Araştırma Makalesi
BibTex RIS Kaynak Göster

HYDROGEN PEROXIDE-INDUCED EXPANSION IN RAW PERLITE BASED LIGHTWEIGHT GEOPOLYMERS: AN EXPERIMENTAL APPROACH

Yıl 2024, , 886 - 895, 03.09.2024
https://doi.org/10.17780/ksujes.1433927

Öz

In modern buildings, it is of great importance that masonry walls are constructed with light and durable materials and at the same time have low thermal conductivity. Increasing lightness, durability and resistance to heat transfer in such elements contributes to reducing heating and cooling loads while reducing the building load. Especially in the production of raw perlite-based lightweight concretes, expansion can be achieved by adding Hydrogen Peroxide (H2O2). In this study, raw perlite-based lightweight structural elements using 1%, 2%, 3% and 4% H2O2 addition were experimentally examined. The results obtained showed that the addition of 3% H2O2 gave the best results, while the addition of 4% caused excessive swelling and structural disintegration in the perlite particles. Additionally, the relationship between bending strength, compressive strength and thermal conductivity performance was evaluated with the H2O2 ratio used.

Proje Numarası

FBA-2023-1119

Kaynakça

  • Alves, C,, Pelisser, F,, Labrincha, J,, & Novais, R, (2023), Effect of Hydrogen Peroxide on the Thermal and Mechanical Properties of Lightweight Geopolymer Mortar Panels, Minerals, 13(4), 542, doi:https://doi,org/10,3390/min13040542,
  • Bai, C,, & Colombo, P, (2018), Processing, properties and applications of highly porous geopolymers: A review, Ceramics International, 44(14), 16103-16118, doi:https://doi,org/10,1016/j,ceramint,2018,05,219,
  • Chen, M,, Liu, P,, Kong, D,, Wang, Y,, Wang, J,, Huang, Y,, Wu, N, (2022), Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials, Construction and Building Materials, 346, 128462, doi:https://10,1016/j,conbuildmat,2022,128462,
  • Ducman, V,, & Korat, L, (2016), Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents, Materials characterization, 113, 207-213,
  • Esmaily, H,, & Nuranian, H, (2012), Non-autoclaved high strength cellular concrete from alkali activated slag, Construction and Building Materials, 26(1), 200-206,
  • Hermann, D, T,, Tome, S,, Shikuku, V, O,, Tchuigwa, J, B,, Spieß, A,, Janiak, C,, Joh Dina, D, D, (2022), Enhanced performance of hydrogen peroxide modified pozzolan-based geopolymer for abatement of methylene blue from aqueous medium, Silicon, 14(10), 5191-5206,
  • Łach, M,, Korniejenko, K,, & Mikuła, J, (2016), Thermal insulation and thermally resistant materials made of geopolymer foams, Procedia Engineering, 151, 410-416, doi:https://doi,org/10,1016/j,proeng,2016,07,350,
  • Li, S,, Li, H,, Yan, C,, Ding, Y,, Zhang, X,, & Zhao, J, (2022), Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete, Materials, 15(17), 6077, doi:https://doi,org/10,3390/ma15176077
  • Li, T,, Wang, Z,, Zhou, T,, He, Y,, & Huang, F, (2019), Preparation and properties of magnesium phosphate cement foam concrete with H2O2 as foaming agent, Construction and Building Materials, 205, 566-573, doi:https://doi,org/10,1016/j,conbuildmat,2019,02,022
  • McLellan, B, C,, Williams, R, P,, Lay, J,, Van Riessen, A,, & Corder, G, D, (2011), Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement, Journal of Cleaner Production, 19(9-10), 1080-1090
  • Novais, R, M,, Buruberri, L,, Ascensão, G,, Seabra, M,, & Labrincha, J, (2016), Porous biomass fly ash-based geopolymers with tailored thermal conductivity, Journal of Cleaner Production, 119, 99-107
  • Provis, J, L,, Palomo, A,, & Shi, C, (2015), Advances in understanding alkali-activated materials, Cement and Concrete Research, 78, 110-125
  • Şahin, M,, Erdoğan, S, T,, & Bayer, Ö, (2018), Production of lightweight aerated alkali-activated slag pastes using hydrogen peroxide, Construction and Building Materials, 181, 106-118, doi:https://doi,org/10,1016/j,conbuildmat,2018,05,267
  • Tamošaitis, G,, Vaičiukynienė, D,, Jaskaudas, T,, Mockiene, J,, & Pupeikis, D, (2023), Development of alkali-activated porous concrete composition from slag waste, Materials, 16(4), 1360, doi:https://doi,org/10,3390/ma16041360
  • Tan, T, H,, Shah, S, N,, Ng, C, C,, Putra, A,, Othman, M, N,, & Mo, K, H, (2022), Insulating foamed lightweight cementitious composite with co-addition of micro-sized aerogel and hydrogen peroxide, Construction and Building Materials, 360, 129485, doi:https://doi,org/10,1016/j,conbuildmat,2022,129485
  • Yang, K,-H,, Song, J,-K,, & Song, K,-I, (2013), Assessment of CO2 reduction of alkali-activated concrete, Journal of Cleaner Production, 39, 265-272, doi:https://doi,org/10,1016/j,jclepro,2012,08,001
  • Zhang, D,, Ding, S,, Ma, Y,, & Yang, Q, (2022), Preparation and Properties of Foam Concrete Incorporating Fly Ash, Materials, 15(18), 6287, doi:https://doi,org/10,3390/ma15186287

