Derleme

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW

Cilt: 29 Sayı: 3 3 Eylül 2026

Hasan Onur Tan ^*

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi

TR EN

SÜRTÜNME KARIŞTIRMA KAYNAĞI İLE BİRLEŞTİRİLEN 7XXX SERİSİ ALÜMİNYUM ALAŞIMLARININ MİKROYAPISAL GELİŞİMİ VE MEKANİK PERFORMANSI: BİR DERLEME

Öz

Yüksek mukavemetli 7XXX serisi alüminyum alaşımları, üstün mukavemet-ağırlık oranları, kırılma tokluğu ve yorulma dirençleri nedeniyle havacılık yapılarında yaygın olarak kullanılmaktadır. Ancak bu alaşımların katılaşmayla ilgili hatalara olan duyarlılığı, geleneksel ergitme kaynak tekniklerinin etkinliğini sınırlandırmaktadır. Erime sıcaklığının altında gerçekleştirilen katı hal birleştirme yöntemi olan Sürtünme Karıştırma Kaynağı (SKK), katılaşma hatalarını bastırırken mikroyapısal kararlılığı önemli ölçüde etkileyen karmaşık termo-mekanik döngüler ortaya koyarak uygun bir alternatif sunmaktadır. Bu derleme çalışması, sürtünme karıştırma kaynağı ile birleştirilen 7XXX serisi alüminyum alaşımlarının mikroyapısal evrimini ve mekanik performansını eleştirel bir bakış açısıyla değerlendirmektedir. Çalışmada özellikle metastabil η′ (MgZn₂-esaslı) güçlendirici çökeltilerin davranışı; Ana Malzeme (BM), Isıdan Etkilenen Bölge (HAZ), Termo-Mekanik Olarak Etkilenen Bölge (TMAZ) ve Karıştırma Bölgesi (SZ) gibi karakteristik kaynak bölgeleri boyunca ayrıntılı olarak incelenmiştir. Kaynaktan kaynaklanan ısıl etkinin çökelti çözünmesi, irileşmesi ve aşırı yaşlanma üzerindeki etkisi; kaynak bölgesi yumuşaması ve bağlantı verimliliğinin gelişimiyle ilişkilendirilerek sistematik biçimde ele alınmaktadır. Ayrıca temel işlem parametrelerinin çökelti kararlılığı ve mekanik davranış üzerindeki rolü de incelenmiştir. Literatürdeki güncel bulguların bütüncül bir değerlendirmesiyle bu çalışma, kaynak heterojenliğinden sorumlu temel metalurjik mekanizmaları ortaya koymakta ve havacılık sınıfı 7XXX serisi alüminyum alaşımlarında çökelme kinetiği ile süreç optimizasyonuna ilişkin mevcut araştırma boşluklarını ve gelecekteki araştırma gereksinimlerini belirlemektedir.

Anahtar Kelimeler

MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW

Öz

High-strength 7XXX series aluminum alloys are extensively used in aerospace structures due to their superior strength-to-weight ratio, fracture toughness, and fatigue resistance. However, their sensitivity to solidification-related defects limits the effectiveness of conventional fusion welding techniques. Friction Stir Welding (FSW), a solid-state joining process performed below the melting temperature, provides a viable alternative by suppressing solidification defects while introducing complex thermo-mechanical cycles that significantly affect microstructural stability. This review critically evaluates the microstructural evolution and mechanical performance of friction stir welded 7XXX aluminum alloys, with particular emphasis on the behavior of metastable η′ (MgZn₂-based) strengthening precipitates across the characteristic weld regions: Base Material (BM), Heat-Affected Zone (HAZ), Thermo-Mechanically Affected Zone (TMAZ), and Stir Zone (SZ). The influence of welding-induced thermal exposure on precipitate dissolution, coarsening, and overaging is systematically discussed in relation to the development of weld-zone softening and joint efficiency. Furthermore, the role of key process parameters in controlling precipitation stability and mechanical response is examined. By integrating current findings from the literature, this study highlights the governing metallurgical mechanisms responsible for weld heterogeneity and identifies remaining research challenges associated with precipitation kinetics and process optimization in aerospace-grade 7XXX aluminum alloys.

