Strengthening of Cylindrical Steel Water Tank Under the Seismic Loading

Ali İhsan Çelik; Mehmet Metin Köse; Tahir Akgül; Ahmet Celal Apay

doi:10.17780/ksujes.441831

EN TR

Strengthening of Cylindrical Steel Water Tank Under the Seismic Loading

Abstract

Cylindrical steel tanks are widely used to water store and for cooling in nuclear power plants. The seismic behaviour of liquid storage tanks is very complicated due to the hydrodynamic pressures of the fluids in them. In this paper, the epoxy-carbon coating method is suggested to improve of seismic performance of cylindrical steel tanks. Composite epoxy-carbon materials are widely used for winding thin walled cylindrical steel structures. After tank had coated with epoxy–carbon composite material, it was observed that Equivalent (von-Mises) stresses significantly decreased. The maximum hoop stress in the unprotected tank is 81.92 MPa, while the maximum stress is reduced to 44.77 MPa after it was coated with the epoxy-carbon.

Kaynakça

[1] Bayraktar A, Sevim B, Altunışık A C, Türker T. Effect of the model updating on the earthquake behavior of steel storage tanks. J Constr Steel Res, 2010, 66: 462–468
[2] F.H. Hamdan, Seismic behaviour of cylindrical steel liquid storage tanks, J. Constr. Steel Res. 53 (3) (2000) 307–333.
[3] M.A. Haroun, G.W. Housner, Earthquake response of deformable liquid storage tanks, J. Appl. Mech. Trans ASME 48 (2) (1981) 411–418.
[4] B. Hunt, N. Priestley, Seismic water-waves in a storage tank, B Seismol. Soc. Am. 68 (2) (1978) 487–499.
[5] Y. Tang, Dynamic-response of tank containing 2 liquids, J. Eng. Mech. ASCE 119 (3) (1993) 531–548.
[6] A.S. Veletsos, Y. Tang, H.T. Tang, Dynamic-response of flexibly supported liquid storage tanks, J. Struct. Eng. ASCE 118 (1) (1992) 264–283.
[7] Houser, G. W.,“Earthquake Pressures on Fluid Containers”, Eighth Technical Report under Office of Naval Research, Project Designation No. 081 - 095, California Institute of Technology, Pasadena, California, pp. 02-16, Aug.-1954
[8] Housner G W. Dynamic pressures on accelerated fluid containers. Bull Seismol Soc Am, 1957, 47(1): 15–35

[9] Housner G W. The Dynamic Behavior of Water Tanks. Bull Seismol Soc Am, 1963, 53(2): 381–387
[10] Malhotra P K, Wenk T, Wieland M. Simple Procedure for Seismic Analysis of Liquid-Storage Tanks. Struct Eng Int, 2000, 10(3): 197–201
[11] Sunitha K R, Jacob B. Dynamic Buckling Of Steel Water Tank Under Seismic Loading. International Journal of Civil Engineering[Editor1] (IJCE), 2015, 4(6): 81–90
[12] Mohamadshahi M, Afrous A. General considerations in the seismic analysis of steel storage tanks. Journal of Scientific Research and Development[Editor2], 2015, 2(6): 151–156
[13] Brebbia C A, Popov V, Popov V. Thirty-third international conference on Boundary Elements and Other Mesh Reduction Methods XXXIII. Southamption: Wit Press[Editor3], 2011,286, web link: https://books.google.com.tr/books?id=bOwoKUfWONIC&printsec=frontcover&hl=tr#v=onepage&q&f=false
[14] Naghdali H, Hamid K, Masoud G, Ehsan A, Navid K. Comparison of API650-2008 provisions with FEM analyses for seismic assessment of existing steel oil storage tanks. J Loss Prevent Proc Ind 2013;26(4).
[15] J.M. Spritzer, S. Guzey, “Review of API 650 Annex E: Design of large steel welded abovegrounstorage tanks excited by seismic loads”, Thin-Walled Structures 112 (2017) 41–65, 2017.
[16] S. Nicolici, R.M. Bilegan, “Fluid structure interaction modeling of liquid sloshing phenomena in flexible tanks”, Nucl. Eng. Des. 258 (2013) 51–56.
[17] Morozov, Valery V. Vasiliev and Evgny V. Composite materials and structure materials. Elsevier ltd. no. 685, tarih yok.
[18] Daniel, I.M., Ishai, O.,s. Engineering Mechanics of Composite Material. New York: Oxford University Press, 1994.
[19] https://quizlet.com. tarih yok. https://quizlet.com/110694842/ch-9-flash-cards (erişildi: 01 11, 2018).
[20] Dr. Douglas S. Cairns, Lysle A. Wood Distinguished Professor. http://www.montana.edu. 2009.
[21] http://www.montana.edu/dcairns/documents/composites/MSUComposites2009.pdf (evaliable date: 01 11, 2018).
[22] «http://gemite.com.» tarih yok. http://gemite.com/wp-content/uploads/2013/04/Carbon_Structural_Strengt

Ayrıntılar

Birincil Dil

İngilizce

Konular

İnşaat Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Ali İhsan Çelik ^*
0000-0001-7233-7647
Türkiye

Mehmet Metin Köse
0000-0002-7462-1577

Tahir Akgül
0000-0003-4826-9212

Ahmet Celal Apay
0000-0003-4826-9212

Yayımlanma Tarihi

24 Aralık 2018

Gönderilme Tarihi

9 Temmuz 2018

Kabul Tarihi

19 Aralık 2018

Yayımlandığı Sayı

Yıl 2018 Cilt: 21 Sayı: 4

DOI

https://doi.org/10.17780/ksujes.441831

IZ

https://izlik.org/JA47XX88WT

Kaynak Göster

RIS / Bibtex

APA

Çelik, A. İ., Köse, M. M., Akgül, T., & Apay, A. C. (2018). Strengthening of Cylindrical Steel Water Tank Under the Seismic Loading. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 21(4), 334-345. https://doi.org/10.17780/ksujes.441831