HAM PERLİT ESASLI HAFİF GEOPOLİMERLERDE HİDROJEN PEROKSİT KAYNAKLI GENLEŞME: DENEYSEL BİR YAKLAŞIM

Yıl 2024, , 886 - 895, 03.09.2024
https://doi.org/10.17780/ksujes.1433927

Öz

Modern yapılarda yığma duvarların hafif ve dayanıklı malzemelerle inşa edilmesi, aynı zamanda düşük ısı iletkenliğe sahip olması büyük önem taşımaktadır. Bu tür elemanlarda hafiflik, dayanıklılık ve ısı geçişine karşı direncin artırılması bina yükünü azaltırken ısıtma ve soğutma yüklerini azaltmaya katkı sunmaktadır. Özellikle ham perlit temelli hafif betonların üretiminde, Hidrojen Peroksit (H2O2) ilavesiyle genleşme sağlanabilmektedir. Bu çalışmada ise %1, %2, %3 ve %4 oranlarda H2O2 ilavesinin kullanıldığı ham perlit esaslı hafifi yapı elemanlarının deneysel olarak incelemesi yapılmıştır. Elde edilen sonuçlar, %3 oranında H2O2 ilavesinin en iyi sonuçları verdiğini, %4 ilavesiyle perlit taneciklerinde aşırı şişme ve yapısal dağılma meydana geldiğini göstermiştir. Ayrıca, eğilme dayanımı, basınç dayanımı ve ısı iletkenlik performansı arasındaki ilişki, kullanılan H2O2 oranıyla değerlendirilmiştir. TGA ve DTA analizine göre numunenin kütle kaybına uğradığı sıcaklık dereceleri belirlenmiştir.

Destekleyen Kurum

Kayseri Üniversitesi

Proje Numarası

FBA-2023-1119

Teşekkür

Kayseri Üniversitesi Bilimsel Araştırma Projeleri (BAP) birimine desteklerinden dolayı teşekkür ederiz.