Anahtar Kelimeler

Kaynakça

Ahmed, M. M. Z., Ataya, S., Seleman, M. M. E., Mahdy, A. M. A., Alsaleh, N. A., & Ahmed, E. (2021). Heat input and mechanical properties investigation of friction stir welded AA5083/AA5754 and AA5083/AA7020. Metals, 11(1), 68. https://doi.org/10.3390/met11010068
Ahmed, M. M. Z., Habba, M. I. A., Seleman, M. M. E. S., Hajlaoui, K., Ataya, S., Latief, F. H., & EL-Nikhaily, A. E. (2021). Bobbin tool friction stir welding of aluminum thick lap joints: Effect of process parameters on temperature distribution and joints' properties. Materials, 14(16), 4585. https://doi.org/10.3390/ma14164585
Ahmed, M. M. Z., Jouini, N., Alzahrani, B., Seleman, M. M. E., & Jhaheen, M. (2021). Dissimilar friction stir welding of AA2024 and AISI 1018: Microstructure and mechanical properties. Metals, 11(2), 330. https://doi.org/10.3390/met11020330
Ahmed, M. M. Z., Seleman, M. M. E., Fydrych, D., & Çam, G. (2023). Friction stir welding of aluminum in the aerospace industry: The current progress and state-of-the-art review. Materials, 16(8), 2971. https://doi.org/10.3390/ma16082971
Ahmed, M. M. Z., Seleman, M. M. E., Zidan, Z. A., Ramadan, R. M., Ataya, S., & Alsaleh, N. A. (2021). Microstructure and mechanical properties of dissimilar friction stir welded AA2024-T4/AA7075-T6 T-butt joints. Metals, 11(1), 128. https://doi.org/10.3390/met11010128
Boldsaikhan, E., Fukada, S., Fujimoto, M., Kamimuki, K., & Okada, H. (2019). Refill friction stir spot welding of surface-treated aerospace aluminum alloys with faying-surface sealant. Journal of Manufacturing Processes, 42, 113–120. https://doi.org/10.1016/j.jmapro.2019.04.027
Brotzu, A., De Lellis, G., Felli, F., & Pilone, D. (2017). Study of defect formation in Al 7050 alloys. XXIV Italian Group of Fracture Conference, 2017, 3, 246–252. https://doi.org/10.1016/j.prostr.2017.04.015
Bucci, R. J., Warren, C. J., & Starke, E. A. (2000). Need for new materials in aging aircraft structures. Journal of Aircraft, 37(1), 122–129. https://doi.org/10.2514/2.2571

