. N. (2017). Experimental tests and numerical modeling of ballistic impact on honeycomb sandwich structures reinforced by functionally graded plates. Journal of Composite Materials, 51(29), 4009-4028. doi: https://doi.org/10.1177/0021998317695423
Bekci, M. L., Canpolat, B. H., Usta, E., Güler, M. S., & Cora, Ö. N. (2021). Ballistic performances of Ramor 500 and Ramor 550 armor steels at mono and bilayered plate configurations. Engineering Science Technology, an International Journal, 24(4), 990-995. doi:https://doi.org/10.1016/j.jestch.2021.01.001
Børvik, T., Dey, S., & Clausen, A. (2009). Perforation resistance of five different high-strength steel plates subjected to small-arms projectiles. International Journal of Impact Engineering, 36(7), 948-964. doi:https://doi.org/10.1016/j.ijimpeng.2008.12.003
Gunes, R., Arslan, K., Apalak, M. K., & Reddy, J. N. (2019). Ballistic performance of honeycomb sandwich structures reinforced by functionally graded face plates. Journal of Sandwich Structures & Materials, 21(1), 211-229. doi: https://doi.org/10.1177/109963621668946
Hazell, P. J. (2022). Armour: materials, theory, and design: CRC press.
Hub, J., & Kneys, P. (2013). 3D Simulation Analysis of Aircraft of Aircreft Protection Material Impacting by 7.62 mm Ammunition. University Review, 7(3).
Hub, J., & Komenda, J. (2009). Ballistic's Resistance of Steel Plate Hardox upon Impact of Non Penetrating Projectiles. Advances in Military Technology, 4(2), 79-91.

Kartikeya, K., Chouhan, H., Ram, K., Prasad, S., & Bhatnagar, N. (2022). Ballistic evaluation of steel/UHMWPE composite armor system against hardened steel core projectiles. International Journal of Impact Engineering, 164, 104211. doi:https://doi.org/10.1016/j.ijimpeng.2022.104211
Khaire, N., Tiwari, G., Patel, V., & Iqbal, M. A. (2023). Assessment of the ballistic response of honeycomb sandwich structures subjected to offset and normal impact. Defence Technology, 28, 56-73. doi: https://doi.org/10.1016/j.dt.2022.12.018
Kraus, A., Kraus, E., & Shabalin, I. (2019). Modelling of the processes of impact of a projectile with elements of individual defence. Paper presented at the EPJ Web of Conferences.
Lenihan, D., Ronan, W., O'Donoghue, P. E., & Leen, S. B. (2019). A review of the integrity of metallic vehicle armour to projectile attack. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design Applications, 233(1), 73-94. doi:https://doi.org/10.1177/1464420718759704
Mohotti, D., Ngo, T., & Mendis, P. (2011). Numerical simulation of impact and penetration of ogvial shaped projectiles through steel plate structures.
Palta, E., Gutowski, M., & Fang, H. (2018). A numerical study of steel and hybrid armor plates under ballistic impacts. International Journal of Solids Structures, 136, 279-294. doi:https://doi.org/10.1016/j.ijsolstr.2017.12.021
Peng, L., Tan, M., Zhang, X., Han, G., Xiong, W., Al Teneiji, M., & Guan, Z. (2022). Investigations of the ballistic response of hybrid composite laminated structures. Composite Structures, 282, 115019. doi:https://doi.org/10.1016/j.compstruct.2021.115019
Popławski, A., Kędzierski, P., & Morka, A. (2020). Identification of Armox 500T steel failure properties in the modeling of perforation problems. Materials Design, 190, 108536. doi:https://doi.org/10.1016/j.matdes.2020.108536
Rathod, S., Khaire, N., & Tiwari, G. (2022). A comparative study on the ballistic performance of aramid and aluminum honeycomb sandwich strcutures. Composite Structures, 299, 116048. doi: https://doi.org/10.1016/j.compstruct.2022.116048
Senthil, K., & Iqbal, M. A. (2021). Prediction of superior target layer configuration of armour steel, mild steel and aluminium 7075-T651 alloy against 7.62 AP projectile. Paper presented at the Structures. https://doi.org/10.1016/j.istruc.2020.06.010
SSAB. (2024). https://www.ssab.com/api/sitecore/Datasheet/Get? key=e95fe73946d64960a9c462504235f6bd_tr-tr / Accessed 24.05.24.
Stewart, J. K. (1985). Ballistic resistant protective materials—NIJ standard 0108.01. Washington: National Institute of Justice.
Tepeduzu, B., & Karakuzu, R. (2019). Ballistic performance of ceramic/composite structures. Ceramics International, 45(2), 1651-1660. doi: https://doi.org/10.1016/j.ceramint.2018.10.042
Zhang, Q. N., Zhang, X. W., Lu, G. X., & Ruan, D. (2018). Ballistic impact behaviors of aluminum alloy sandwich panels with honeycomb cores: An experimental study. Journal of Sandwich Structures & Materials, 20(7), 861-884. doi: https://doi.org/10.1177/1099636216682166

Ayrıntılar

Birincil Dil

Türkçe

Konular

Balistik Sistemleri

Bölüm

Araştırma Makalesi

Yazarlar

Mehmet Özer
0000-0002-6212-1217
Türkiye

Kaan Ferikel
0009-0006-1616-0174
Türkiye

İbrahim Kutay Yılmazçoban
0000-0002-9886-5533
Türkiye

Tayfur Kerem Demircioğlu ^*
0000-0002-0518-0739
Türkiye

Fatih Balikoglu
0000-0003-3836-5569
Türkiye

Can Çivi
0000-0002-5302-9072
Türkiye

Yayımlanma Tarihi

3 Aralık 2024

Gönderilme Tarihi

24 Mayıs 2024

Kabul Tarihi

1 Ağustos 2024

Yayımlandığı Sayı

Yıl 1970 Cilt: 27 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.1489410

IZ

https://izlik.org/JA27XF93XY

Kaynak Göster

RIS / Bibtex

APA

Özer, M., Ferikel, K., Yılmazçoban, İ. K., Demircioğlu, T. K., Balikoglu, F., & Çivi, C. (2024). HARDOX 450, ALUMİNYUM BALPETEĞİ VE ARAMİD/EPOKSİ TABAKALI HİBRİT ZIRH PLAKALARININ BALİSTİK DAVRANIŞININ İNCELENMESİ. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 27(4), 1621-1632. https://doi.org/10.17780/ksujes.1489410

INVESTIGATION OF BALLISTIC BEHAVIOR OF HARDOX 450, ALUMINIUM HONEYCOMB AND ARAMID/EPOXY LAYER HYBRID ARMOUR PLATES

Abstract

Keywords