Kaynakça

  • Alves, C,, Pelisser, F,, Labrincha, J,, & Novais, R, (2023), Effect of Hydrogen Peroxide on the Thermal and Mechanical Properties of Lightweight Geopolymer Mortar Panels, Minerals, 13(4), 542, doi:https://doi,org/10,3390/min13040542,
  • Bai, C,, & Colombo, P, (2018), Processing, properties and applications of highly porous geopolymers: A review, Ceramics International, 44(14), 16103-16118, doi:https://doi,org/10,1016/j,ceramint,2018,05,219,
  • Chen, M,, Liu, P,, Kong, D,, Wang, Y,, Wang, J,, Huang, Y,, Wu, N, (2022), Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials, Construction and Building Materials, 346, 128462, doi:https://10,1016/j,conbuildmat,2022,128462,
  • Ducman, V,, & Korat, L, (2016), Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents, Materials characterization, 113, 207-213,
  • Esmaily, H,, & Nuranian, H, (2012), Non-autoclaved high strength cellular concrete from alkali activated slag, Construction and Building Materials, 26(1), 200-206,
  • Hermann, D, T,, Tome, S,, Shikuku, V, O,, Tchuigwa, J, B,, Spieß, A,, Janiak, C,, Joh Dina, D, D, (2022), Enhanced performance of hydrogen peroxide modified pozzolan-based geopolymer for abatement of methylene blue from aqueous medium, Silicon, 14(10), 5191-5206,
  • Łach, M,, Korniejenko, K,, & Mikuła, J, (2016), Thermal insulation and thermally resistant materials made of geopolymer foams, Procedia Engineering, 151, 410-416, doi:https://doi,org/10,1016/j,proeng,2016,07,350,
  • Li, S,, Li, H,, Yan, C,, Ding, Y,, Zhang, X,, & Zhao, J, (2022), Investigating the Mechanical and Durability Characteristics of Fly Ash Foam Concrete, Materials, 15(17), 6077, doi:https://doi,org/10,3390/ma15176077
  • Li, T,, Wang, Z,, Zhou, T,, He, Y,, & Huang, F, (2019), Preparation and properties of magnesium phosphate cement foam concrete with H2O2 as foaming agent, Construction and Building Materials, 205, 566-573, doi:https://doi,org/10,1016/j,conbuildmat,2019,02,022
  • McLellan, B, C,, Williams, R, P,, Lay, J,, Van Riessen, A,, & Corder, G, D, (2011), Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement, Journal of Cleaner Production, 19(9-10), 1080-1090
  • Novais, R, M,, Buruberri, L,, Ascensão, G,, Seabra, M,, & Labrincha, J, (2016), Porous biomass fly ash-based geopolymers with tailored thermal conductivity, Journal of Cleaner Production, 119, 99-107
  • Provis, J, L,, Palomo, A,, & Shi, C, (2015), Advances in understanding alkali-activated materials, Cement and Concrete Research, 78, 110-125
  • Şahin, M,, Erdoğan, S, T,, & Bayer, Ö, (2018), Production of lightweight aerated alkali-activated slag pastes using hydrogen peroxide, Construction and Building Materials, 181, 106-118, doi:https://doi,org/10,1016/j,conbuildmat,2018,05,267
  • Tamošaitis, G,, Vaičiukynienė, D,, Jaskaudas, T,, Mockiene, J,, & Pupeikis, D, (2023), Development of alkali-activated porous concrete composition from slag waste, Materials, 16(4), 1360, doi:https://doi,org/10,3390/ma16041360
  • Tan, T, H,, Shah, S, N,, Ng, C, C,, Putra, A,, Othman, M, N,, & Mo, K, H, (2022), Insulating foamed lightweight cementitious composite with co-addition of micro-sized aerogel and hydrogen peroxide, Construction and Building Materials, 360, 129485, doi:https://doi,org/10,1016/j,conbuildmat,2022,129485
  • Yang, K,-H,, Song, J,-K,, & Song, K,-I, (2013), Assessment of CO2 reduction of alkali-activated concrete, Journal of Cleaner Production, 39, 265-272, doi:https://doi,org/10,1016/j,jclepro,2012,08,001
  • Zhang, D,, Ding, S,, Ma, Y,, & Yang, Q, (2022), Preparation and Properties of Foam Concrete Incorporating Fly Ash, Materials, 15(18), 6287, doi:https://doi,org/10,3390/ma15186287
Toplam 17 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular İnşaat Mühendisliği (Diğer)
Bölüm İnşaat Mühendisliği
Yazarlar

Ali İhsan Çelik 0000-0001-7233-7647

Mehmet Cemal Acar 0000-0002-3241-5353

Ufuk Tunç 0000-0002-9986-9456

Ramazan Kayabaşı 0000-0001-6195-7445

Ahmet Şener 0000-0001-7562-7631

Proje Numarası FBA-2023-1119
Yayımlanma Tarihi 3 Eylül 2024
Gönderilme Tarihi 8 Şubat 2024
Kabul Tarihi 11 Mart 2024
Yayımlandığı Sayı Yıl 2024

Kaynak Göster

APA Çelik, A. İ., Acar, M. C., Tunç, U., Kayabaşı, R., vd. (2024). HAM PERLİT ESASLI HAFİF GEOPOLİMERLERDE HİDROJEN PEROKSİT KAYNAKLI GENLEŞME: DENEYSEL BİR YAKLAŞIM. Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 27(3), 886-895. https://doi.org/10.17780/ksujes.1433927