Campanella, D., Buffa, G., Lamia, D., & Fratini, L. (2022). Residual stress and material flow prediction in friction stir welding of Gr2 titanium T-joints. Manufacturing Letters, 33, 249–258.
Campbell, F. C. (2008). Elements of metallurgy and engineering alloys. ASM International.
Charit, I., & Mishra, R. S. (2005). Low temperature superplasticity in a friction-stir-processed ultrafine grained Al-Zn-Mg-Sc alloy. Acta Materialia, 53(15), 4211–4223. https://doi.org/10.1016/j.actamat.2005.05.021
Christner, B., Hansen, M., Skinner, M., & Sylva, G. (2003). Friction stir welding system development for thin gauge aerospace structures. Paper presented at the Proceedings of the 4th International Symposium on Friction Stir Welding, TWI.
De Backer, J., Bolmsjö, G., & Christiansson, A. K. (2014). Temperature control of robotic friction stir welding using the thermoelectric effect. International Journal of Advanced Manufacturing Technology, 70(1–4), 375–383. https://doi.org/10.1007/s00170-013-5279-0
Dursun, T., & Soutis, C. (2014). Recent developments in advanced aircraft aluminium alloys. Materials & Design, 56, 862–871. https://doi.org/10.1016/j.matdes.2013.12.002
Filatov, Y. A., Yelagin, V., & Zakharov, V. (2000). New Al–Mg–Sc alloys. Materials Science and Engineering: A, 280(1), 97–101.
Fu, R. D., Sun, Z. Q., Sun, R. C., Li, Y., Liu, H. J., & Liu, L. (2011). Improvement of weld temperature distribution and mechanical properties of 7050 aluminum alloy butt joints by submerged friction stir welding. Materials & Design, 32(10), 4825–4831. https://doi.org/10.1016/j.matdes.2011.06.021
Fujii, H., Sun, Y. F., Kato, H., & Nakata, K. (2010). Investigation of welding parameter dependent microstructure and mechanical properties in friction stir welded pure Ti joints. Materials Science and Engineering: A, 527(15), 3386–3391. https://doi.org/10.1016/j.msea.2010.02.023
Gain, S., Das, S. K., Acharyya, S. K., & Sanyal, D. (2023). Friction stir welding of industrial grade AISI 316L and P91 steel pipes: A comparative investigation based on mechanical and metallurgical properties. International Journal of Pressure Vessels and Piping, 201, 104865. https://doi.org/10.1016/j.ijpvp.2022.104865
Georgantzia, E., Gkantou, M., & Kamaris, G. S. (2021). Aluminium alloys as structural material: A review of research. Engineering Structures, 227, 111372. https://doi.org/10.1016/j.engstruct.2020.111372
Gomez, A., & Smith, H. (2019). Liquid hydrogen fuel tanks for commercial aviation: Structural sizing and stress analysis. Aerospace Science and Technology, 95, 105438. https://doi.org/10.1016/j.ast.2019.105438
Graf, A. (2021). Aluminum alloys for lightweight automotive structures. In Materials, design and manufacturing for lightweight vehicles (pp. 97–123). Elsevier.
Habba, M. I. A., Alsaleh, N. A., Badran, T. E., Seleman, M. M. E., Ataya, S., El-Nikhaily, A. E., … Ahmed, M. M. Z. (2023). Comparative study of FSW, MIG, and TIG welding of AA5083-H111 based on the evaluation of welded joints and economic aspect. Materials, 16(14), 5124. https://doi.org/10.3390/ma16145124
Han, S. C., Chaudry, U. M., Yoon, J. Y., & Jun, T. S. (2022). Investigating local strain rate sensitivity of the individual weld zone in the friction stir welded DP 780 steel. Journal of Materials Research and Technology, 20, 508–515. https://doi.org/10.1016/j.jmrt.2022.07.125
Hatch, J. E. (1984). Aluminum: Properties and physical metallurgy. ASM International. Hirata, T., Tanaka, T., Chung, S. W., Takigawa, Y., & Higashi, K. (2007). Relationship between deformation behavior and microstructural evolution of friction stir processed Zn–22 wt.% Al alloy. Scripta Materialia, 56(6), 477–480.
Imran, M., & Khan, A. R. A. (2019). Characterization of Al-7075 metal matrix composites: A review. Journal of Materials Research and Technology, 8(3), 3347–3356. https://doi.org/10.1016/j.jmrt.2017.10.012
Ipekoglu, G., Küçükömeroglu, T., Aktarer, S. M., Sekban, D. M., & Çam, G. (2019). Investigation of microstructure and mechanical properties of friction stir welded dissimilar St37/St52 joints. Materials Research Express, 6(4), 046537. https://doi.org/10.1088/2053-1591/aafb9f
Jeshvaghani, R. A., Zohdi, H., Shahverdi, H. R., Bozorg, M., & Hadavi, S. M. M. (2012). Influence of multi-step heat treatments in creep age forming of 7075 aluminum alloy: Optimization for springback, strength and exfoliation corrosion. Materials Characterization, 73, 8–15. https://doi.org/10.1016/j.matchar.2012.05.012
Kallee, S. (2010). Industrial applications of friction stir welding. In Friction stir welding (pp. 118–163). Elsevier.
Kimura, M., Kusaka, M., Seo, K., & Fuji, A. (2005). Joining phenomena during friction stage of A7075-T6 aluminium alloy friction weld. Science and Technology of Welding and Joining, 10(3), 378–383. https://doi.org/10.1179/174329305X40723
Liu, G., Murr, L. E., Niou, C. S., McClure, J. C., & Vega, F. R. (1997). Microstructural aspects of the friction-stir welding of 6061-T6 aluminum. Scripta Materialia, 37(3), 355–361. https://doi.org/10.1016/S1359-6462(97)00093-6
Liu, J., & Kulak, M. (2000). A new paradigm in the design of aluminum alloys for aerospace applications. Aluminium Alloys: Their Physical and Mechanical Properties, 331–337, 127–140. https://doi.org/10.4028/www.scientific.net/MSF.331-337.127
Liu, J., Wu, B. T., Wang, Z. R., Li, C. W., Chen, G. Y., & Miao, Y. G. (2023). Microstructure and mechanical properties of aluminum-steel dissimilar metal welded using arc and friction stir hybrid welding. Materials & Design, 225, 111520. https://doi.org/10.1016/j.matdes.2022.111520
Liu, Z., Fan, Z. Y., Liu, L., Miao, S., Lin, Z. C., Wang, C. G., … Dong, C. L. (2023). Refill friction stir spot welding of AZ31 magnesium alloy sheets: Metallurgical features, microstructure, texture and mechanical properties. Journal of Materials Research and Technology, 23, 3337–3350. https://doi.org/10.1016/j.jmrt.2023.01.151
Lohwasser, D., & Chen, Z. (2010). Friction stir welding: From basics to applications—Introduction. In Friction stir welding (pp. 1–12). https://doi.org/10.1533/9781845697716.1
Mabuwa, S., Msomi, V., Muribwathoho, O., & Motshwanedi, S. S. (2021). The microstructure and mechanical properties of the friction stir processed TIG-welded aerospace dissimilar aluminium alloys. Materials Today: Proceedings, 46, 658–664. https://doi.org/10.1016/j.matpr.2020.11.588
Marlaud, T., Malki, B., Henon, C., Deschamps, A., & Baroux, B. (2011). Relationship between alloy composition, microstructure and exfoliation corrosion in Al-Zn-Mg-Cu alloys. Corrosion Science, 53(10), 3139–3149. https://doi.org/10.1016/j.corsci.2011.05.057
Meikeerthy, S., Ethiraj, N., Neme, I., & Masi, C. (2023). Evaluation of pure titanium welded joints produced by underwater friction stir welding. Advances in Materials Science and Engineering, 2023, 2092339. https://doi.org/10.1155/2023/2092339
Meisnar, M., Bennett, J. M., Andrews, D., Dodds, S., Freeman, R., Bellarosa, R., … Ghidini, T. (2019). Microstructure characterisation of a friction stir welded hemi-cylinder structure using Ti-6Al-4V castings. Materials Characterization, 147, 286–294. https://doi.org/10.1016/j.matchar.2018.11.019
Meng, X., Huang, Y., Cao, J., Shen, J., & dos Santos, J. F. (2021). Recent progress on control strategies for inherent issues in friction stir welding. Progress in Materials Science, 115, 100706.
Mishra, R. S., & Ma, Z. Y. (2005). Friction stir welding and processing. Materials Science & Engineering R-Reports, 50(1–2), 1–78. https://doi.org/10.1016/j.mser.2005.07.001
Mouritz, A. P. (2012). Introduction to aerospace materials. Elsevier. https://doi.org/10.1533/9780857095152
Nirmal, K., & Jagadesh, T. (2021). Numerical simulations of friction stir welding of dual phase titanium alloy for aerospace applications. Materials Today: Proceedings, 46, 4702–4708. https://doi.org/10.1016/j.matpr.2020.10.300
Pandian, V., & Kannan, S. (2020). Numerical prediction and experimental investigation of aerospace-grade dissimilar aluminium alloy by friction stir welding. Journal of Manufacturing Processes, 54, 99–108. https://doi.org/10.1016/j.jmapro.2020.03.001
Polmear, I. (2005). Light alloys: From traditional alloys to nanocrystals. Elsevier.
Prabhu, T. R. (2015). An overview of high-performance aircraft structural Al alloy-AA7085. Acta Metallurgica Sinica-English Letters, 28(7), 909–921. https://doi.org/10.1007/s40195-015-0275-z
Prasad, N. E., & Wanhill, R. J. H. (2017). Aerospace materials and material technologies volume 1: Aerospace materials—Preface. Aerospace Materials and Material Technologies, 1, xv–xvi. https://doi.org/10.1007/978-981-10-2134-3
Rahmatabadi, D., Pahlavani, M., Gholami, M. D., Marzbanrad, J., & Hashemi, R. (2020). Production of Al/Mg-Li composite by the accumulative roll bonding process. Journal of Materials Research and Technology, 9(4), 7880–7886. https://doi.org/10.1016/j.jmrt.2020.05.084
Rahmatabadi, D., Tayyebi, M., Najafizadeh, N., Hashemi, R., & Rajabi, M. (2021). The influence of post-annealing and ultrasonic vibration on the formability of multilayered Al5052/MgAZ31B composite. Materials Science and Technology, 37(1), 78–85. https://doi.org/10.1080/02670836.2020.1867784
Rajan, D., & Prasad, V. (2023). Evaluation of NCMRWF numerical weather prediction models for SHAR region. Advances in Space Research, 71(10), 3981–3994.
Ren, S. R., Ma, Z. Y., & Chen, L. Q. (2008). Effect of initial butt surface on tensile properties and fracture behavior of friction stir welded Al-Zn-Mg-Cu alloy. Materials Science and Engineering: A, 479(1–2), 293–299. https://doi.org/10.1016/j.msea.2007.06.047
Rodríguez, A., Calleja, A., de Lacalle, L. N. L., Pereira, O., González, H., Urbikain, G., & Laye, J. (2019). Burnishing of FSW aluminum Al-Cu-Li components. Metals, 9(2), 260. https://doi.org/10.3390/met9020260
Sabirov, I., Murashkin, M. Y., & Valiev, R. Z. (2013). Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development. Materials Science and Engineering: A, 560, 1–24. https://doi.org/10.1016/j.msea.2012.09.020
Schmid-Fetzer, R., & Zhang, F. (2018). The light alloy Calphad databases PanAl and PanMg. Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, 61, 246–263. https://doi.org/10.1016/j.calphad.2018.04.006
Sharma, K., & Srinivas, G. (2020). Flying smart: Smart materials used in aviation industry. Materials Today: Proceedings, 27, 244–250. https://doi.org/10.1016/j.matpr.2019.10.115
Shepherd, G. E. (2003). The evaluation of friction stir welded joints on airbus aircraft wing structure. Paper presented at the 4th International Symposium on Friction Stir Welding.
Sivaraj, P., Seeman, M., Seetharaman, R., & Balasubramanian, V. (2021). Fracture toughness properties and characteristics of friction stir welded high strength aluminium alloy by post weld heat treatment (PWHT). Materials Today: Proceedings, 43, 2150–2155. https://doi.org/10.1016/j.matpr.2020.11.998
Su, Y., Li, W., Shen, J., Bergmann, L., dos Santos, J. F., Klusemann, B., & Vairis, A. (2022). Comparing the fatigue performance of Ti-4Al-0.005 B titanium alloy T-joints, welded via different friction stir welding sequences. Materials Science and Engineering: A, 859, 144227.
Threadgill, P. L., Leonard, A. J., Shercliff, H. R., & Withers, P. J. (2009). Friction stir welding of aluminium alloys. International Materials Reviews, 54(2), 49–93. https://doi.org/10.1179/174328009X411136
Upadhyay, P., & Reynolds, A. P. (2010). Effects of thermal boundary conditions in friction stir welded AA7050-T7 sheets. Materials Science and Engineering: A, 527(6), 1537–1543. https://doi.org/10.1016/j.msea.2009.10.039
Varghese, J., Rajulapati, K. V., Rao, K. B. S., Meshram, S. D., & Reddy, G. M. (2022). Ambient, elevated temperature tensile properties and origin of strengthening in friction stir welded 6 mm thick reduced activation ferritic-martensitic steel plates in as-welded and post-weld normalised conditions. Materials Science and Engineering: A, 857, 144019. https://doi.org/10.1016/j.msea.2022.144019
Venugopal, T., Rao, K. S., & Rao, K. P. (2004). Studies on friction stir welded AA 7075 aluminum alloy. Transactions of the Indian Institute of Metals, 57(6), 659–663.
Wang, G. Q., Zhao, Y. H., & Hao, Y. F. (2018). Friction stir welding of high-strength aerospace aluminum alloy and application in rocket tank manufacturing. Journal of Materials Science & Technology, 34(1), 73–91. https://doi.org/10.1016/j.jmst.2017.11.041
Wang, G. Q., Zhao, Y. H., & Tang, Y. Y. (2020). Research progress of bobbin tool friction stir welding of aluminum alloys: A review. Acta Metallurgica Sinica-English Letters, 33(1), 13–29. https://doi.org/10.1007/s40195-019-00946-8
Wang, K. Q., Naumov, A., Panchenko, E., & Panchenko, O. (2024). A review on friction stir welding of high-strength Al-Zn-Mg alloy: Insights on second-phase particles. Materials, 17(20), 5107. https://doi.org/10.3390/ma17205107
Wang, K. S., Shen, Y., Yang, X. R., Wang, X. H., & Xu, K. W. (2006). Evaluation of microstructure and mechanical property of FSW welded MB3 magnesium alloy. Journal of Iron and Steel Research International, 13(4), 75–78. https://doi.org/10.1016/S1006-706X(06)60082-4
Yang, Z., Li, J., Zhang, J., Lorimer, G., & Robson, J. (2008). Review on research and development of magnesium alloys. Acta Metallurgica Sinica (English Letters), 21(5), 313.
Yu, H. Z., Jones, M. E., Brady, G. W., Griffiths, R. J., Garcia, D., Rauch, H. A., … Hardwick, N. (2018). Non-beam-based metal additive manufacturing enabled by additive friction stir deposition. Scripta Materialia, 153, 122–130. https://doi.org/10.1016/j.scriptamat.2018.03.025
Zhang, J. L., Song, B., Wei, Q. S., Bourell, D., & Shi, Y. S. (2019). A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends. Journal of Materials Science & Technology, 35(2), 270–284. https://doi.org/10.1016/j.jmst.2018.09.004
Zhang, Z., Tan, Z., Wang, Y., Ren, D., & Li, J. Y. (2023). The relationship between microstructures and mechanical properties in friction stir lap welding of titanium alloy. Materials Chemistry and Physics, 296, 127251. https://doi.org/10.1016/j.matchemphys.2022.127251
Zhou, B., Liu, B., & Zhang, S. G. (2021). The advancement of 7XXX series aluminum alloys for aircraft structures: A review. Metals, 11(5), 718. https://doi.org/10.3390/met11050718

Ayrıntılar

Birincil Dil

İngilizce

Konular

Malzeme Tasarım ve Davranışları

Bölüm

Derleme

Yazarlar

Hasan Onur Tan ^*
0000-0003-3796-9889
Türkiye

Yayımlanma Tarihi

3 Eylül 2026

Gönderilme Tarihi

9 Mart 2026

Kabul Tarihi

11 Ağustos 2026

Yayımlandığı Sayı

Yıl 2026 Cilt: 29 Sayı: 3

IZ

https://izlik.org/JA58RD62YY

Kaynak Göster

APA

Tan, H. O. (2026). MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 29(3), 1386-1398. https://izlik.org/JA58RD62YY

AMA

1.Tan HO. MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29(3):1386-1398. https://izlik.org/JA58RD62YY

Chicago

Tan, Hasan Onur. 2026. “MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 (3): 1386-98. https://izlik.org/JA58RD62YY.

EndNote

Tan HO (01 Eylül 2026) MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29 3 1386–1398.

IEEE

[1]H. O. Tan, “MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW”, Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 3, ss. 1386–1398, Eyl. 2026, [çevrimiçi]. Erişim adresi: https://izlik.org/JA58RD62YY

ISNAD

Tan, Hasan Onur. “MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi 29/3 (01 Eylül 2026): 1386-1398. https://izlik.org/JA58RD62YY.

JAMA

1.Tan HO. MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi. 2026;29:1386–1398.

MLA

Tan, Hasan Onur. “MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW”. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, c. 29, sy 3, Eylül 2026, ss. 1386-98, https://izlik.org/JA58RD62YY.

Vancouver

1.Hasan Onur Tan. MICROSTRUCTURAL EVOLUTION AND MECHANICAL PERFORMANCE OF FRICTION STIR WELDED 7XXX ALUMINUM ALLOYS: A REVIEW. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi [Internet]. 01 Eylül 2026;29(3):1386-98. Erişim adresi: https://izlik.org/JA58RD62YY

Arşiv

Cilt: 29 Sayı: 3 , 03.09.2026

Makale İstatistikleri

Toplam Görüntülenme Sayısı
Toplam İndirilme Sayısı
Toplam Favorilere Ekleme Sayısı

Makale Dosyaları

Tam Metin

DİZİNLENME ve ARŞİVLEME

Bu eser, Creative Commons Atıf 4.0 Uluslararası Lisansı ile lisanslanmıştır.